Polymerization-Amplified Optical DNA Detection on Porous Silicon Templates

Controlled/“living” radical polymerization-based signal amplification strategies for biosensing

Controlled/“living” radical polymerization-based signal amplification strategies and their applications in highly sensitive biosensing of clinically relevant biomolecules are reviewed.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Non-invasive, in vitro analysis of islet insulin production enabled by an optical porous silicon biosensor

A label-free porous silicon (pSi) based, optical biosensor, using both an antibody and aptamer bioreceptor motif has been developed for the detection of insulin. Two parallel biosensors were designed and optimised independently, based on each bioreceptor. Both bioreceptors were covalently attached to a thermally hydrosilylated pSi surface though amide coupling, with unreacted surface area rendered stable and low fouling by incorporation of PEG moieties. The insulin detection ability of each biosensor was determined using interferometric reflectance spectroscopy, using a range of different media both with and without serum. Sensing performance was compared in terms of response value, response time and limit of detection (LOD) for each platform. In order to demonstrate the capability of the best performing biosensor to detect insulin from real samples, an in vitro investigation with the aptamer-modified surface was performed. This biosensor was exposed to buffer conditioned by glucose-stimulated human islets, with the result showing a positive response and a high degree of selectivity towards insulin capture. The obtained results correlated well with the ELISA used in the clinic for assaying glucose-stimulated insulin release from donor islets. We anticipate that this type of sensor can be applied as a rapid point-of-use biosensor to assess the quality of donor islets in terms of their insulin production efficiency, prior to transplantation.

Femtomole Detection of Proteins Using a Label-Free Nanostructured Porous Silicon Interferometer for Perspective Ultrasensitive Biosensing

Nanostructured porous silicon (PS) is a promising material for label-free optical detection of biomolecules, though it currently suffers of limited clinical diagnostic applications due to insufficient sensitivity. In this regard, here we introduce an ultrasensitive and robust signal processing strategy for PS biosensors that relies on the calculation of the average value over wavelength of spectral interferograms, namely IAW, obtained on PS interferometer by subtraction (wavelength by wavelength) of reflection spectra acquired after adsorption of biomolecules inside the nanopores from a reference reflection spectrum recorded in acetate buffer. As a case study, we choose to monitor bovine serum albumin (BSA) unspecific adsorption, which has been often employed in the literature as a model for proof-of-concept studies of perspective biosensing applications. The proposed IAW signal processing strategy enables reliable detection of BSA at concentrations in the range from 150 pM to 15 μM (down to 3 orders of magnitude lower than those targeted in the current literature) using a PS interferometer operating in label-free mode without any amplification strategies, with good sample-to-sample reproducibility over the whole range of tested concentrations (%CV = 16% over 5 replicates) and good signal-to-noise ratio also at the lowest tested concentration (S/N ≈ 4.6 at 150 pM). A detection limit (DL) of 20 pM (20 femtomoles, 1 mL) is estimated from the sigmoidal function best fitting (R(2) = 0.989) IAW experimental data over the whole range of tested concentrations. This is the lowest DL that has been reported in the literature since the seminal paper of Sailor and co-workers (1997) on the use of PS interferometer for biosensing, and lowers of 4 orders of magnitude DL attained with label-free PS interferometers using conventional effective optical thickness (EOT) calculation through reflective interferometric Fourier transform spectroscopy. Accordingly, the IAW signal processing strategy envisage bringing PS optical transduction at the forefront of ultrasensitive label-free biosensing techniques, especially for point-of-care clinical analysis where low analyte concentrations have to be detected in a small amount of biological samples.

N-rich porous organic polymer with suitable donor–donor–acceptor functionality for the sensing of nucleic acid bases and CO2storage application

A new porous polymer has been synthesizedviaradical polymerization of divinylbenzene and (+)-N,N₀-diallyltartardiamide under solvothermal conditions. It showed selective biosensing of cytosine and high CO₂uptake.

Piezomicrogravimetric and impedimetric oligonucleotide biosensors using conducting polymers of biotinylated bis(2,2'-bithien-5-yl)methane as recognition units

A new conducting polymer of biotinylated bis(2,2'-bithien-5-yl)methane was prepared and applied as the recognition unit of two different biosensors for selective oligonucleotide determination using either electrochemical impedance spectroscopy (EIS) or piezoelectric microgravimetry (PM) for label-free analytical signal transduction. For preparation of this unit, first, a biotinylated bis(2,2'-bithien-5-yl)methane functional monomer was designed and synthesized. Then, this monomer was potentiodynamically polymerized to form films on the surface of a glassy carbon electrode (GCE) and a Au electrode of a quartz crystal resonator (QCR) for the EIS and PM transduction, respectively. On top of these films, neutravidin was irreversibly immobilized by complexing the biotin moieties of the polymer. Finally, recognizing biotinylated oligonucleotide was attached by complexing the surface-immobilized neutravidin. This layer-by-layer assembling of the poly(thiophene-biotin)-neutravidin-(biotin-oligonucleotide) recognition film served to determine the target oligonucleotide via complementary nucleobase pairing. Under optimized determination conditions, the target oligonucleotide limit of detection (LOD) was 0.5 pM and 50 nM for the EIS and PM transduction, respectively. The sensor response to the target oligonucleotide was linear with respect to logarithm of the target oligonucleotide concentration in a wide range of 0.5 pM to 30 μM and with respect to its concentration in the range of 50 to 600 nM for the EIS and PM transduction, respectively. The biosensors were appreciably selective with respect to the nucleobase mismatched oligonucleotides.