Productizing Nano-Bioactive Glass-Based Bilayer Scaffolds: A Graft for Reconstruction of Mandibular and Femoral Bone Defects

This investigation aimed to construct a bilayer scaffold integrating alginate and gelatin with nanobioactive glass (BG), recognized for their efficacy in tissue regeneration and drug delivery. Scaffolds, namely, alginate/gelatin (AG), alginate-/actonel gelatin (AGD), alginate actenol/gelatin-45S5 BG (4AGD), and alginate-actonel/gelatin-59S BG (5AGD), were assembled using a cost-effective freeze-drying method, followed by detailed structural investigation via powder X-ray diffraction as well as morphological characterization using field emission scanning electron microscopy (FESEM). FESEM revealed a honeycomb-like morphology with distinct pore sizes for nutrient, oxygen, and drug transport. The scaffolds evidently exhibited hemocompatibility, high porosity, good swelling capacity, and biodegradability. In vitro studies demonstrated sustained drug release, particularly for scaffolds containing actonel. In vivo tests showed that the bilayer scaffold promoted new bone formation, surpassing the control group in bone area increase. The interaction of the scaffold with collagen and released ions improved the osteoblastic function and bone volume fraction. The findings suggest that this bilayer scaffold could be beneficial for treating critical-sized bone defects, especially in the mandibular and femoral regions.

Alginate based biomaterials for hemostatic applications: Innovations and developments

Development of the efficient hemostatic materials is an essential requirement for the management of hemorrhage caused by the emergency situations to avert most of the casualties. Such injuries require the use of external hemostats to facilitate the immediate blood clotting. A variety of commercially available hemostats are present in the market but most of them are associated with limitations such as exothermic reactions, low biocompatibility, and painful removal. Thus, fabrication of an ideal hemostatic composition for rapid blood clot formation, biocompatibility, and antimicrobial nature presents a real challenge to the bioengineers. Benefiting from their tunable fabrication properties, alginate-based hemostats are gaining importance due to their excellent biocompatibility, with >85 % cell viability, high absorption capacity exceeding 500 %, and cost-effectiveness. Furthermore, studies have estimated that wounds treated with sodium alginate exhibited a blood loss of 0.40 ± 0.05 mL, compared to the control group with 1.15 ± 0.13 mL, indicating its inherent hemostatic activity. This serves as a solid foundation for designing future hemostatic materials. Nevertheless, various combinations have been explored to further enhance the hemostatic potential of sodium alginate. In this review, we have discussed the possible role of alginate based composite hemostats incorporated with different hemostatic agents, such as inorganic materials, polymers, biological agents, herbal agents, and synthetic drugs. This article outlines the challenges which need to be addressed before the clinical trials and give an overview of the future research directions.

Crucial Chemical Revelations in 45S5 Bioactive Glass via Sequential Precursor Integration Order

Among the wet chemical nanoparticle fabrication techniques, the sol-gel process happens through hydrolysis and subsequent polycondensation reactions. The bioactive glass known as the 45S5 SiO2-Na2O-CaO-P2O5 quaternary system has intricate chemistry, yet its advantages benefit the biomedical field on an enormous scale. The order in which the ethanol and TEOS inclusions are exchanged was investigated in this work because it has a direct impact on the early hydrolysis process. Another strategy involves adding phosphate species to the sol before gelation, modifying the network chemistry, and interpreting the findings. Adding phosphate species before gelation in the biomaterial (E-Si-P) resulted in the formation of hydroxyapatite and other calcium silicate phases at 800 °C. Swapping ethanol and TEOS biomaterials (E-Si and Si-E) resulted in the sodium-calcium silicate phase only. Si-E with strong Si-O-Si siloxane rings demonstrated superior mechanical stability, hemocompatibility, and bioactivity. This compact Si-O-Si decreased the surface area of Si-E. XPS spectra revealed that E-Si-P has the lowest Na 1s binding energy (BE) and the highest BE for Si 2p. More Si-O-/Si-OH groups formed by E-Si make the network weak and decrease the surface area and protein adsorption. These differences significantly influenced the morphology, surface properties, mechanical studies, and compatibility test. This study has further unraveled the protocol to design a biomaterial with mechanical stability and load-bearing ability. In addition, the appropriate protocol to yield the desired property-rich biomaterial with preserved bioactivity, mechanical stability, cytocompatibility, as well and surface porosity has been elaborated in detail.

Multi-functional bandage - bioactive glass/metal oxides/alginate composites based regenerative membrane facilitating re-epithelialization in diabetic wounds with sustained drug delivery and anti-bactericidal efficacy

Chronic wounds, especially diabetic, foot and pressure ulcers are a major health problem affecting >10 % of the world's populace. Calcium phosphate materials, particularly, bioactive glasses (BG), used as a potential material for hard and soft tissue repair. This study combines nanostructured 45S5 BG with titania (TiO2) and alumina (Al2O3) into a composite via simple sol-gel method. Prepared composites with alginate (Alg) formed a bioactive nanocomposite hydrogel membrane via freezing method. X-ray diffraction revealed formation of two phases such as Na1.8Ca1.1Si6O14 and β-Na2Ca4(PO4)2SiO4 in the silica network. Fourier transformed InfraRed spectroscopy confirmed the network formation and cross-linking between composite and alginate. <2 % hemolysis, optimal in vitro degradation and porosity was systematically evaluated up to 7 days, resulting in increasing membrane bioactivity. Significant cytocompatibility, cell migration and proliferation and a 3-4-fold increase in Collagen (Col) and Vascular Endothelial Growth Factor (VEGF) expression were obtained. Sustained delivery of 80 % Dox in 24 h and effective growth reduction of S. aureus and destruction of biofilm development against E. coli and S. aureus within 24 h. Anatomical fin regeneration, rapid re-epithelialization and wound closure were achieved within 14 days in both zebrafish and in streptozotocin (STZ) induced rat in vivo animal models with optimal blood glucose levels. Hence, the fabricated bioactive membrane can act as effective wound dressing material, for diabetic chronic infectious wounds.

Devitrite (Na2Ca3Si6O16) phase dominated nanostructured 45S5 bioactive glass: exploring its structural and biological properties

This research study is primarily centred around calcination temperature and time influence on phase formation in bioactive glasses (BGs). In the present study, BG with a nominal composition of 45S5 was synthesized through the sol-gel process. The developed BGs then underwent heat treatment for various sintering durations and temperatures. X-ray diffraction (XRD) patterns of the BGs reveals that the sintering process led to the crystallization of both devitrite (Na2Ca3Si6O16) and combeite (Na2Ca2Si3O9) phases. The field emission scanning electron microscopy study divulges morphological alterations, from sheet-like to rod-like structures to eventually transforming into spherical and sheet-like structures. The surface area and Type-IV mesoporous porosity were validated through Brunauer Emmett Teller analysis, highlighting a notable increase in pore volume and mechanical strength at a lower sintering temperature.In vitroapatite formation was carried out in Hank's balance salt in order to evaluate the bioactivity of the glass. After 7 d of immersion in simulated body fluid (SBF), XRD patterns and scanning electron microscopy micrographs results showed that formation of hydroxyapatite layer on the surface of the BGs. The BG compatibility with erythrocytes (red blood cells) was also studied, and the results revealed that there was only a low 2% lysis, showing good hemocompatibility. The drug loading and release behaviour of the BGs was studied in thein vitroanalysis. The findings showed a high drug encapsulation effectiveness of up to 90% and continuous drug release from the BGs for 24 h. The materials biocompatibility was unambiguously confirmed by cytocompatibility and proliferation studies. This study provides compelling evidence for the exceptional efficacy and promise of the distinct 45S5 BGs in advancing the field of regenerative medicine.

Modulation of 3D Bioprintability in Polysaccharide Bioink by Bioglass Nanoparticles and Multiple Metal Ions for Tissue Engineering

BACKGROUND

Bioglasses are used in applications related to bone rehabilitation and repair. The mechanical and bioactive properties of polysaccharides like alginate and agarose can be modulated or improved using bioglass nanoparticles. Further essential metal ions used as crosslinker have the potential to supplement cultured cells for better growth and proliferation.

METHOD

In this study, the alginate bioink is modulated for fabrication of tissue engineering scaffolds by extrusion-based 3D bioprinting using agarose, bioglass nanoparticles and combination of essential trace elements such as iron, zinc, and copper. Homogeneous bioink was obtained by in situ mixing and bioprinting of its components with twin screw extruder (TSE) based 3D bioprinting, and then distribution of metal ions was induced through post-printing diffusion of metal ions in the printed scaffolds. The mechanical and 3d bioprinting properties, microscopic structure, biocompatibility of the crosslinked alginate/agarose hydrogels were analyzed for different concentrations of bioglass. The adipose derived mesenchymal stem cells (ADMSC) and osteoblast cells (MC3T3) were used to evaluate this hydrogel's biological performances.

RESULTS

The porosity of hydrogels significantly improves with the incorporation of the bioglass. More bioglass concentration results in improved mechanical (compressive, dynamic, and cyclic) and 3D bioprinting properties. Cell growth and extracellular matrix are also enhanced with bioglass concentration.

CONCLUSION

For bioprinting of the bioinks, the advanced TSE head was attached to 3D bioprinter and in situ fabrication of cell encapsulated scaffold was obtained with optimized composition considering minimal effects on cell damage. Fabricated bioinks demonstrate a biocompatible and noncytotoxic scaffold for culturing MC3T3 and ADMSC, while bioglass controls the cellular behaviors such as cell growth and extracellular matrix formation.

Bilayer wound dressing composed of asymmetric polycaprolactone membrane and chitosan-carrageenan hydrogel incorporating storax balsam

A comprehensive approach is needed to develop multifunctional wound dressing that is simple yet efficient. In this work, Liquidambar orientalis Mill. storax loaded hydroxyethyl chitosan (HECS)-carrageenan (kC) based hydrogel (HECS-kC) and polydopamine coated asymmetric polycaprolactone membrane (PCL-DOP) were used to develop a multifunctional and modular bilayer wound dressing. Asymmetric PCL-DOP membrane was prepared by non-solvent induced phase separation (NIPS) followed by polydopamine coating and demonstrated an excellent barrier against bacteria while allowing permeability for 5.45 ppm dissolved‑oxygen and 2130 g/m2 water vapor transmission in 24 h in addition to 805 kPa tensile strength. Storax loaded HECS-kC hydrogel, on the other hand, demonstrated a pH-responsive degradation and swelling to provide necessary conditions to facilitate wound healing. The hydrogels showed stretchability above 140 %, mild adhesive strength on sheep skin and PCL-DOP membrane, while the storax incorporation enhanced antibacterial and antioxidant activity. Furthermore, rat full-thickness skin defect model showed that the developed bilayer wound dressing could significantly facilitate wound healing compared to Tegaderm™ and control groups. This study shows that the bilayered wound dressing has the potential to be used as a simple and effective wound care system.

Chitosan bioactive glass scaffolds for in vivo subcutaneous implantation, toxicity assessment, and diabetic wound healing upon animal model

This study aims to develop chitosan-bioactive glass (BG) scaffolds for diabetic wound healing, toxicity valuation, and subcutaneous implantation in animals for biocompatibility assessment. The scaffolds were prepared by lyophilization technique. In specific BG without sodium (Na), composited with chitosan for better biological activities. The equipped scaffolds were studied for their physiochemical, biological, in vitro and in vivo performances. The chitosan and chitosan-BG (Na free) scaffolds show reliable biocompatibility, cytocompatibility, anti-oxidant, and tissue regeneration. The biocompatibility, toxicity assessments, and diabetic skin wound healing experiments were examined through in vivo studies using Sprague Dawley rats. The extracted tissue samples were analyzed using hematoxylin-eosin- (H and E) and Masson's trichrome staining. Further, tissue excised after scaffold implantation declared non-toxic, non-allergic, and anti-inflammatory nature of chitosan scaffolds. Moreover, the total ribonucleic acid (RNA) expression levels were measured using reverse transcription-polymerase chain reaction (RT-PCR) for the scaffolds against vascular endothelial growth factor (VEGF), and collagen type one (Col-1) primers. Admirably, the scaffolds achieved the best level of skin wound healing via tissue regeneration by increasing epithetical cell formation and collagen deposition. Thus, the biocompatibility, non-toxicity, anti-inflammatory, and wound healing efficiency proved that the chitosan-BG (Na free) scaffold can be readily substantial for wound healing.

Casein-assisted exfoliation of tungsten disulfide nanosheets for biomedical applications

Our regular life can be more challenging by bone abnormalities. Bone tissue engineering is used for repairing, regenerating, or replacing bone tissue that has been injured or infected. It is effective in overcoming the drawbacks of conventional bone grafting methods like autograft and allograft by enhancing the effectiveness of bone regeneration. Recent discoveries have shown that the exfoliation of transition metal dichalcogenides (TMDs) with protein is in great demand for bone tissue engineering applications. WS2 nanosheets were developed using casein and subsequently characterized with different analytical techniques. Strong absorption peaks were observed in the UV-visible spectra at 520 nm and 630 nm. Alginate and alginate-casein WS2 microspheres were developed. Stereomicroscopic images of the microspheres are spherical in shape and have an average diameter of around 0.8 ± 0.2 mm. The alginate-casein WS2 microspheres show higher content of water absorption and retention properties than only alginate-containing microspheres. The apatite formation in the simulated bodily fluid solution was facilitated more effectively by the alginate-casein-WS2 microspheres. Additionally, alginate-casein-WS2 microspheres have a compressive strength is 58.01 ± 4 MPa. Finally, in vitro cell interaction studies reveals that both the microspheres are biocompatible with the C3H10T1/2 cells, and alginate-casein-WS2-based microspheres promote cell growth more significantly. Alginate-casein-WS2 microspheres promote alkaline phosphatase activity, and mineralization process. Additionally, alginate-casein-WS2-based microspheres exponentially enhance the genes for ALP, BMP-2, OCN, and Collage type-1. The produced alginate-casein-WS2 microspheres could be a suitable synthetic graft for a bone transplant replacement.

Unveiling pro-angiogenesis and drug delivery using dual-bio polymer with bio-ceramic based nanocomposite hydrogels

In regenerative medicine, blood vessel development is of utmost importance as it enables the restoration of blood flow to tissues, and facilitate rapid vascularization in clinical tissue-engineered grafts. Herein, we fabricate the nanocomposite hydrogels from BG (clinophosinaite), alginate, Polyethylene glycol (PEG) and Dexamethasone (DEX) for the dual applications of drug delivery and angiogenesis assay. The hydrogels were fabricated through cross-linking approach and termed as alginate/PEG (A), alginate/PEG/clinophosinaite (AC), and alginate/PEG/clinophosinaite/DEX (ACD) that further subjected to structural characterization, using powder X-ray diffraction, and fourier-transform infrared spectroscopy. Porous nanostructures and sheets were imaged using field emission scanning electron microscopy (FESEM), which aid in nutrient and oxygen transport to support angiogenesis. The nanocomposite hydrogels evidently demonstrated good hemocompatibility and fully hydrophilic (30.20°). By means of liquid displacement technique, the nanocomposite hydrogel achieves 47% of porosity with the compressive strength about 0.04 MPa. In alginate/PEG/clinophosinaite and alginate/PEG/clinophosinaite/DEX systems, water absorption capacity reached 85% in 6 h and maintained 90% retention after 12 h. Further, leachable tests revealed that the hydrogel had not deformed even after 24 h. In vitro drug release studies evidently divulge sustainable delivery of DEX from alginate/PEG/clinophosinaite/DEX hydrogel with superior characteristics for drug release. The angiogenesis assay also evidently revealed that the AC and ACD hydrogels, demonstrated higher angiogenic properties with, promoted blood vessel development.

3D interconnected porous PMMA scaffold integrating with advanced nanostructured CaP-based biomaterials for rapid bone repair and regeneration

Bioactive scaffolds with polymer and nanostructured bioactive glass-based composites are promising materials for regenerative applications in consequence of close mimics of natural bone composition. Poly methyl methacrylate (PMMA) is a highly preferred thermoplastic polymer for orthopedic applications as it has good biocompatibility. Different kinds of bioactive, biodegradable as well as biocompatible biomaterial composites such as Bioglass (BG), Hydroxyapatite (Hap), and Tricalcium phosphate (TCP) can be integrated with PMMA, so as to augment the bioactivity, porosity as well as regeneration of hard tissues in human body. Among the bioactive glass, 60S BG (Bioactive glass with 60 percentage of Silica without Sodium ions) is better materials among aforementioned systems owning to mechanical stability as well as controlled bioactive material. In this work, the fabrication of PMMA-CaP (calcium phosphate)-based scaffolds were carried out by Thermal Induced Phase Separation method (TIPS). X-ray diffractogram analysis (XRD) is used to examine the physiochemical properties of the scaffolds that evidently reveal the presence of calcium phosphate besides calcium phosphate silicate phases. The Field Emission Scanning Electron Microscopy (FESEM) studies obviously exhibited the microstructure of the scaffolds as well as their interconnected porous morphology. The PMMA/60S BG/TCP (C50) scaffold has the maximum pore size, measuring 77 ± 23 μm, while the average pore size ranges from 50 ± 20 to 80 ± 23 μm. By performing a liquid displacement method, the C50 scaffold is found to have the largest porosity of 50%, high hydrophilicity of 118.16°, and a compression test reveals the scaffolds to have a maximum compressive strength of 0.16 MPa. The emergence of bone-like apatite on the scaffold surface after 1st and 21st days of SBF immersion is further supported by in vitro bioactivity studies. Cytocompatibility and hemocompatibility analyses undoubtedly confirmed the biocompatibility behavior of PMMA-based bioactive scaffolds. Nano-CT investigation demonstrates that PMMA-CaP scaffolds provide more or less alike morphologies of composites that resemble the natural bone. Therefore, this combination of scaffolds could be considered as potential biomaterials for bone regeneration application. This detailed study promisingly demonstrates the eminence of the unique scaffolds in the direction of regenerative medicines.

Kaempferol-loaded bioactive glass-based scaffold for bone tissue engineering: in vitro and in vivo evaluation

Due to the increasing prevalence of bone disorders among people especially in average age, the future of treatments for osseous abnormalities has been illuminated by scaffold-based bone tissue engineering. In this study, in vitro and in vivo properties of 58S bioactive glass-based scaffolds for bone tissue engineering (bare (B.SC), Zein-coated (C.SC), and Zein-coated containing Kaempferol (KC.SC)) were evaluated. This is a follow-up study on our previously published paper, where we synthesized 58S bioactive glass-based scaffolds coated with Kaempferol-loaded Zein biopolymer, and characterized from mostly engineering points of view to find the optimum composition. For this aim, in vitro assessments were done to evaluate the osteogenic capacity and biological features of the scaffolds. In the in vivo section, all types of scaffolds with/without bone marrow-derived stem cells (BMSC) were implanted into rat calvaria bone defects, and potential of bone healing was assessed using imaging, staining, and histomorphometric analyses. It was shown that, Zein-coating covered surface cracks leading to better mechanical properties without negative effect on bioactivity and cell attachment. Also, BMSC differentiation proved that the presence of Kaempferol caused higher calcium deposition, increased alkaline phosphatase activity, bone-specific gene upregulation in vitro. Further, in vivo study confirmed positive effect of BMSC-loaded KC.SC on significant new bone formation resulting in complete bone regeneration. Combining physical properties of coated scaffolds with the osteogenic effect of Kaempferol and BMSCs could represent a new strategy for bone regeneration and provide a more effective approach to repairing critical-sized bone defects.

3D hydrogel/ bioactive glass scaffolds in bone tissue engineering: Status and future opportunities

Repairing significant bone defects remains a critical challenge, raising the clinical demand to design novel bone biomaterials that incorporate osteogenic and angiogenic properties to support the regeneration of vascularized bone. Bioactive glass scaffolds can stimulate angiogenesis and osteogenesis. In addition, natural or synthetic polymers exhibit structural similarity with extracellular matrix (ECM) components and have superior biocompatibility and biodegradability. Thus, there is a need to prepare composite scaffolds of hydrogels for vascularized bone, which incorporate to improve the mechanical properties and bioactivity of natural polymers. In addition, those composites' 3-dimensional (3D) form offer regenerative benefits such as direct doping of the scaffold with ions. This review presents a comprehensive discussion of composite scaffolds incorporated with BaG, focusing on their effects on osteo-inductivity and angiogenic properties. Moreover, the adaptation of the ion-doped hydrogel composite scaffold into a 3D scaffold for the generation of vascularized bone tissue is exposed. Finally, we highlight the challenges and future of manufacturing such biomaterials.

Bioactive nanoglass regulating the myogenic differentiation and skeletal muscle regeneration

Bioactive glass nanoparticles (BGNs) are widely used in the field of biomedicine, including drug delivery, gene therapy, tumor therapy, bioimaging, molecular markers and tissue engineering. Researchers are interested in using BGNs in bone, heart and skin regeneration. However, there is inadequate information on skeletal muscle tissue engineering, limited information on the biological effects of BGNs on myoblasts, and the role of bioactive glass composite materials on myogenic differentiation is unknown. Herein, we report the effects of BGNs with different compositions (60Si-BGN, 80Si-BGN, 100Si-BGN) on the myogenic differentiation in C2C12 cells and in vivo skeletal tissue regeneration. The results showed that 80Si-BGN could efficiently promote the myogenic differentiation of C1C12 cells, including the myotube formation and myogenic gene expression. The in vivo experiment in a rat skeletal muscle defect model also confirmed that 80Si-BGN could significantly improve the complete regeneration of skeletal muscle tissue during 4 weeks implantation. This work firstly demonstrated evidence that BGN could be the bioactive material in enhancing skeletal muscle regeneration.

Bioceramic and polycationic biopolymer nanocomposite scaffolds for improved wound self-healing and anti-inflammatory properties: an in vitro study

The development of wound healing scaffolds with high porosity, rapid healing properties, and anti-inflammatory functionality is vital in the chronic wound healing stage for the production of extracellular matrices of injured tissues. The 45S5 bioactive glass (BG) possesses good biocompatibility and provides a potential bonding resource for fibroblast cell proliferation, growth factor synthesis, and granulated tissue formation. Chitosan, a natural polymer, promotes tissue regeneration and has anti-microbial properties. BG and chitosan scaffolds were prepared by the freeze-drying (lyophilization) method. The chitosan scaffold is a semi-crystalline polymer with a random crystal structure because it contains more hydroxyl groups. Chitosan alone shows a sheet-like morphology with a porous microstructure (1.7475 nm). BG particulates were well decorated over the surface of the chitosan scaffold with a homogeneous dispersion. Cell viability was observed for L929 cells on the chitosan-BG scaffolds. Confocal images vividly depict the interaction of the L929 cells with the scaffold without causing any damage to the cell membrane. In vitro scratch assay shows the best wound healing activity (complete wound closure) for the BG-chitosan nanocomposite scaffolds at 18 h. The chitosan-BG scaffolds were combined with anti-inflammatory drugs and induced inflammatory genes at an inhibition rate of COX of (36, 28, and 30%), LOX of (20, 13, and 14%), and NO of (48, 38, and 39%) for chitosan, chitosan-BG, and chitosan-BG (Na-free) at 100 μL addition. The in vitro bioactivities proved that the chitosan-BG scaffolds could enable better cell formation, and exhibited improved biocompatibility, and anti-inflammatory and wound healing properties.

Zinc and Strontium-Substituted Bioactive Glass Nanoparticle/Alginate Composites Scaffold for Bone Regeneration

The global population is growing older and entering an aging society. Aging results in severe tissue disorder and organ dysfunction. Bone-related injuries are particularly significant. The need for alternative bone replacement materials for human implants has grown over the past few decades. Alginate has the potential for use as a cell scaffold for bone tissue engineering due to its high bio-compatibility. To improve the bioactivity of alginate scaffolds, zinc- and strontium-containing sol-gel-derived bioactive glass nanoparticles (Zn-Sr-BGNPs) with sizes ranging from 100 to l40 nm were incorporated. Zn-Sr-BGNPs synthesized through the sol-gel process have a high sur-face-to-volume ratio, homogeneity, and purity, resulting in faster degradation. The therapeutic bivalent ions released from Zn-Sr-BGNPs strengthen the cell scaffold and improve the stimulation of the production and development of bone cells. Zn-Sr-BGNPs with different Zn to Si nominal ratios of 0, 1, and 1.5 were mixed with alginate in this research. The ratio of Zn in Zn-Sr-BGNPs and the ratio of Zn-Sr-BGNPs in scaffolds impact the pore size, swelling, and biological properties of synthesized composite scaffolds. The surface area and pore volume of a 1:1 1Zn-Sr-BGNP:Alg composite scaffold were 22.58 m²/g and 0.055 cm³/g, respectively. The incorporation of Zn-Sr-BGNPs improved the mechanical performance of the scaffolds up to 4.73 ± 0.48 MPa. The swelling rate decreased slightly from 2.12 (pure Alg) to 1.50 (1Zn-Sr-BGNP:Alg (1:1)). The 1Zn-Sr-BGNP:Alg (1:1) composite scaffold promoted bioactivity through apatite layer formation, increased bone cell proliferation via the dissolution products released from the scaffold, enhanced calcium deposition, and facilitated cell attachment. Thus, 1Zn-Sr-BGNP:Alg (1:1) composite scaffold is proposed as a possible artificial bone scaffold in bone tissue regeneration.

Influence of varying thermal treatment on bioactive material with equal Ca/P ratio: A local drug delivery system for bone regeneration

Designing a biomaterial with excellent bioactivity, biocompatibility, mechanical strength, porosity, and osteogenic properties is essential to incorporate therapeutic agents in order to promote efficient bone regeneration. The work intended to prepare bioactive glass with tailor-made equal Ca/P (CP) ratio to obtain clinophosinaite (Cpt) as dominant phase. Clinophosinaite (Na₃ CaPSiO₇ ) is one of the rarest phases of bioactive glass (BG), which is supposed to play key role in bioactivity. The novelty of this work is to track the required sintering temperature to attain equimolar calcium phosphate-containing clinophosinaite phase and its behavior. Further, its consequent physicochemical and biological properties were analyzed. Phase transition from Rhenanite to Cpt, and later the Cpt emerged as dominant phase with increase of calcination temperature from 700 to 1000°C was studied. The quantifying evolution of Cpt with Rhenanite over increasing annealing temperature also results with the major morphological modifications. BET analysis confirmed the surface area and porosity (Type-IV mesoporous) were gradually elevated upto 900°C, which had contrary effect on mechanical strength. Formation of hydroxyl carbonate apatite (HCA) layer confirmed the bioactivity of the prepared samples at varying time intervals. The CP samples demonstrated better hemocompatibility in post-immersion (i.e., less than 1% of lysis) when compared with pre-immersion. Enhanced protein adsorption and cumulative release (85%) of Simvastatin (SIM) drug was attained at 900°C treatment.

An enduring in vitro wound healing phase recipient by bioactive glass-graphene oxide nanocomposites

Bioactive glass (BG) is an interesting topic in soft tissue engineering because of its biocompatibility and bonding potential to increase fibroblast cell proliferation, synthesize growth factors, and stimulate granulation tissue development. The proposed BG with and without sodium (Na), prepared by the sol–gel method, is employed in wound healing studies. The BG/graphene oxide (GO) and BG (Na-free)/GO nanocomposites were investigated against fibroblast L929 cells in vitro; the 45S5 BG nanocomposites exhibited desired cell viability (80%), cell proliferation (30%), cell migration (25%), metabolic activity, and wound contraction due to extracellular matrix (ECM) production and enhanced protein release by fibroblast cells. Additionally, the antioxidant assays for BG, BG (Na-free), GO, and BG/GO, BG (Na-free)/GO were evaluated for effective wound healing properties. The results showed decreased inflammation sites in the wound area, assessed by the (2,2-diphenyl-1-picryl-hydrazyl-hydrate) (DPPH) assay with ~ 80% radical scavenging activity, confirming their anti-inflammatory and improved wound healing properties.

Strategies of Bioceramics, Bioactive Glasses in Endodontics: Future Perspectives of Restorative Dentistry

Prevalently, there is a primary strategy to cure caries using restorative materials notably bioceramics. Existing synthetic materials stimulate natural tooth structure with acceptable interfacial bonding and esthetic and biomechanical qualities with better durability. Several bioceramics have been introduced and investigated for their potentialities as restorative materials. Biomineralization of tooth initiates repair and regeneration of natural dental tissue and reinstating the integrity of periodontium. In the evolution of bioceramics in the aspects of different essential composition for dental application, recent technology and modern strategies revolutionize the restorative dentistry. Bioglass is one among the important bioceramics as a restorative material, and by regulating the properties of the material, it is possible to construct improved formulation towards restoration. This article reviews the current revolution of endodontics, existing restorative materials, and technologies to be achieve for engineering materials with the better design.

The Role of the Extracellular Matrix (ECM) in Wound Healing: A Review

The extracellular matrix (ECM) is a 3-dimensional structure and an essential component in all human tissues. It is comprised of varying proteins, including collagens, elastin, and smaller quantities of structural proteins. Studies have demonstrated the ECM aids in cellular adherence, tissue anchoring, cellular signaling, and recruitment of cells. During times of integumentary injury or damage, either acute or chronic, the ECM is damaged. Through a series of overlapping events called the wound healing phases—hemostasis, inflammation, proliferation, and remodeling—the ECM is synthesized and ideally returned to its native state. This article synthesizes current and historical literature to demonstrate the involvement of the ECM in the varying phases of the wound healing cascade.

Unscrambling the Influence of Sodium Cation on the Structure, Bioactivity, and Erythrocyte Compatibility of 45S5 Bioactive Glass

The 45S5 bioglass uttering Class A bioactivity promotes both osteoconduction as well as osteoinduction. Though one of the higher reactive bioactive materials known with structural and physiological influence upon ionic modulation, poor mechanical properties are perceived. The possible solution to overcome the weak stability is to choose material's composition that provides retained bioactivity and improved mechanical stability. Meanwhile, primary burst out of Na⁺ ions increases the local pH, harms cell life, and acts as a well-known disruptive modifying species that weakens the bioactive glass network, decreasing network connectivity, showing faster degradation and lowering mechanical stability. Therefore, in this study, more detailed systematic exploration on structural influence of sodium monovalent cation and its behavior on physiological environment was genuinely studied and reported that bioactivity of the bioactive glass can be highly achieved even without Na⁺ ions. The result exhibits benefits of sodium free bioactive glass (denoted as No Na⁺ BG) over Na⁺ BG and exhibits improved mechanical stability and also possible degradability, having in-built apatite phase even before immersion in simulated body fluid (SBF). Also, sodium free bioglass proved as a superior candidate for erythrocyte compatibility with rapid clotting tendency on interaction with blood and a promising replacement for 45S5 bioglass in all aspects especially in mechanical stability view, which can withstand more than 5 months in phosphate buffer saline (PBS).

Preparation of the bioglass/chitosan-alginate composite scaffolds with high bioactivity and mechanical properties as bone graft materials

Bioglass/chitosan-alginate (BCA) composite scaffolds with remarkable performance for bone tissue engineering are successfully prepared by freeze-drying method. The influence of the addition amount of sodium alginate (SA) on the microstructure, porosity, pore size, swelling ratio, degradation ratio, mechanical properties and mineralization ability of BCA composite scaffolds is studied and characterized by various techniques of the scanning electron microscopy, X-ray diffraction, infrared absorption spectrometer and so on. The results show that the BCA composite scaffolds have the three-dimensional interconnected network structure with the high porosity of 82%-87% and a suitable average pore size of 140-200 μm. With the increase of SA addition, the porosity and pore size of BCA gradually reduced and the thickness of pore wall increased. The swelling and degradation ratios decreased gradually with the raising SA and increased with the prolongation of soaking time in PBS. The mechanical strength of BCA was also significantly enhanced, and the mineralization ability of bioglass was effectively deployed with the adding SA of BCA. The improved performance of BCA may be attributed to the formed 3D network structure, activated bioavailability and crosslinking ability between chitosan and SA. It indicates that BCA composite scaffolds have potential applications in bone issues engineering.

Research Progress, Challenges, and Breakthroughs of Organoids as Disease Models

Traditional cell lines and xenograft models have been widely recognized and used in research. As a new research model, organoids have made significant progress and development in the past 10 years. Compared with traditional models, organoids have more advantages and have been applied in cancer research, genetic diseases, infectious diseases, and regenerative medicine. This review presented the advantages and disadvantages of organoids in physiological development, pathological mechanism, drug screening, and organ transplantation. Further, this review summarized the current situation of vascularization, immune microenvironment, and hydrogel, which are the main influencing factors of organoids, and pointed out the future directions of development.

A 3D cell printing-fabricated HepG2 liver spheroid model for high-content in situ quantification of drug-induced liver toxicity

3D spheroid cultures are attractive candidates for application in in vitro drug-induced hepatotoxicity testing models to improve the reliability of biological information obtainable from a simple 2D culture model. Various 3D spheroid culture models exist for hepatotoxicity screening, but quantitative assays of spheroid response in situ are still challenging to achieve with the current 3D liver toxicity platforms. In this study, we developed a 3D printing-based HepG2 liver spheroid culture model for in situ quantitative evaluation and high-content monitoring of drug-induced hepatotoxicity. HepG2 liver spheroids grown in mini-fabricated hydrogel constructs using a 3D bioprinter were used to obtain the EC₅₀ values and to measure the multi-parametric hepatotoxic effects, including mitochondrial permeability transition (MPT), cytosolic calcium levels, and apoptosis. Interestingly, the average fluorescence intensities of apoptotic and cell death markers, calculated for out-of-focus and in-focus spheroids, increased proportionally as a function of the drug concentration, allowing for the determination of the EC₅₀ values. In addition, 3D HepG2 spheroids were more resistant to nefazodone-induced MPT than 2D HepG2 cells, indicating that the gelatin/alginate hydrogel culture system provides enhanced resistance to hepatotoxic drugs. The drug response of HepG2 liver spheroids was also found to be unrelated to the spheroid size. These results demonstrate that the present 3D cell-printing-based embedded HepG2 liver spheroid platform is a promising approach for screening and characterizing drug-induced hepatotoxicity.

The Translational Application of Hydrogel for Organoid Technology: Challenges and Future Perspectives

Human organoids mimic the physiology and tissue architecture of organs and are of great significance for promoting the study of human diseases. Traditionally, organoid cultures rely predominantly on animal or tumor-derived extracellular matrix (ECM), resulting in poor reproducibility. This limits their utility in for large-scale drug screening and application for regenerative medicine. Recently, synthetic polymeric hydrogels, with high biocompatibility and biodegradability, stability, uniformity of compositions, and high throughput properties, have emerged as potential materials for achieving 3D architectures for organoid cultures. Compared to conventional animal or tumor-derived organoids, these newly engineered hydrogel-based organoids more closely resemble human organs, as they are able to mimic native structural and functional properties observed in-situ. In this review, recent developments in hydrogel-based organoid culture will be summarized, emergent hydrogel technology will be highlighted, and future challenges in applying them to organoid culture will be discussed.

Sodium alginate-bioglass-encapsulated hAECs restore ovarian function in premature ovarian failure by stimulating angiogenic factor secretion

BACKGROUND

Human amniotic epithelial cells (hAECs) exhibit a strong capability to restore ovarian function in chemotherapy-induced premature ovarian failure (POF). However, the therapeutic efficacy of hAECs is usually affected by the limited number and proliferative ability of grafted hAECs in target organs. The transplantation of stem cells encapsulated in sodium alginate-bioglass (SA-BG) composite hydrogel has recently been shown to be an effective strategy for tissue regeneration. The current study aims to investigate the therapeutic potential of hAECs or hAEC-derived conditioned medium (CM) encapsulated in SA-BG in mice with chemotherapy-induced POF.

METHODS

C57BL/6 mice were intraperitoneally injected with chemotherapy drugs to induce POF. hAECs or CM were harvested and encapsulated in SA-BG composite hydrogel, which were transplanted onto the injured ovaries of mice with POF. Follicle development, granulosa cell function, and ovarian angiogenesis were evaluated by morphological methods. To further elucidate the effect of SA-BG-encapsulated hAECs/CM on vascularization, the tube formation of human umbilical vein epithelial cells (hUVECs) was conducted in vitro. Cytokine array and ELISA were used to analyze and quantify the effects of bioactive components released by SA-BG on the secretion of angiogenic factors by hAECs.

RESULTS

The transplantation of SA-BG-encapsulated hAECs/CM restored follicle development, repaired granulosa cell function, and enhanced ovarian angiogenesis in POF mice. The further study showed that SA-BG significantly promoted the tube formation of hUVECs in vitro. Moreover, encapsulating hAECs could facilitate the effect of SA-BG on inducing the formation of the capillary tube in a paracrine manner. In addition, we found that SA-BG extracts significantly enhanced the viability of hAECs and stimulated the secretion of pro-angiogenic factors of hAECs. Notably, compared with SA-BG/CM, SA-BG/hAECs achieve better therapeutic effects, possibly because stimulation of BG enhanced the viability and paracrine capacity of hAECs.

CONCLUSIONS

The present study initially demonstrates that SA-BG-encapsulated hAECs or CM can exert a therapeutic effect on chemotherapy-induced POF mainly by protecting granulosa cell function and enhancing ovarian vascularization, which might provide a novel strategy for the delivery of hAECs for treating POF.

Utility of Air Bladder-Derived Nanostructured ECM for Tissue Regeneration

Exploration for ideal bone regeneration materials still remains a hot research topic due to the unmet clinical challenge of large bone defect healing. Bone grafting materials have gradually evolved from single component to multiple-component composite, but their functions during bone healing still only regulate one or two biological processes. Therefore, there is an urgent need to develop novel materials with more complex composition, which convey multiple biological functions during bone regeneration. Here, we report an naturally nanostructured ECM based composite scaffold derived from fish air bladder and combined with dicalcium phosphate (DCP) microparticles to form a new type of bone grafting material. The DCP/acellular tissue matrix (DCP/ATM) scaffold demonstrated porous structure with porosity over 65% and great capability of absorbing water and other biologics. In vitro cell culture study showed that DCP/ATM scaffold could better support osteoblast proliferation and differentiation in comparison with DCP/ADC made from acid extracted fish collagen. Moreover, DCP/ATM also demonstrated more potent bone regenerative properties in a rat calvarial defect model, indicating incorporation of ECM based matrix in the scaffolds could better support bone formation. Taken together, this study demonstrates a new avenue toward the development of new type of bone regeneration biomaterial utilizing ECM as its key components.