Insights into the Origin of the Separation Selectivity with Silica Hydride Adsorbents

Silica Hydride: A Separation Material Every Analyst Should Know About

This review describes the development, special features and applications of silica hydride-based stationary phases for HPLC. The unique surface of this material is in contrast to ordinary, standard silica, which is the material most frequently used in modern HPLC stationary phases. The standard silica surface contains mainly silanol (Si-OH) groups, while the silica hydride surface is instead composed of silicon-hydrogen groups, which is much more stable, less reactive and delivers different chromatographic and chemical characteristics. Other aspects of this material are described for each of the different bonded moieties available commercially. Some applications for each of these column types are also presented as well as a generic model for method development on silica hydride-based stationary phases.

Chromatographic characterization of a silica hydride-based amide stationary phase

An amide phase based on a porous silica hydride support material is tested for retention characteristics in both the reversed-phase and aqueous normal-phase modes. A series of retention maps (capacity factor vs. mobile phase composition) were obtained using reference standards of varying analyte sizes, functionalities, and polarities. An assessment of the specific column selectivity is made and classes of compounds are identified that show high potential for effective retention, resolution, and efficiency when using amide functionalized silica hydride columns for reversed-phase and aqueous-normal phase separation. Several practical applications are presented that illustrate the capabilities of this particular column format.

Ammonium Fluoride as Suitable Additive for HILIC-Based LC-HRMS Metabolomics

Hydrophilic Interaction Liquid Chromatography (HILIC) chromatography is widely applied in metabolomics as a complementary strategy to reverse phase chromatography. Nevertheless, it still faces several issues in terms of peak shape and compounds ionization, limiting the automatic de-convolution and data semi-quantification performed through dedicated software. A way to improve the chromatographic and ionization performance of a HILIC method is to modify the electrostatic interactions of the analytes with both mobile and stationary phases. In this study, using a ZIC-HILIC chromatographic phase, we evaluated the performance of ammonium fluoride (AF) as additive salt, comparing its performance to ammonium acetate (AA). Three comparative criteria were selected: (1) identification and peak quality of 34 standards following a metabolomics-specific evaluation approach, (2) an intraday repeatability test with real samples and (3) performing two real metabolomics fingerprints with the AF method to evaluate its inter-day repeatability. The AF method showed not only higher ionization efficiency and signal-to-noise ratio but also better repeatability and robustness than the AA approach. A tips and tricks section is then added, aiming at improving method replicability for further users. In conclusion, ammonium fluoride as additive salt presents several advantages and might be considered as a step forward in the application of robust HILIC methods in metabolomics.

The Development of Silica Hydride Stationary Phases for High-Performance Liquid Chromatography from Conception to Commercialization

The development of a stationary phase material for high-performance liquid chromatography based on a surface of silica hydride as opposed to silanols on ordinary silica is discussed including synthetic approaches, characterization, and applications. There are several synthetic approaches available to create a silica hydride surface. Modification of the Si–H moiety on the silica surface can be accomplished through the use of a hydrosilation reaction. Both the intermediate silica hydride and the material modified with an organic moiety can be characterized by a number of spectroscopic as well as a variety of other methods. Further insights into the retention mechanism are provided through chromatographic measurements. The ultimate utility of any chromatographic stationary phase material is determined by its success in solving challenging analytical problems. A broad range of applications is reviewed to illustrate the versatility and usefulness of silica hydride-based stationary phases.

Rapid analysis of pyridinoline and deoxypyridinoline in biological samples by liquid chromatography with mass spectrometry and a silica hydride column

Pyridinoline and deoxypyridinoline crosslinks are biomarkers found in urine for collagen degradation in bone turnover. For the first time, a rapid, sensitive, and ion-pairing free method is described for the analysis of pyridinoline and deoxypyridinoline using ultra-high performance liquid chromatography with Cogent Diamond Hydride column and detection by Q Exactive hybrid quadrupole-orbitrap high resolution accurate mass spectrometry. The separation was achieved using both isocratic and gradient conditions and run time <5 min under isocratic conditions of 20% acetonitrile in water containing 0.1% formic acid. Pyridoxine was used as an internal standard and relative standard deviation of the retention times of both pyridinoline and deoxypyridinoline were <1%. The limit of detection was 0.082 ± 0.023 μM for pyridinoline and 0.118 ± 0.052 μM for deoxypyridinoline. The limit of quantitation was 0.245 ± 0.070 μM for pyridinoline and 0.354 ± 0.157 μM for deoxypyridinoline. The method was validated by the detection and quantitation of both pyridinoline and deoxypyridinoline in skin and urine samples.

Origin of the selectivity differences of aromatic alcohols and amines of different n-alkyl chain length separated with perfluorinated C8 and bidentated C8 modified silica hydride stationary phases

Perfluorinated C8-(PerfluoroC8) and bidentate anchored C8-(BDC8)-modified silica hydride stationary phases have been employed for the isocratic separation of homologous phenylalkanols and phenylalkylamines differing in their n-alkyl chain length, using aqueous-acetonitrile (ACN) mobile phases of different ACN contents from 10 to 90% (v/v) in 10% increments. These analytes showed reversed-phase (RP) retention behaviour with mobile phases of <40% (v/v) ACN content with both stationary phases but with the BDC8 stationary phase providing longer retention. The PerfluoroC8, but not the BDC8, stationary phase also exhibited significant retention of these analytes under conditions typical of an aqueous normal phase (ANP) mode (i.e. with mobile phases of >80% (v/v) ACN content), with the analytes exhibiting overall U-shape retention dependencies on the ACN content of the mobile phase. Further, these stationary phases showed differences in their selectivity behaviour with regard to the n-alkyl chain lengths of the different analytes. These observations could not be explained in terms of pK _a , log P, molecular mass or linear solvation energy concepts. However, density functional theory (DFT) simulations provided a possible explanation for the observed selectivity trends, namely differences in the molecular geometries and structural organisation of the immobilised ligands of these two stationary phases under different solvational conditions. For mobile phase conditions favouring the RP mode, these DFT simulations revealed that interactions between adjacent BDC8 ligands occur, leading to a stationary phase with a more hydrophobic surface. Moreover, under mobile phase conditions favouring retention of the analytes in an ANP mode, these interactions of the bidentate-anchored C8 ligands resulted in hindered analyte access to potential ANP binding sites on the BDC8 stationary phase surface. With the PerfluoroC8 stationary phase, the DFT simulations revealed strong repulsion of individual perfluoroC8 ligand chains, with the perfluoroC8 ligands of this stationary phase existing in a more open brush-like state (and with a less hydrophobic surface) compared to the BDC8 ligands. These DFT simulation results anticipated the chromatographic findings that the phenylalkanols and phenylalkylamines had reduced retention in the RP mode with the PerfluoroC8 stationary phase. Moreover, the more open ligand structure of the PerfluoroC8 stationary phase enabled greater accessibility of the analytes to water solvated binding sites on the stationary phase surface under mobile phase conditions favouring an ANP retention mode, leading to retention of the analytes, particularly the smaller phenylalkylamines, via hydrogen bonding and electrostatic effects.

Plant Metabolomics: Maximizing Metabolome Coverage by Optimizing Mobile Phase Additives for Nontargeted Mass Spectrometry in Positive and Negative Electrospray Ionization Mode

Nontargeted screening methods with ultrahigh-performance liquid chromatography-electrospray ionization/quadrupole-time-of-flight mass spectrometry have been extensively applied to plant metabolomics to very diverse scientific issues in plant metabolomics. In this study, different mobile phase additives were tested in order to improve the electrospray ionization process and to detect as many metabolites as possible with high peak intensities in positive and negative ionization mode. Influences of modifiers were examined for nonpolar and polar compounds, as optimal conditions are not always the same. By combining different additives, metabolite coverage could be significantly increased. The best results for polar metabolites in positive ionization mode were achieved by using 0.1% acetic acid and 0.1% formic acid in negative ionization mode. For measurements of nonpolar metabolites in positive ionization mode, the application of 10 mmol/L ammonium formate led to the best findings, while the use of 0.02% acetic acid was more appropriate in negative ionization mode.

Investigations into the separation behaviour of perfluorinated C8 and undecanoic acid modified silica hydride stationary phases

In this study, the surface charge properties of perfluorinated C8 (PerfluoroC8) and undecanoic acid (UDA) modified silica hydride stationary phases have been investigated. The zeta potential values of these stationary phases were measured in aqueous/acetonitrile mobile phases of different pH, buffer concentrations and acetonitrile contents. The retention behaviour of several basic, acidic and neutral compounds were then examined with these two stationary phases, with U-shaped retention dependencies evident with regard to the organic solvent content of the mobile phase. Plots of the logarithmic retention factor versus buffer concentration revealed slopes ≥ -0.41 for both stationary phases, indicating the involvement of mixed mode retention mechanisms with contributions from both ionic and non-ionic interactions. Using a linear solvation energy relationship approach, the origins of these interactions under different mobile phase conditions were differentiated and quantified. The PerfluoroC8 stationary phase exhibited stronger retention for basic compounds under high acetonitrile content mobile phase conditions, whilst stronger retention was observed for all compounds with the UDA stationary phase under high aqueous content mobile phase conditions. The more negative zeta potentials of the UDA stationary phase correlated with higher total charge density, surface charge density and charge density at the beta plane (the outer plane of the double layer) compared to the PerfluoroC8 stationary phase. With mobile phases of low buffer concentrations, more negative zeta potential values were unexpectedly observed for the PerfluoroC8 stationary phase with slight increases in the C descriptor value, reflecting also the greater accessibility of the analytes to the stationary phase surface. Comparison of the retention behaviours on these phases with other types of silica hydride stationary phases has revealed different patterns of selectivity.

Ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography

The use of ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography with silica hydride-based stationary phases and mass spectrometry detection is evaluated. Retention times, peak shape, efficiency and peak intensity are compared to the more standard additives formic acid and ammonium formate. The test solutes were NAD, 3-hydroxyglutaric acid, α-ketoglutaric acid, p-aminohippuric acid, AMP, ATP, aconitic acid, threonine, N-acetyl carnitine, and 3-methyladipic acid. The column parameters are assessed in both the positive and negative ion detection modes. Ammonium fluoride is potentially an aggressive mobile phase additive that could have detrimental effects on column lifetime. Column reproducibility is measured and the effects of switching between different additives are also tested.