8(meso)-Pyridyl-BODIPYs: Effects of 2,6-Substitution with Electron-Withdrawing Nitro, Chloro, and Methoxycarbonyl Groups

The introduction of electron-withdrawing groups on 8(meso)-pyridyl-BODIPYs tends to increase the fluorescence quantum yields of this type of compound due to the decrease in electronic charge density on the BODIPY core. A new series of 8(meso)-pyridyl-BODIPYs bearing a 2-, 3-, or 4-pyridyl group was synthesized and functionalized with nitro and chlorine groups at the 2,6-positions. The 2,6-methoxycarbonyl-8-pyridyl-BODIPYs analogs were also synthesized by condensation of 2,4-dimethyl-3-methoxycarbonyl-pyrrole with 2-, 3-, or 4-formylpyridine followed by oxidation and boron complexation. The structures and spectroscopic properties of the new series of 8(meso)-pyridyl-BODIPYs were investigated both experimentally and computationally. The BODIPYs bearing 2,6-methoxycarbonyl groups showed enhanced relative fluorescence quantum yields in polar organic solvents due to their electron-withdrawing effect. However, the introduction of a single nitro group significantly quenched the fluorescence of the BODIPYs and caused hypsochromic shifts in the absorption and emission bands. The introduction of a chloro substituent partially restored the fluorescence of the mono-nitro-BODIPYs and induced significant bathochromic shifts.

Diiodo-BODIPY Sensitizing of the [Mo3S13]2- Cluster for Noble-Metal-Free Visible-Light-Driven Hydrogen Evolution within a Polyampholytic Matrix

We report on a photocatalytic setup that utilizes the organic photosensitizer (PS) diiodo-BODIPY and the non-precious-metal-based hydrogen evolution reaction (HER) catalyst (NH₄)₂[Mo₃S₁₃] together with a polyampholytic unimolecular matrix poly(dehydroalanine)-graft-poly(ethylene glycol) (PDha-g-PEG) in aqueous media. The system shows exceptionally high performance with turnover numbers (TON > 7300) and turnover frequencies (TOF > 450 h^-1) that are typical for noble-metal-containing systems. Excited-state absorption spectra reveal the formation of a long-lived triplet state of the PS in both aqueous and organic media. The system is a blueprint for developing noble-metal-free HER in water. Component optimization, e.g., by modification of the meso substituent of the PS and the composition of the HER catalyst, is further possible.

A Comparison of the Photophysical, Electrochemical and Cytotoxic Properties of meso-(2-, 3- and 4-Pyridyl)-BODIPYs and Their Derivatives

Boron dipyrromethene (BODIPY) dyes bearing a pyridyl moiety have been used as metal ion sensors, pH sensors, fluorescence probes, and as sensitizers for phototherapy. A comparative study of the properties of the three structural isomers of meso-pyridyl-BODIPYs, their 2,6-dichloro derivatives, and their corresponding methylated cationic pyridinium-BODIPYs was conducted using spectroscopic and electrochemical methods, X-ray analyses, and TD-DFT calculations. Among the neutral derivatives, the 3Py and 4Py isomers showed the highest relative fluorescence quantum yields in organic solvents, which were further enhanced 2-4-fold via the introduction of two chlorines at the 2,6-positions. Among the cationic derivatives, the 2catPy showed the highest relative fluorescence quantum yield in organic solvents, which was further enhanced by the use of a bulky counter anion (PF₆^-). In water, the quantum yields were greatly reduced for all three isomers but were shown to be enhanced upon introduction of 2,6-dichloro groups. Our results indicate that 2,6-dichloro-meso-(2- and 3-pyridinium)-BODIPYs are the most promising for sensing applications. Furthermore, all pyridinium BODIPYs are highly water-soluble and display low cytotoxicity towards human HEp2 cells.

O-BODIPYs as fluorescent labels for sugars: glucose, xylose and ribose

Fluorescent 1 : 1, 1 : 2 and 1 : 3 sugar-O-BODIPY conjugates of glucose, xylose and ribose were characterised by 1H–11B HMBC and 11B NMR to discriminate between boron bound to 1,2-, 1,3- or 1,4-diol sites and furanose/pyranose sugar forms.

Dirhodium-Based Supramolecular Framework Catalyst for Visible-Light-Driven Hydrogen Evolution

The direct conversion of solar energy to clean fuels as alternatives to fossil fuels is an important approach for addressing the global energy shortage and environmental problems. Here, we introduce a new dirhodium-complex-based framework assembly as a heterogeneous molecule-based photocatalyst for hydrogen evolution using visible light. Two dirhodium complexes bearing visible-light-harvesting BODIPY (boron dipyrromethene, BDP) moieties were newly designed and synthesized. The obtained complexes were self-assembled to framework structures (supramolecular framework catalysts), which are stabilized intermolecular noncovalent interactions. These frameworks retained excellent visible-light-harvesting properties of BDP moieties. Investigation of the catalytic performance of the supramolecular framework catalysts revealed that the supramolecular framework catalyst with heavy atoms at BDP moieties exhibited excellent performance in the formation of hydrogen with a reaction rate of 275.8 μmol g^-1 h^-1 under irradiation of visible light, whereas the supramolecular framework catalyst without heavy atoms at BDP moieties was inactive. Moreover, the system has the additional benefits of high durability (up to 96 h), reusability, and facile removal from the reaction mixture. We also disclosed the effect of heavy atoms at BDP moieties on the catalytic activity and proposed a reaction mechanism.

Design of BODIPY dyes as triplet photosensitizers: electronic properties tailored for solar energy conversion, photoredox catalysis and photodynamic therapy

BODIPYs are renowned fluorescent dyes with strong and tunable absorption in the visible region, high thermal and photo-stability and exceptional fluorescence quantum yields. Transition metal complexes are the most commonly used triplet photosensitisers, but, recently, the use of organic dyes has emerged as a viable and more sustainable alternative. By proper design, BODIPY dyes have been turned from highly fluorescent labels into efficient triplet photosensitizers with strong absorption in the visible region (from green to orange). In this perspective, we report three design strategies: (i) halogenation of the dye skeleton, (ii) donor-acceptor dyads and (iii) BODIPY dimers. We compare pros and cons of these approaches in terms of optical and electrochemical properties and synthetic viability. The potential applications of these systems span from energy conversion to medicine and key examples are presented.

Synthetic Organic Design for Solar Fuel Systems

From the understanding of biological processes and metalloenzymes to the development of inorganic catalysts, electro- and photocatalytic systems for fuel generation have evolved considerably during the last decades. Recently, organic and hybrid organic systems have emerged to challenge the classical inorganic structures through their enormous chemical diversity and modularity that led earlier to their success in organic (opto)electronics. This Minireview describes recent advances in the design of synthetic organic architectures and promising strategies toward (solar) fuel synthesis, highlighting progress on materials from organic ligands and chromophores to conjugated polymers and covalent organic frameworks.

Synthesis of a B12-BODIPY dyad for B12-inspired photochemical transformations of a trichloromethylated organic compound

A B₁₂ complex-BODIPY dyad was synthesized by peripheral modification of cobalamin derivatives. The photophysical properties of the dyad were investigated by UV-vis, PL, and transient absorption spectroscopy. A visible light-driven dechlorination reaction of a trichlorinated organic compound, DDT, was reported. The dyad showed efficient catalysis for dechlorination under N₂ with turnover numbers of over 220 for the reaction. One-pot syntheses of an ester and amide from DDT and benzotrichloride were also achieved using the dyad under air.

The odyssey of cobaloximes for catalytic H2 production and their recent revival with enzyme-inspired design

Cobaloxime complexes gained attention for their intrinsic ability of catalytic H₂ production despite their initial emergence as a vitamin B12 model. The simple, robust, and synthetically manoeuvrable cobaloxime core represents a model catalyst molecule for the investigation of optimal conditions for both photo- and electrocatalytic H₂ production catalytic assemblies. Cobaloxime is one of the rare catalysts that finds equal applications in the analysis of homogeneous and heterogeneous catalytic conditions. However, the poor aqueous solubility and long-term instability of cobaloximes have severely impeded their growth. Lately, interest in the cobaloxime-based catalysts has been resuscitated with the rational use of extended enzymatic features. This unique enzyme-inspired catalyst design strategy has instigated the formation of a new genre of cobaloxime molecules that exhibit enhanced photo- and electrocatalytic H₂ evolution with improved aqueous and air stability.

Multi-state amine sensing by electron transfers in a BODIPY probe

Photoinduced electron transfer sets up the BODIPY probe for multi-state amine sensing by single-electron transfer then collisional quenching.

Development of a "Turn-on" Fluorescent Probe-Based Sensing System for Hydrogen Sulfide in Liquid and Gas Phase

A “turn-on” fluorescence sensing system based on a BODIPY-cobaloxime complex for the detection of H₂S in liquid and gas phase was developed. To that aim, two cobaloxime complexes bearing an axial pyridyl-BODIPY ligand were initially evaluated as sensitive fluorescent HS⁻ indicators in aqueous solution. The sensing mechanism involves the selective substitution of the BODIPY ligand by the HS⁻ anion at the cobalt center, which is accompanied by a strong fluorescence enhancement. The selection of a complex with an ideal stability and reactivity profile toward HS⁻ relied on the optimal interaction between the cobalt metal-center and two different pyridyl BODIPY ligands. Loading the best performing BODIPY-cobaloxime complex onto a polymeric hydrogel membrane allowed us to study the selectivity of the probe for HS⁻ against different anions and cysteine. Successful detection of H₂S by the fluorescent “light-up” membrane was not only accomplished for surface water but could also be demonstrated for relevant H₂S concentrations in gas phase.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Tethered sensitizer-catalyst noble-metal-free molecular devices for solar-driven hydrogen generation

Inspired by natural photosynthesis in an organized assembly, compact H2-evolving molecular devices, which tether sensitizer and catalyst modules in one single molecule, present an opportunity to overcome the diffusion limit required for multi-component molecular systems, and increase intramolecular electron transfer rates from the photoactivated unit to the catalytic center to improve H2-evolving efficiency. Thereinto absolutely noble-metal free H2-evolving molecular devices are of particular interest because they don't contain precious and scarce noble-metal based components. This Frontier article focuses specifically on the recent advances in the design, synthesis, and photocatalytic properties of all-abundant-element molecular devices for photoinduced H2 generation via intramolecular processes. Some challenges and suggestions for future directions in this field are also illustrated.

Photo-Induced Charge Separation vs. Degradation of a BODIPY-Based Photosensitizer Assessed by TDDFT and RASPT2

A meso-mesityl-2,6-iodine substituted boron dipyrromethene (BODIPY) dye is investigated using a suite of computational methods addressing its functionality as photosensitizer, i.e., in the scope of light-driven hydrogen evolution in a two-component approach. Earlier reports on the performance of the present iodinated BODIPY dye proposed a significantly improved catalytic turn-over compared to its unsubstituted parent compound based on the population of long-lived charge-separated triplet states, accessible due to an enhanced spin-orbit coupling (SOC) introduced by the iodine atoms. The present quantum chemical study aims at elucidating the mechanisms of both the higher catalytic performance and the degradation pathways. Time-dependent density functional theory (TDDFT) and multi-state restricted active space perturbation theory through second-order (MS-RASPT2) simulations allowed identifying excited-state channels correlated to iodine dissociation. No evidence for an improved catalytic activity via enhanced SOCs among the low-lying states could be determined. However, the computational analysis reveals that the activation of the dye proceeds via pathways of the (prior chemically) singly-reduced species, featuring a pronounced stabilization of charge-separated species, while low barriers for carbon-iodine bond breaking determine the photostability of the BODIPY dye.

Detoxification of a Sulfur Mustard Simulant Using a BODIPY-Functionalized Zirconium-Based Metal-Organic Framework

Effective detoxification of chemical warfare agents is a global necessity. As a powerful photosensitizer, a halogenated BODIPY ligand is postsynthetically appended to the Zr₆ nodes of the metal-organic framework (MOF), NU-1000, to enhance singlet oxygen generation from the MOF. The BODIPY/MOF material is then used as a heterogeneous photocatalyst to produce singlet oxygen under green LED irradiation. The singlet oxygen selectively detoxifies the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), to the less toxic sulfoxide derivative (2-chloroethyl ethyl sulfoxide, CEESO) with a half-life of approximately 2 min.

Photocatalytic water reduction from a noble-metal-free molecular dyad based on a thienyl-expanded BODIPY photosensitizer

A noble-metal-free molecular dyad was constructed by anchoring a thienyl-expanded BODIPY photosensitizer (PS) to a cobaloxime catalyst, which gives a 2.5-fold increase in the TON, and a 3-fold enhancement in the quantum efficiency as compared to the multicomponent catalytic system for the generation of hydrogen via the reduction of water. The stability of PS was expected to improve by introducing the thienyl moiety into the BODIPY core.

The relationship between the boron dipyrromethene (BODIPY) structure and the effectiveness of homogeneous and heterogeneous solar hydrogen-generating systems as well as DSSCs

BODIPY photosensitizers were used to investigate the relationship between structure and effectiveness of visible-light-driven hydrogen production as well as DSSCs.

Structural and electronic characterization of multi-electron reduced naphthalene (BIAN) cobaloximes

Synthesis, spectroscopy and DFT studies on cobian-oximes provide insight to multi-electron processes in electrocatalytic processes.