Mechanism of Carbon−Halogen Bond Reductive Cleavage in Activated Alkyl Halide Initiators Relevant to Living Radical Polymerization: Theoretical and Experimental Study

1,4-Aminoarylation of Butadienes via Photoinduced Palladium Catalysis

A visible-light-induced, three-component palladium-catalyzed 1,4-aminoarylation of butadienes with readily available aryl halides and aliphatic amines has been developed, affording allylamines with excellent E-selectivity. The reaction exhibits exceptional control over chemo-, regio-, and stereoselectivity, a broad substrate scope, and high functional group compatibility, as demonstrated by the late-stage functionalization of bioactive molecules. Mechanistic investigations are consistent with a photoinduced radical Pd(0)-Pd(I)-Pd(II)-Pd(0) Heck-Tsuji-Trost allylation cascade.

Reactivity Prediction of Cu-Catalyzed Halogen Atom Transfer Reactions Using Data-Driven Techniques

In catalysis, linear free energy relationships (LFERs) are commonly used to identify reaction descriptors that enable the prediction of outcomes and the design of more effective catalysts. Herein, LFERs are established for the reductive cleavage of the C(sp3)-X bond in alkyl halides (RX) by Cu complexes. This reaction represents the activation step in atom transfer radical polymerization and atom transfer radical addition/cyclization. The values of the activation rate constant, kact, for 107 Cu complex/RX couples in 5 different solvents spanning over 13 orders of magnitude were effectively interpolated by the equation: log kact = sC(I + C + S), where I, C, and S are, respectively, the initiator, catalyst, and solvent parameters, and sC is the catalyst-specific sensitivity parameter. Furthermore, each of these parameters was correlated to relevant descriptors, which included the bond dissociation free energy of RX and its Tolman cone angle θ, the electron affinity of X, the radical stabilization energy, the standard reduction potential of the Cu complex, the polarizability parameter π* of the solvent, and the distortion energy of the complex in its transition state. This set of descriptors establishes the fundamental properties of Cu complexes and RX that determine their reactivity and that need to be considered when designing novel systems for atom transfer radical reactions. Finally, a multivariate linear regression (MLR) approach was adopted to develop an objective model that surpassed the predictive capability of the LFER equation. Thus, the MLR model was employed to predict kact values for >2000 Cu complex/RX pairs.

Theoretical investigation of Aryl/Alkyl halide reduction with hydrated electrons from energy and AIMD aspects

CONTEXT

In this study, the reactions of hydrated electron (e^-(aq)) with alkyl and aryl halides were simulated with an ab initial molecular dynamics (AIMD) method to reveal the underlying mechanism. An original protocol was developed for preparing the proper initial wavefunction guess of AIMD, in which a single electron was curled in a tetrahedral cavity of four water molecules. Our results show that the stability of e^-(aq) increases with the hydrogen bond grid integrity. The organic halides prefer to react with e^-(aq) in neutral or alkaline environment, while they are more likely to react with hydrogen radical (the product of e^-(aq) and proton) under acidic conditions. The reaction between fluorobenzene/fluoromethane and hydrogen radical is considered as the least favorable reaction due to the highest reaction barriers. The bond dissociation energy (BDE) suggested that the cleavage of the carbon-halogen bond of their anion radical might be a thermodynamically favorable reaction. AIMD results indicated that the LUMO or higher orbitals were the e^-(aq) migration destination. The transplanted electron enhanced carbon-halogen bond vibration intensively, leading to bond cleavage. The solvation process of the departing halogen anions was observed in both fluorobenzene and fluoromethane AIMD simulation, indicating that it might have a significant effect on enthalpy. Side reactions and byproducts obtained during the AIMD simulation suggested the complexity of the e^-(aq) reactions and further investigation was needed to fully understand the reaction mechanisms. This study provided theoretical insight into the pollutant environmental fate and constructed a methodological foundation for AIMD simulation of analogous free radical reactions.

METHODS

The theoretical calculation was conducted on the combination of Gaussian16 and ORCA5.0.3 software packages. The initial geometries, as well as the wavefunction initial guesses, were obtained at PBE0/ma-def2-TZVP/IEFPCM-water level in Gaussian16 unless otherwise stated. AIMD simulations were performed at the same level in ORCA. Wavefunction analysis was carried out with Multiwfn. The details methods were described in the section "Computational details" section.

Electrosynthetic C-O Bond Activation in Alcohols and Alcohol Derivatives

Alcohols and their derivatives are ubiquitous and versatile motifs in organic synthesis. Deoxygenative transformations of these compounds are often challenging due to the thermodynamic penalty associated with the cleavage of the C-O bond. However, electrochemically driven redox events have been shown to facilitate the C-O bond cleavage in alcohols and their derivatives either through direct electron transfer or through the use of electron transfer mediators and electroactive catalysts. Herein, a comprehensive overview of preparative electrochemically mediated protocols for C-O bond activation and functionalization is detailed, including direct and indirect electrosynthetic methods, as well as photoelectrochemical strategies.

Solvent Coordination Effect on Copper-Based Molecular Catalysts for Controlled Radical Polymerization

The equilibrium of copper-catalyzed atom transfer radical polymerization was investigated in silico with the aim of finding an explanation for the experimentally observed solvent effect. Various combinations of alkyl halide initiators and copper complexes in acetonitrile (MeCN) and dimethyl sulfoxide (DMSO) were taken into consideration. A continuum model for solvation, which does not account for the explicit interactions between the solvent and metal complex, is not adequate and does not allow the reproduction of the experimental trend. However, when the solvent molecules are included in the coordination sphere of the copper(I,II) species and the continuum description of the medium is still used, a solvent dependence of process thermodynamics emerges, in fair agreement with experimental trends.

Photoinduced Ion-Pair Inner-Sphere Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L₂B]⁺X^- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L₂B]^• are supported by electron paramagnetic resonance (EPR) radical capture experiments, ¹H/¹¹B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L₂B]⁺] ≥ 0.6, it is static quenching because of the in situ formation of [L₂B]⁺[ZCS₂]^-, the real catalytic species. [L₂B]⁺[C₃H₇SCS₂]^- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L₂B]⁺[ZCS₂]^- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C₃H₇SCS₂] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.

Research progress on preparation methods of water-soluble polyaniline

The application of polyaniline (PANI) in various fields is greatly limited by its poor solubility in water.Many methods which could elevate PANI water-soluble ability were used by researchers to expand its application range. In this paper, the research progress of the commonly used preparation methods of water-soluble PANI in recent years is reviewed. The main preparation methods of water-soluble PANI are categorized into four types including monomer modification, controlling the polymerization process, introducing water-soluble groups or substances, macromolecular reaction. They are composed of aniline derivative method, copolymerization, emulsion polymerization method, dispersion polymerization method, acid doping method, compound method, ATRP method. The principles of various methods to achieve water-solubility of PANI are introduced, the research on each preparation method reported before are introduced and their advantages and disadvantages are summarized.

Electrochemical Investigation of Iron-Catalyzed Atom Transfer Radical Polymerization

Use of iron-based catalysts in atom transfer radical polymerization (ATRP) is very interesting because of the abundance of the metal and its biocompatibility. Although the mechanism of action is not well understood yet, iron halide salts are usually used as catalysts, often in the presence of nitrogen or phosphorous ligands (L). In this study, electrochemically mediated ATRP (eATRP) of methyl methacrylate (MMA) catalyzed by FeCl3, both in the absence and presence of additional ligands, was investigated in dimethylformamide. The electrochemical behavior of FeCl3 and FeCl3/L was deeply investigated showing the speciation of Fe(III) and Fe(II) and the role played by added ligands. It is shown that amine ligands form stable iron complexes, whereas phosphines act as reducing agents. eATRP of MMA catalyzed by FeCl3 was investigated in different conditions. In particular, the effects of temperature, catalyst concentration, catalyst-to-initiator ratio, halide ion excess and added ligands were investigated. In general, polymerization was moderately fast but difficult to control. Surprisingly, the best results were obtained with FeCl3 without any other ligand. Electrogenerated Fe(II) effectively activates the dormant chains but deactivation of the propagating radicals by Fe(III) species is less efficient, resulting in dispersity > 1.5, unless a high concentration of FeCl3 is used.

Glycopolymer-Based Materials: Synthesis, Properties, and Biosensing Applications

Glycopolymer materials have emerged as a significant biopolymer class that has piqued the scientific community's attention due to their potential applications. Recently, they have been found to be a unique synthetic biomaterial; glycopolymer materials have also been used for various applications, including direct therapeutic methods, medical adhesives, drug/gene delivery systems, and biosensor applications. Therefore, for the next stage of biomaterial research, it is essential to understand current breakthroughs in glycopolymer-based materials research. This review discusses the most widely utilized synthetic methodologies for glycopolymer-based materials, their properties based on structure–function interactions, and the significance of these materials in biosensing applications, among other topics. When creating glycopolymer materials, contemporary polymerization methods allow precise control over molecular weight, molecular weight distribution, chemical activity, and polymer architecture. This review concludes with a discussion of the challenges and complexities of glycopolymer-based biosensors, in addition to their potential applications in the future.

Atom Transfer Radical Polymerization: A Mechanistic Perspective

Since its inception, atom transfer radical polymerization (ATRP) has seen continuous evolution in terms of the design of the catalyst and reaction conditions; today, it is one of the most useful techniques to prepare well-defined polymers as well as one of the most notable examples of catalysis in polymer chemistry. This Perspective highlights fundamental advances in the design of ATRP reactions and catalysts, focusing on the crucial role that mechanistic studies play in understanding, rationalizing, and predicting polymerization outcomes. A critical summary of traditional ATRP systems is provided first; we then focus on the most recent developments to improve catalyst selectivity, control polymerizations via external stimuli, and employ new photochemical or dual catalytic systems with an outlook to future research directions and open challenges.

Electrochemically activated carbon-halogen bond cleavage and C-C coupling monitored by in situ shell-isolated nanoparticle-enhanced Raman spectroscopy

The electroreductive cleavage of carbon-halogen bonds has attracted increasing attention in both electrosynthesis and pollution remediation. Herein, by employing the in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique, we have successfully investigated the electroreductive dehalogenation process of aryl halides with the thiol group on a smooth Au electrode in aqueous solution at different pH values. The obtained potential-dependent Raman spectra directly reveal a mixture of the reduction products 4,4'-biphenyldithiol (BPDT) and thiophenol (TP). The conversion ratios of the C-Cl and C-Br bonds at pH = 7 are 37% and 55%, respectively. Furthermore, quantitative analysis of the intensity variations of ν(C-Cl), ν(C-Br) and aromatic ν(CC) stretching modes suggests electroreductive dehalogenation via both direct electron transfer reduction and electrocatalytic hydrodehalogenation. Molecular evidence for the C-C cross coupling process through TP reaction with benzene free radical intermediates is found at negative potentials, which leads to the increasing selectivity of biphenyl products.

Computational Design of Next Generation At-om Transfer Radical Polymerization Ligands

Benchmarked density functional theory is used to design and evaluate a series of novel atom transfer radical polymerization (ATRP) catalysts with a view to identifying those which best promote a...

Electrochemistry for Atom Transfer Radical Polymerization

Atom Transfer Radical Polymerization (ATRP) is the most powerful and most employed technology of Controlled Radical Polymerization (CRP) to produce polymers with well-defined architecture, that is, composition, topology, and functionality. Several hundreds of papers are published every year on ATRP processes, mainly based on empiric experimental procedures. Electrochemistry powerfully entered in the field of ATRP about 10 years ago, providing important contributions both to the further development of the process and to a better understanding of its mechanism. Five main issues took advantage of electrochemistry and/or its synergism with ATRP: i) understanding the mechanism of ATRP activation; ii) determination of thermodynamic parameters; iii) determination of activation and deactivation rate constants; iv) the SARA ATRP vs SET-LRP dispute: the role of Cu⁰ ; v) electrochemically-mediated ATRP.

Reactivity of CuIN4 Flattened Complexes: Interplay between Coordination Geometry and Ligand Flexibility

The relation between redox activity and coordination geometry in Cu^IN₄ complexes indicates that more flattened structures tend to be more reactive. Such a preorganization of the ligand confers to the complex geometries closer to a transition state, which has been termed the "entatic" state in metalloproteins, more recently extending this concept for copper complexes. However, many aspects of the redox chemistry of Cu^I complexes cannot be explained only by flattening. For instance, the role of ligand flexibility in this context is an open debate nowadays. To analyze this point, we studied oxidation properties of a series of five monometallic Cu^I Schiff-base complexes, [Cu^I(L_n)]⁺, which span a range of geometries from a distorted square planar (n = 3) to a distorted tetrahedron (n = 6, 7). This stepped control of the structure around the Cu^I atom allows us to explore the effect of the flattening distortion on both the electronic and redox properties through the series. Experimental studies were complemented by a theoretical analysis based on density functional theory calculations. As expected, oxidation was favored in the flattened structures, spanning a broad potential window of 370 mV for the complete series. This orderly behavior was tested in the reductive dehalogenation reaction of tetrachloroethane (TCE). Kinetic studies show that Cu^I oxidation by TCE is faster as the flattening distortion is higher and the oxidation potentials of the metal are lower. However, the most reactive complex was not the more planar, contradicting the trend expected from oxidation potentials. The origin of this irregularity is related to ligand flexibility and its connection with the atom/electron transfer reaction path, highlighting the need to consider effects beyond flattening distortion to better understand the reactivity of this important class of complexes.

Electrocatalytic Deuteration of Halides with D2 O as the Deuterium Source over a Copper Nanowire Arrays Cathode

Precise deuterium incorporation with controllable deuterated sites is extremely desirable. Here, a facile and efficient electrocatalytic deuterodehalogenation of halides using D₂ O as the deuteration reagent and copper nanowire arrays (Cu NWAs) electrochemically formed in situ as the cathode was demonstrated. A cross-coupling of carbon and deuterium free radicals might be involved for this ipso-selective deuteration. This method exhibited excellent chemoselectivity and high compatibility with the easily reducible functional groups (C=C, C≡C, C=O, C=N, C≡N). The C-H to C-D transformations were achieved with high yields and deuterium ratios through a one-pot halogenation-deuterodehalogenation process. Efficient deuteration of less-active bromide substrates, specific deuterium incorporation into top-selling pharmaceuticals, and oxidant-free paired anodic synthesis of high-value chemicals with low energy input highlighted the potential practicality.

Poly (Ethylene Oxide)-Based Block Copolymer Electrolytes Formed via Ligand-Free Iron-Mediated Atom Transfer Radical Polymerization

The Br-terminated poly (ethylene oxide) (PEO-Br) is used as a green and efficient macroinitiator in bulk Fe-catalyzed atom transfer radical polymerization (ATRP) without the addition of any organic ligands. The polymerization rate is able to be mediated by PEO-Br with various molecular weights, and the decrease in redox potential of FeBr₂ in cyclic voltammetry (CV) curves indicates that an increased coordination effect is deteriorated with the depressing reaction activity in the longer ethylene oxide (EO) chain in PEO-Br. In combination with the study of different catalysts and catalytic contents, the methyl metharylate (MMA) or poly (ethylene glycol) monomethacrylate (PEGMA) was successfully polymerized with PEO-Br as an initiator. This copolymer obtained from PEGMA polymerization can be further employed as a polymer matrix to form the polymer electrolyte (PE). The higher ionic conductivity of PE was obtained by using a high molecular weight of copolymer.

A directing group-assisted ruthenium-catalyzed approach to access meta-nitrated phenols

meta-Selective C–H nitration of phenol derivatives was developed using a Ru-catalyzed σ-activation strategy. Cu(NO₃)₂·3H₂O was employed as the nitrating source, whereas Ru₃(CO)₁₂ was found to be the most suitable metal catalyst for the protocol.

Mechanistically Guided Predictive Models for Ligand and Initiator Effects in Copper-Catalyzed Atom Transfer Radical Polymerization (Cu-ATRP)

Copper-catalyzed atom transfer radical polymerization (Cu-ATRP) is one of the most widely used controlled radical polymerization techniques. Notwithstanding the extensive mechanistic studies in the literature, the transition states of the activation/deactivation of the growing polymer chain, a key equilibrium in Cu-ATRP, have not been investigated computationally. Therefore, the understanding of the origin of ligand and initiator effects on the rates of activation/deactivation is still limited. Here, we present the first computational analysis of Cu-ATRP activation transition states to reveal factors that affect the rates of activation and deactivation. The Br atom transfer between the polymer chain and the Cu catalyst occurs through an unusual bent geometry that involves pronounced interactions between the polymer chain end and the ancillary ligand on the Cu catalyst. Therefore, the rates of activation/deactivation are determined by both the electronic properties of the Cu catalyst and the ligand-initiator steric repulsions. In addition, our calculations revealed the important role of ligand backbone flexibility on the activation. These theoretical analyses led to the identification of three chemically meaningful descriptors, namely HOMO energy of the catalyst ( EHOMO), percent buried volume ( Vbur%), and distortion energy of the catalyst (Δ Edist), to describe the electronic, steric, and flexibility effects on reactivity, respectively. A robust and simple predictive model for ligand effect on reactivity is thereby established by correlating these three descriptors with experimental activation rate constants using multivariate linear regression. Validation using a structurally diverse set of ligands revealed the average error is less than ±2 kcal/mol compared to the experimentally derived activation energies. The same approach was also applied to develop a predictive model for reactivity of different alkyl halide initiators using R-X bond dissociation energy (BDE) and Cu-X halogenophilicity as descriptors.

Metal Free Reversible-Deactivation Radical Polymerizations: Advances, Challenges, and Opportunities

A considerable amount of the worldwide industrial production of synthetic polymers is currently based on radical polymerization methods. The steadily increasing demand on high performance plastics and tailored polymers which serve specialized applications is driven by the development of new techniques to enable control of polymerization reactions on a molecular level. Contrary to conventional radical polymerization, reversible-deactivation radical polymerization (RDRP) techniques provide the possibility to prepare polymers with well-defined structures and functionalities. The review provides a comprehensive summary over the development of the three most important RDRP methods, which are nitroxide mediated radical polymerization, atom transfer radical polymerization and reversible addition fragmentation chain transfer polymerization. The focus thereby is set on the newest developments in transition metal free systems, which allow using these techniques for biological or biomedical applications. After each section selected examples from materials synthesis and application to biomedical materials are summarized.

Theoretical basis for the stabilization of charges by radicals on electrified polymers

Quantum mechanical calculations at various levels of theory indicate that charges (both "+" and "-") on organic polymers can be stabilized by radicals on nearby polymer chains. The stabilization mechanism is based on the formation of intermolecular odd-electron, two-center bonds with possible concomitant spin density redistribution (depending on the polymer and the number and type of proximal heteroatoms). This result is in line with our previous experimental demonstrations that on various types of polymers charged by contact electrification, radicals co-localize and help stabilize proximal charges (of either polarity). The principle of intramolecular charge-radical stabilization we now confirm on a fundamental level might have ramifications for the design of other macromolecular systems in which chemical reactivity is controlled by radicals flanking the charged groups or by charged groups flanking the radicals.

Electron-transfer reactions of halogenated electrophiles: a different look into the nature of halogen bonding

The rates of oxidation of ferrocene derivatives by brominated molecules R-Br (CBr₃CN, CBr₄, CBr₃NO₂, CBr₃COCBr₃, CBr₃CONH₂, CBr₃F, and CBr₃H) were consistent with the predictions of the outer-sphere dissociative electron-transfer theory. The similar redox-reactions of the R-Br electrophiles with the typical halogen-bond acceptors tetramethyl-p-phenylenediamine (TMPD) or iodide were much faster than calculated using the same model. The fast redox-processes in these systems were related to the involvement of the transient halogen-bonded [R-Br, TMPD] or [R-Br, I⁻] complexes in which barriers for electron transfer were lowered by the strong electronic coupling of reactants. The Mulliken–Hush treatment of the spectral and structural characteristics of the [R-Br, TMPD] or [R-Br, I⁻] complexes corroborated the values of coupling elements, H_ab, of 0.2–0.5 eV implied by the kinetic data. The Natural Bond Orbital analysis of these complexes indicated a noticeable donor/acceptor charge transfer, Δq, of 0.03–0.09 ē. The H_ab and Δq values in the [R-Br, TMPD] and [R-Br, I⁻] complexes (which are similar to those in the traditional charge-transfer associates) indicate significant contribution of charge-transfer (weakly-covalent) interaction to halogen bonding. The decrease of the barrier for electron transfer between the halogen-bonded reactants demonstrated in the current work points out that halogen bonding should be taken into account in the mechanistic analysis of the reactions of halogenated species.

Size controllable redispersion of sintered Au nanoparticles by using iodohydrocarbon and its implications

Downsizing large Au particles into small particles with controllable size remains challenging. In this study, we redispersed large sintered Au particles on activated carbon (Au/C) to highly dispersed nanoparticles with uniform distribution and controllable size after treatment with iodohydrocarbons. The Au/C catalyst was conducted for a number of deactivation/regeneration cycles with negligible deterioration in catalytic performance for acetylene hydrochlorination. The redispersion behavior reveals a reverse agglomeration process in the presence of iodohydrocarbons under mild conditions. This behavior is significantly related to the C-I bond dissociation energy (BDE) and adsorption of iodic species on Au particles. A novel protocol for controlling the size and predicting the redispersion efficiency of Au particles is established by correlating with the C-I BDEs of iodohydrocarbons. The molecular-level interpretation of redispersion provides a thorough mechanism based on experimental results. This study presents an efficient method for the easy regeneration of sintered Au-based catalysts for practical applications.