Temperature control and intermittent time-set protocol optimization for minimizing tissue carbonization in microwave ablation

The Effect of Cooling Fluid Composition on Ablation Size in Hepatic Laser Ablation: A Comparative Study in an Ex Vivo Bovine Setting

PURPOSE

Hyperthermic ablation is a minimally invasive mode of tumour therapy which serves as a viable alternative to surgical intervention. However, one of the major drawbacks, besides the heat sink effect and the risk of damaging adjacent organs, is limited ablation size. The use of a cooling fluid during ablation has been shown to increase the ablation volume and decrease the carbonisation rate. The aim of this study was to investigate whether the composition of the cooling fluid has an effect on ablation size and carbonisation rate during hepatic laser ablation in an ex vivo bovine setting.

METHOD

In this study bovine hepatic tissue was ablated in an ex vivo setting using an internally cooled laser applicator. A total of 45 tissue samples were assigned to three groups: 0.9% saline infusion (n = 15), distilled water infusion (n = 15) and a 50%/50% mixture of 0.9% saline and distilled water (n = 15). Ablation was conducted using a 1064 nm Nd:YAG laser at a wattage of 25 W and time interval of 10 min. The ablation volume and carbonisation rate were then measured and recorded through postprocedural MRI. One-way ANOVA and post-hoc testing were performed to assess the effect of the cooling fluid composition on the ablation volumes.

RESULTS

We found that using a mixture of saline and distilled water as a cooling fluid during hyperthermic ablation resulted in a larger ablation volume (mean ± SD: 22.64 ± 0.99 cm3) when compared to saline infusion (21.08 ± 1.11 cm3) or distilled water infusion (20.92 ± 0.92 cm3). This difference was highly significant (p < 0.001). There was no significant difference in ablation size between the saline group and the distilled water group. The highest carbonisation rate occurred in the saline group (12/15), followed by the mixed infusion group (3/15) and the distilled water group (1/15).

CONCLUSIONS

The results of this study suggest that cooling fluid composition during hepatic laser ablation affects ablation volume in an ex vivo bovine setting. There was no statistically significant difference when comparing ablation volumes during saline infusion and distilled water infusion, but the carbonisation rate was significantly higher when using saline. The combination of saline and distilled water in a 50%/50% mixture as cooling fluid appears to be an auspicious alternative, as ablation volumes created with it are larger when compared to saline and distilled water alone, while carbonisation rate remains low. This might improve patient outcome as well as patient eligibility for hyperthermic ablation.

Spacer-Supported Thermal Ablation to Prevent Carbonisation and Improve Ablation Size: A Proof of Concept Study

Thermal ablation offers a minimally invasive alternative in the treatment of hepatic tumours. Several types of ablation are utilised with different methods and indications. However, to this day, ablation size remains limited due to the formation of a central non-conductive boundary layer. In thermal ablation, this boundary layer is formed by carbonisation. Our goal was to prevent or delay carbonisation, and subsequently increase ablation size. We used bovine liver to compare ablation diameter and volume, created by a stand-alone laser applicator, with those created when utilising a spacer between laser applicator and hepatic tissue. Two spacer variants were developed: one with a closed circulation of cooling fluid and one with an open circulation into hepatic tissue. We found that the presence of a spacer significantly increased ablation volume up to 75.3 cm³, an increase of a factor of 3.19 (closed spacer) and 3.02 (open spacer) when compared to the stand-alone applicator. Statistical significance between spacer variants was also present, with the closed spacer producing a significantly larger ablation volume (p < 0.001, M_Diff = 3.053, 95% CI[1.612, 4.493]) and diameter (p < 0.001, M_Diff = 4.467, 95% CI[2.648, 6.285]) than the open spacer. We conclude that the presence of a spacer has the potential to increase ablation size.

Evaluation method of ex vivo porcine liver reduced scattering coefficient during microwave ablation based on temperature

The principle of microwave ablation (MWA) is to cause irreversible damage (protein coagulation, necrosis, etc.) to tumor cells at a certain temperature by heating, thereby destroying the tumor. We have long used functional near-infrared spectroscopy (fNIRs) to monitor clinical thermal ablation efficacy. After a lot of experimental verification, it can be found that there is a clear correlation between the reduced scattering coefficient and the degree of tissue damage. During the MWA process, the reduced scattering coefficient has a stable change. Therefore, both temperature (T) and reduced scattering coefficient ( μ s ′ ${\mu }_{s}^{\prime }$ ) are related to the thermal damage of the tissue. This paper mainly studies the changing law of T and μ s ′ ${\mu }_{s}^{\prime }$ during MWA and establishes a relationship model. The two-parameter simultaneous acquisition system was designed and used to obtain the T and μ s ′ ${\mu }_{s}^{\prime }$ of the ex vivo porcine liver during MWA. The correlation model between T and μ s ′ ${\mu }_{s}^{\prime }$ is established, enabling the quantitative estimation of μ s ′ ${\mu }_{s}^{\prime }$ of porcine liver based on T. The maximum and the minimum relative errors of μ s ′ ${\mu }_{s}^{\prime }$ are 79.01 and 0.39%, respectively. Through the electromagnetic simulation of the temperature field during MWA, 2D and 3D fields of reduced scattering coefficient can also be obtained using this correlation model. This study contributes to realize the preoperative simulation of the optical parameter field of microwave ablation and provide 2D/3D therapeutic effect for clinic.