USE OF COMMERCIAL RADON MONITORS FOR LOW LEVEL RADON MEASUREMENTS IN DYNAMICALLY OPERATED VOC EMISSION TEST CHAMBERS

Study of CMOS Sensing System for Radon and Alpha Radiation

This study focuses on a CMOS sensing system for Radon and alpha radiation, which is based on a semiconductor device that is integrated monolithically on a single chip with the Readout Circuitry, thus allowing fabrication of a low-power and low-cost sensing system. The new sensor is based on a new mosaic design of an array of Floating Gate non-volatile memory-like transistors, which are implemented in a standard CMOS technology, with a single polysilicon layer. The transistors are electrically combined in parallel and are operated at subthreshold, thus achieving very high sensitivity and reduced noise. The sensing system’s architecture and design is presented, along with key operation concepts, characterization, and analysis results. Alpha and radon exposure results are compared to commercial radon detectors. The new sensor, dubbed TODOS-Radon sensor, measures continuously, is battery operated and insensitive to humidity.

Natural Building Materials for Interior Fitting and Refurbishment-What about Indoor Emissions?

Indoor air quality can be adversely affected by emissions from building materials, consequently having a negative impact on human health and well-being. In this study, more than 30 natural building materials (earth dry boards and plasters, bio-based insulation materials, and boards made of wood, flax, reed, straw, etc.) used for interior works were investigated as to their emissions of (semi-)volatile organic compounds ((S)VOC), formaldehyde, and radon. The study focused on the emissions from complete wall build-ups as they can be used for internal partition walls and the internal insulation of external walls. Test chambers were designed, allowing the compounds to release only from the surface of the material facing indoors under testing parameters that were chosen to simulate model room conditions. The emission test results were evaluated using the AgBB evaluation scheme, a procedure for the health-related evaluation of construction products and currently applied for the approval of specific groups of building materials in Germany. Seventeen out of 19 sample build-ups tested in this study would have passed this scheme since they generally proved to be low-emitting and although the combined emissions of multiple materials were tested, 50% of the measurements could be terminated before half of the total testing time.

Robustness validation of a test procedure for the determination of the radon-222 exhalation rate from construction products in VOC emission test chambers

This study investigated the adaptation of the state-of-the-art test procedure for the determination of emissions of volatile organic compounds (VOC) from materials into indoor air to test for the radon exhalation from stony construction products. A complete robustness validation including all relevant parameters showed that the procedure can be well applied by testing institutes already holding available the required VOC testing infrastructure that solely needs to be complemented by calibrated commercial radon measurement instrumentation. When measurements of the radon exhalation from construction materials become mandatory by law, test capacity can easily be applied. This work can serve as a recommendation for the European standardisation that still is on hold in this point.