Line-broadening analysis of plasma emission produced by laser ablation of metal Cu

Imaging and emission spectroscopy of the submicrosecond plasma generated from copper substrate with nanosecond laser pulses

In this paper, an experimental investigation of the ablation plasma generated from the copper substrate by means of nanosecond laser pulses is presented. We studied the evolution of the ablation plasma in the first 1000 ns after plasma onset using the fast-gated imaging and optical emission spectroscopy methods. Plasma imaging showed that the expansion of the plume front can be described using a so-called drag model, with the expansion limit increasing with laser fluence from 254 µm for 30J/cm² to 375 µm for 67J/cm². By using the Boltzmann plot and Stark broadening methods, it was found that within the first microsecond after onset, the electron excitation temperature and electron number density decrease from 1.2 eV to 0.8 eV and from 4×10¹⁶cm^-3 to 5×10¹⁵cm^-3, respectively. Using the McWhirter criterion, we confirmed that in the considered time range the plasma remains in a state of local thermodynamic equilibrium.

Probing multipulse laser ablation by means of self-mixing interferometry

In this work, self-mixing interferometry (SMI) is implemented inline to a laser microdrilling system to monitor the machining process by probing the ablation-induced plume. An analytical model based on the Sedov-Taylor blast wave equation is developed for the expansion of the process plume under multiple-pulse laser percussion drilling conditions. Signals were acquired during laser microdrilling of blind holes on stainless steel, copper alloy, pure titanium, and titanium nitride ceramic coating. The maximum optical path difference was measured from the signals to estimate the refractive index changes. An amplitude coefficient was derived by fitting the analytical model to the measured optical path differences. The morphology of the drilled holes was investigated in terms of maximum hole depth and dross height. The results indicate that the SMI signal rises when the ablation process is dominated by vaporization, changing the refractive index of the processing zone significantly. Such ablation conditions correspond to limited formation of dross. The results imply that SMI can be used as a nonintrusive tool in laser micromachining applications for monitoring the process quality in an indirect way.