Carbopol emulgel loaded with ebastine for urticaria: development, characterization, in vitro and in vivo evaluation

A hydrogel-functionalized silver nanocluster for bacterial-infected wound healing

The ever-growing challenges of traditional antibiotic therapy and chronic wound healing have created a hot topic for the development and application of new antimicrobial agents. Silver nanoclusters (Ag NCs) with ultrasmall sizes (<2 nm) and antibacterial effects are promising candidates for next-generation antibiotics, particularly against multi-drug resistant strains. However, the biosafety in the clinical application of Ag NCs remains suboptimal despite some existing studies of Ag NCs for biomedical applications. Considering this, an ultrasmall Ag NC with excellent water solubility was synthesized by a two-phase ligand-exchange method, which exhibits broad-spectrum antibacterial performance. The minimum inhibitory concentrations of Ag NCs against MRSA, S. aureus, P. aeruginosa and E. coli were evaluated as 50, 80, 5 and 5 μg mL-1, respectively. Furthermore, a carbomer hydrogel was prepared to be incorporated into the Ag NCs for achieving excellent biocompatibility and biosafety. In vitro experiments demonstrate that the Ag NC-gel exhibits good antibacterial properties with lower cytotoxicity. Finally, in vivo experiments suggest that this ultrasmall Ag NC functionalized with the hydrogel can serve as an effective and safe antimicrobial agent to aid in wound healing.

Encapsulation of Leptadenia pyrotechnica (Khip) Extract in Carbomer Based Emulgel for Its Enhanced Antioxidant Effects and Its In Vitro Evaluation

BACKGROUND

The use of natural products in skin care has been valued for their tremendous therapeutic benefits since ancient times. The current study was aimed at exploring the Leptadenia pyrotechnica plant extract and development of a stable emulgel loaded with the same extract to assess its cosmeceutical potentials.

METHODOLOGY

A stable emulgel loaded with methanolic plant extract along with its control gel was prepared by homogenization. The antioxidant potential of extracts prepared in different solvents (methanol MLP, ethanol ELP, n-hexane nLP, ethyl acetate EALP, and petroleum ether PLP) was determined by DPPH scavenging activity. The presence of phytochemicals was confirmed by total phenolic and flavonoid content analysis (TPC/TFC). HPLC was used for quantification of bioactive components. FTIR analysis was performed for confirmation of functional groups. SPF was calculated via spectroscopic analysis for extract, control gel, and extract loaded emulgel. Stability studies included physical evaluation, pH, conductivity, spreadability, and rheological testing of both control and test emulgels at different temperatures, i.e., 8 °C ± 1, 25 °C ± 1, 40 °C ± 1, 40 °C ± 1 with RH of 75% for a period of 90 days.

RESULTS

DPPH radical scavenging activity showed the highest antioxidant activity of 85.5% ± 2.78 for MLP. TPC and TFC were also found to be highest for the methanolic fraction, i.e., 190.98 ± 0.40 mgGAE/g and 128.28 ± 2.64 mgQE/g, respectively. The SPF of methanolic extract, placebo gel, and LPEG was 13.43 ± 0.46, 2.37 ± 0.33, and 7.28 ± 0.56, respectively. HPLC assay confirmed the presence of catechin, vanillic acid, caffeic acid, and sinapinic acid. Rheological analysis showed that formulation has pseudo-plastic flow behavior. Other stability tests also revealed that prepared emulgel is a stable one.

CONCLUSION

A stable emulgel loaded with Leptadenia pyrotechnica plant extract was successfully prepared and characterized for its cosmetic effects.

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

Formulation and Evaluation of Prednisolone Sodium Metazoate-Loaded Mucoadhesive Quatsomal Gel for Local Treatment of Recurrent Aphthous Ulcers: Optimization, In Vitro, Ex Vivo, and In Vivo Studies

This study aims to formulate a buccal mucoadhesive gel containing prednisolone sodium metazoate-loaded quatsomes for efficient localized therapy of recurrent aphthous ulcers. Quatsomes were prepared using a varied concentration of quaternary ammonium surfactants (QAS) and cholesterol (CHO). A 2³ factorial design was conducted to address the impact of independent variables QAS type (X₁), QAS to CHO molar ratio (X₂), and sonication time (X₃). The dependent variables were particle size (PS; Y₁), polydispersity index (PDI; Y₂), zeta potential (ZP; Y₃), entrapment efficiency percent (EE%; Y₄) and percent of drug released after 6 h (Q6%: Y₅). Then, the selected quatsomes formula was incorporated into different gel bases to prepare an optimized mucoadhesive gel to be evaluated via in vivo study. The PS of the developed quatsomes ranged from 69.47 ± 0.41 to 113.28 ± 0.79 nm, the PDI from 0.207 ± 0.004 to 0.328 ± 0.004, ZP from 45.15 ± 0.19 to 68.1 ± 0.54 mV, EE% from 79.62 ± 1.44 to 98.60% ± 1.22 and Q6% from 58.39 ± 1.75 to 94.42% ± 2.15. The quatsomal mucoadhesive gel showed rapid recovery of ulcers, which was confirmed by the histological study and the evaluation of inflammatory biomarkers. These results assured the capability of the developed quatsomal mucoadhesive gel to be a promising formulation for treating buccal diseases.

Formulation and evaluation of a novel herbal trio gel containing flax seed extract, carbopol and carboxymethyl cellulose

It is of interest to formulate and evaluate herbal trio gel containing brown flax seed extract, carbopol, and carboxymethyl cellulose and to assess the antimicrobial, anti-inflammatory activity along with quality analysis using SEM and FTIR. The brown flax seeds were grinded into a fine powder and supercritical fluid was prepared which was mixed with CMC and carbopol. The formulation was checked for antimicrobial, anti-inflammatory activity, surface characteristics with SEM and FTIR. The results revealed that the activity of the trio gel was efficacious in hampering the growth of black pigmented anaerobes. The highest zone of inhibition for novel herbal trio gel was recorded at 100 µL measuring 14mm and for the standard chlorhexidine gel it was recorded at 100 µL measuring 23mm in diameter. The results proved that the zone of inhibition of novel herbal trio gel had a decent difference to that of standard chlorhexidine gel. The anti-inflammatory activity showed significant activity at 20 µL which accounted for 53% for the novel herbal trio gel and for the standard diclofenac gel it showed highest activity at 20 µL which accounted for 60%. However, there was not much difference between the herbal trio gel and standard diclofenac gel. SEM observations revealed that the components used in formulation of this trio gel have been bonded well to each other and exhibited appreciable surface characteristics. The lattice of the trio gel has been very well exhibited in SEM analysis. FTIR revealed high peaks showing the different components present in the trio gel. Within the limitations of the study, the results of our study concluded that novel herbal trio gel containing Linum usitatissimum extract, sorbitol, and carboxymethyl cellulose could be an efficient economic primeval substitute that is non-toxic, natural, and structured for clinical application.

Semi-Solid Dosage Forms Containing Pranoprofen-Loaded NLC as Topical Therapy for Local Inflammation: In Vitro, Ex Vivo and In Vivo Evaluation

Pranoprofen (PRA)-loaded nanostructured lipid carriers (NLC) have been dispersed into blank gels composed of 1% of Carbomer 940 (PRA-NLC-Car) and 3% of Sepigel^® 305 (PRA-NLC-Sep) as a novel strategy to refine the biopharmaceutical profile of PRA, for dermal administration in the treatment of skin inflammation that may be caused by possible skin abrasion. This stratagem intends to improve the joining of PRA with the skin, improving its retention and anti-inflammatory effect. Gels were evaluated for various parameters such as pH, morphology, rheology, and swelling. In vitro drug release research and ex vivo permeation through the skin were carried out on Franz diffusion cells. Additionally, in vivo assays were carried out to evaluate the anti-inflammatory effect, and tolerance studies were performed in humans by evaluating the biomechanical properties. Results showed a rheological profile common of semi-solid pharmaceutical forms for dermal application, with sustained release up to 24 h. In vivo studies using PRA-NLC-Car and PRA-NLC-Sep in Mus musculus mice and hairless rats histologically demonstrated their efficacy in an inflammatory animal model study. No signs of skin irritation or modifications of the skin's biophysical properties were identified and the gels were well tolerated. The results obtained from this investigation concluded that the developed semi-solid formulations represent a fitting drug delivery carrier for PRA's transdermal delivery, enhancing its dermal retention and suggesting that they can be utilized as an interesting and effective topical treatment for local skin inflammation caused by a possible abrasion.

Emulgels: Promising Carrier Systems for Food Ingredients and Drugs

Novel delivery systems for cosmetics, drugs, and food ingredients are of great scientific and industrial interest due to their ability to incorporate and protect active substances, thus improving their selectivity, bioavailability, and efficacy. Emulgels are emerging carrier systems that represent a mixture of emulsion and gel, which are particularly significant for the delivery of hydrophobic substances. However, the proper selection of main constituents determines the stability and efficacy of emulgels. Emulgels are dual-controlled release systems, where the oil phase is utilized as a carrier for hydrophobic substances and it determines the occlusive and sensory properties of the product. The emulsifiers are used to promote emulsification during production and to ensure emulsion stability. The choice of emulsifying agents is based on their capacity to emulsify, their toxicity, and their route of administration. Generally, gelling agents are used to increase the consistency of formulation and improve sensory properties by making these systems thixotropic. The gelling agents also impact the release of active substances from the formulation and stability of the system. Therefore, the aim of this review is to gain new insights into emulgel formulations, including the components selection, methods of preparation, and characterization, which are based on recent advances in research studies.

Design and Evaluation of Glimepiride Hydrogel for Transdermal Delivery

The solubility of glimepiride (GM) was improved from 1.6 μg/mL to 22.0 mg/mL when GM and meglumine (MU) complexes were prepared. Therefore, transdermal hydrogels of GM Carbopol (GM-CP) and GM hydroxypropyl methylcellulose pullulan (GM-HPMC-Pu) were prepared successfully utilizing the improved drug solubility by GM-MU. Based on single factor experiment and response surface methodology, two kinds of hydrogel formulations were optimized by drug release studies in vitro. The optimized GM-CP hydrogel was composed of GM, the mixture of azone and oleic acid (1:1, 2.6%, v/v) and carbopol 940 (1%, w/v). The GM-HPMC-Pu hydrogel was developed using GM, HPMC (3.5%, w/v), Pu (1.5%, w/v), glycerol (5%, v/v), azone (2.9%, v/v) and oleic acid (2.6%, v/v). The study of hydrogels in vivo was performed using rabbits. The results indicated that the drug could sustain release from GM-CP or GM-HPMC-Pu hydrogel and maintain the high plasma concentration for 48 h. Compared with commercial GM tablet, the relative bioavailability of GM-CP and GM-HPMC-Pu hydrogel reached up 48% and 133%, respectively. Moreover, the drug release in vitro could well predict its absorption in vivo. There was a good correlation (R² ≥0.966) in GM hydrogel between the drug release in vitro and transdermal absorption in vivo. Therefore, a novel GM hydrogel dosage form may be considered to design.

Modelling and simulation of fluid flow through stenosis and aneurysm blood vessel: a computational hemodynamic analysis

In this article, the hemodynamics of nanofluid flow through the modelled stenosis-aneurysm models in the presence of the catheter has been studied. The eight stenosis-aneurysm models are developed to mimic biological observations and thus make the model more realistic. The mathematical understanding helps in treating the stenosis in the blood vessel by targeting the unhealthy region to the drug, which is coated on nanoparticles. The catheter achieves the active drug release to the aimed organs by coating on the catheter surface, which adds additional benefits. In the present hemodynamic study, the blood is modeled as a couple stress fluid; as a result, the highly non-linear momentum, temperature, and concentration equations were obtained. The fluid flow equations' complexity is further increased by incorporating the variable viscosity effects that arose due to the suspension of nanoparticles. The resultant mathematical model is solved by using the homotopy perturbation method. The convergence of the perturbed solutions is studied and depicted the degree of deformation in the case of temperature and concentration. The effects of the porous nature of the stenosis, no-slip at the catheter surface, and the free slip at the blood vessel boundary in the non-stenotic region are also considered in the model. The essential physiological property like surface shear stress is computed, and various parameters' influence on shear stress is analyzed. The present analysis can be helpful in understanding the enhancement in mass dispersion and heat transfer in unhealthy blood vessels, which could be used for drug delivery in the treatment of stenotic conditions.