Synthesis and Characterization of a Few Amino-Functionalized Copolymeric Resins and Their Environmental Applications

Contribution of Cross-Linker and Silica Morphology on Cr(VI) Sorption Performances of Organic Anion Exchangers Embedded into Silica Pores

Removal of Cr(VI) from the environment represents a stringent issue because of its tremendous effects on living organisms. In this context, design of sorbents with high sorption capacity for Cr(VI) is getting a strong need. For this purpose, poly(vinylbenzyl chloride), impregnated into porous silica (PSi), was cross-linked with either N,N,N',N'-tetramethyl-1,2-ethylenediamine (TEMED) or N,N,N',N'-tetramethyl-1,3-propanediamine, followed by the reaction of the free -CH2Cl groups with N,N-diethyl-2-hydroxyethylamine to generate strong base anion exchangers (ANEX) inside the pores. The PSi/ANEX composite sorbents were deeply characterized by FTIR spectroscopy, SEM-energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), and water uptake. The sorption performances of composites against Cr(VI) were investigated as a function of pH, contact time, initial concentration of Cr(VI), and temperature. It was found that the cross-linker structure and the silica morphology are the key factors controlling the sorption capacity. The adsorption process was spontaneous and endothermic and well described by pseudo-second-order kinetic and Sips isotherm models. The maximum sorption capacity of 311.2 mg Cr(VI)/g sorbent was found for the composite prepared with mesoporous silica using TEMED as cross-linker. The PSi/ANEX composite sorbents represent an excellent alternative for the removal of Cr(VI) oxyanions, being endowed with fast kinetics, equilibrium in about 60 min, and a high level of reusability in successive sorption/desorption cycles.

Immobilization of chromate in hyperalkaline waste streams by green rusts and zero-valent iron

Zero-valent iron (ZVI) and green rusts can be used as reductants to convert chromium from soluble, highly toxic Cr(VI) to insoluble Cr(III). This study compared the reduction rates of Cr(VI) by ZVI and two carbonate green rust phases in alkaline/hyperalkaline solutions. Batch experiments were carried out with synthetic chromate solutions at pH 7.7-12.3 and a chromite ore processing residue (COPR) leachate (pH approximately 12.2). Green rust removes chromate from high pH solutions (pH 10-12.5) very rapidly (<400 s). Chromate reduction rates for both green rust phases were consistently higher than for ZVI throughout the pH range studied; the surface area normalized rate constants were two orders of magnitude higher in the COPR leachate solution at pH 12.2. The performances of both green rusts were unaffected by changes in pH. In contrast, ZVI exhibited a marked decline in reduction rate with increasing pH to become almost ineffective above pH12.

Porous Copolymer Resins: Tuning Pore Structure and Surface Area with Non Reactive Porogens

In this review, the preparation of porous copolymer resin (PCR) materials via suspension polymerization with variable properties are described by tuning the polymerization reaction, using solvents which act as porogens, to yield microporous, mesoporous, and macroporous materials. The porogenic properties of solvents are related to traditional solubility parameters which yield significant changes in the surface area, porosity, pore volume, and morphology of the polymeric materials. The mutual solubility characteristics of the solvents, monomer units, and the polymeric resins contribute to the formation of porous materials with tunable pore structures and surface areas. The importance of the initiator solubility, surface effects, the temporal variation of solvent composition during polymerization, and temperature effects contribute to the variable physicochemical properties of the PCR materials. An improved understanding of the factors governing the mechanism of formation for PCR materials will contribute to the development and design of versatile materials with tunable properties for a wide range of technical applications.