Engineering 3D bio-artificial heart muscle: the acellular ventricular extracellular matrix model

Synthesis of bio-based polyester elastomers and evaluation of the in vivo biocompatibility and biodegradability as biomedical materials

Biodegradable polyester elastomers have found wide applications in the tissue engineering field. In this study, all bio-based polyester elastomer (BPE) is synthesized from five bio-based monomers; and the in vivo...

A methodological nine-step process to bioengineer heart muscle tissue

Research in the field of heart muscle tissue engineering is focused on the fabrication of heart muscle tissue which can be utilized to repair, replace and/or augment functionality of damaged and/or diseased tissue. In the simplest embodiment, bioengineering heart muscle tissue constructs involves culture of cardiomyocytes within natural or synthetic scaffolds. Functional integration of the cells with the scaffold and subsequent remodeling lead to the formation of 3D heart muscle tissue and physiological cues like mechanical stretch, electrical stimulation and perfusion are necessary to guide tissue maturation and development. Potential applications for bioengineered heart muscle include use as grafts to repair or replace damaged tissue, as models for basic research and as tools for high-throughput screening of pharmacological agents. In this article, we provide a methodological process to bioengineer functional 3D heart muscle tissue and discuss state of the art and potential challenges in each of the nine-step tissue fabrication process.

A Highly Conductive 3D Cardiac Patch Fabricated Using Cardiac Myocytes Reprogrammed from Human Adipogenic Mesenchymal Stem Cells

PURPOSE

The objective of this study was to bioengineer 3D patches from cardiac myocytes that have been reprogrammed from human adipogenic mesenchymal stem cells (hADMSCs).

METHODS

Human adipogenic mesenchymal stem cells (hADMSCs) were reprogrammed to form cardiac myocytes using transcription factors ETS2 and MESP1. Reprogrammed cardiac myocytes were cultured in a fibrin gel to bioengineer 3D patch patches. The effect of initial plating density (1-25 million cells per patch), time (28-day culture period) and treatment with 1 μM isoproterenol and 1 μM epinephrine were evaluated.

RESULTS

3D patches were fabricated using cardiac myocytes that have been reprogrammed from hADMSCs. Based on optimization studies, it was determined that 10 million cells were needed to bioengineer a single patch, that measured 2 × 2 cm². Furthermore, 3D patches fabricated 10 million cells were stable in culture for up to 28 days. Treatment of 3D patches with 1 μM isoproterenol and 1 μM epinephrine resulted in an increase in the electrical properties, as measured by electrical impulse amplitude and frequency. An increase in the expression of mTOR, KCNV1, GJA5, KCNJ16, CTNNT2, KCNV2, MYO3, FOXO1 and KCND2 was noted in response to treatment of 3D patches with isoproterenol and epinephrine.

CONCLUSION

Based on the results of this study, there is evidence to support the successful fabrication of a highly functional 3D patches with measurable electrical activity using cardiac myocytes reprogrammed from hADMSCs. 3D patches fabricated using optimal conductions described in this study can be used to improve the functional properties of failing hearts. Predominantly, in case of the infarcted hearts with partial loss of electrical activity, the electrical properties of the 3D patches may restore the electrical activity of the heart.

Polyester elastomers for soft tissue engineering

Polyester elastomers are soft, biodegradable and biocompatible and are commonly used in various biomedical applications, especially in tissue engineering. These synthetic polyesters can be easily fabricated using various techniques such as solvent casting, particle leaching, molding, electrospinning, 3-dimensional printing, photolithography, microablation etc. A large proportion of tissue engineering research efforts have focused on the use of allografts, decellularized animal scaffolds or other biological materials as scaffolds, but they face the major concern of triggering immunological responses from the host, on top of other issues. This review paper will introduce the recent developments in elastomeric polyesters, their synthesis and fabrication techniques, as well as their application in the biomedical field, focusing primarily on tissue engineering in ophthalmology, cardiac and vascular systems. Some of the commercial and near-commercial polyesters used in these tissue engineering fields will also be described.

16-Channel Flexible System to Measure Electrophysiological Properties of Bioengineered Hearts

As tissue engineering continues to mature, it is necessary to develop new technologies that bring insight into current paradigms and guide improvements for future experiments. To this end, we have developed a system to characterize our bioartificial heart model and compare them to functional native structures. In the present study, the hearts of adult Sprague-Dawley were decellularized resulting in a natural three-dimensional cardiac scaffold. Neonatal rat primary cardiac cells were then cultured within a complex 3D fibrin gel, forming a 3-dimensional cardiac construct, which was sutured to the acellular scaffold and suspended in media for 24-48 h. The resulting bioartificial hearts (BAHs) were then affixed with 16 electrodes, in different configurations to evaluate not only the electrocardiographic characteristics of the cultured tissues, but to also test the system's consistency. Histological evaluation showed cellularization and cardiac tissue formation. The BAHs and native hearts were then evaluated with our 16-channel flexible system to acquire the metrics associated with their respective electrophysiological properties. Time delays between the native signals were in the range of 0-95 ms. As well, color maps revealed a trend in impulse propagation throughout the native hearts. After evaluation of the normal rat QRS complex we found the average amplitude of the R-wave to be 5351.48 ± 44.92 μV and the average QRS duration was found to be 10.61 ± 0.18 ms. In contrast, BAHs exhibited more erratic and non-uniform activity that garnered no appreciable quantification. The data collected in this study proves our system's efficacy for EKG data procurement.

Extracellular matrix-derived extracellular vesicles promote cardiomyocyte growth and electrical activity in engineered cardiac atria

Extracellular matrix (ECM) plays a critical role in the provision of the necessary microenvironment for the proper regeneration of the cardiac tissue. However, specific mechanisms that lead to ECM-mediated cardiac regeneration are not well understood. To elucidate the potential mechanisms, we investigated ultra-structures of the cardiac ECM using electron microscopy. Intriguingly, we observed large quantities of micro-vesicles from decellularized right atria. RNA and protein analyses revealed that these contained exosomal proteins and microRNAs (miRNAs), which we referred to herein as ECM-derived extracellular vesicles (ECM-EVs). One particular miRNA from ECM-EVs, miR-199a-3p, promoted cell growth of isolated neonatal cardiomyocytes and sinus nodal cells by repressing homeodomain-only protein (HOPX) expression and increasing GATA-binding 4 (Gata4) acetylation. To determine the mechanisms, we knocked down Gata4 and showed that miR-199a-3p actions required Gata4 for cell proliferation in isolated neonatal cardiomyocytes and sinus nodal cells. To further explore the role of this miRNA, we isolated neonatal cardiac cells and recellularized into atrial ECM, referred here has engineered atria. Remarkably, miR-199a-3p mediated the enrichment of cardiomyocyte and sinus nodal cell population, and enhanced electrocardiographic signal activity of sinus nodal cells in the engineered atria. Importantly, antisense of miRNA (antagomir) against miR-199a-3p was capable of abolishing these actions of miR-199a-3p in the engineered atria. We further showed in Ang II-infused animal model of sinus nodal dysfunction that miR-199-3p-treated cardiac cells remarkably ameliorated and restored the electrical activity as shown by normalization of the ECG, in contrast to untreated cells, which did not show electrical recovery. In conclusion, these results provide clear evidence of the critical role of ECM, in not only providing a scaffold for cardiac tissue growth, but also in promoting atrial electrical function through ECM-derived miR-199a-3p.

Cogels of Hyaluronic Acid and Acellular Matrix for Cultivation of Adipose-Derived Stem Cells: Potential Application for Vocal Fold Tissue Engineering

Stem cells based tissue engineering has been one of the potential promising therapies in the research on the repair of tissue diseases including the vocal fold. Decellularized extracellular matrix (DCM) as a promising scaffold has be used widely in tissue engineering; however, it remained to be an important issue in vocal fold regeneration. Here, we applied the hydrogels (hyaluronic acid [HA], HA-collagen [HA-Col], and HA-DCM) to determine the effects of hydrogel on the growth and differentiation of human adipose-derived stem cells (hADSCs) into superficial lamina propria fibroblasts. hADSCs were isolated and characterized by fluorescence-activated cell sorting. The results indicated that HA-DCM hydrogel enhanced cell proliferation and prolonged cell morphology significantly compared to HA and HA-Col hydrogel. Importantly, the differentiation of hADSCs into fibroblasts was also promoted by cogels of HA-Col and HA-DCM significantly. The differentiation of hADSCs towards superficial lamina propria fibroblasts was accelerated by the secretion of HGF, IL-8, and VEGF, the decorin and elastin expression, and the synthesis of chondroitin sulfate significantly. Therefore, the cogel of HA-DCM hydrogel was shown to be outstanding in apparent stimulation of hADSCs proliferation and differentiation to vocal fold fibroblasts through secretion of important growth factors and synthesis of extracellular matrix.

The design and fabrication of a three-dimensional bioengineered open ventricle

Current treatments in hypoplastic left heart syndrome (HLHS) include multiple surgeries to refunctionalize the right ventricle and/or transplant. The development of a tissue-engineered left ventricle (LV) would provide a therapeutic option to overcome the inefficiencies and limitations associated with current treatment options. This study provides a foundation for the development and fabrication of the bioengineered open ventricle (BEOV) model. BEOV molds were developed to emulate the human LV geometry; molds were used to produce chitosan scaffolds. BEOV were fabricated by culturing 30 million rat neonatal cardiac cells on the chitosan scaffold. The model demonstrated 57% cell retention following 4days culture. The average biopotential output for the model was 1615 µV. Histological assessment displayed the presence of localized cell clusters, with intercellular and cell-scaffold interactions. The BEOV provides a novel foundation for the development of a 3D bioengineered LV for application in HLHS. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2206-2217, 2017.

Optimizing cell seeding and retention in a three-dimensional bioengineered cardiac ventricle: The two-stage cellularization model

Current cell seeding techniques focus on passively directing cells to a scaffold surface with the addition of dynamic culture to encourage cell permeation. In 3D tissue engineered constructs, cell retention efficiency is dependent on the cell delivery method, and biomaterial properties. Passive cell delivery relies on cell migration to the scaffold surface; biomaterial surface properties and porosity determine cell infiltration capacity. As a result, cell retention efficiencies remain low. The development of an effective two-stage cell seeding technique, coupled with perfusion culture, provides the potential to improve cellularization efficiency, and retention. This study, uses a chitosan bioengineered open ventricle (BEOV) scaffold to produce a two-stage perfusion cultured ventricle (TPCV). TPCV were fabricated by direct injection of 10 million primary rat neonatal cardiac cells, followed by wrapping of the outer scaffold surface with a 3D fibrin gel artificial heart muscle patch; TPCV were perfusion cultured for 3 days. The average biopotential output was 1.731 mV. TPCV cell retention following culture was approximately 5%. Cardiac cells were deposited on the scaffold surface and formed intercellular connections. Histological assessment displayed localized cell clusters, with some dissemination, and validated the observed presence of intercellular and gap-junction interactions. The study demonstrates initial effectiveness of our two-stage cell delivery concept, based on function and biological metrics. Biotechnol. Bioeng. 2016;113: 2275-2285. © 2016 Wiley Periodicals, Inc.

Establishing the Framework for Fabrication of a Bioartificial Heart

There is a chronic shortage of donor hearts. The ability to fabricate complete bioartificial hearts (BAHs) may be an alternative solution. The current study describes a method to support the fabrication and culture of BAHs. Rat hearts were isolated and subjected to a detergent based decellularization protocol to remove all cellular components, leaving behind an intact extracellular matrix. Primary cardiac cells were isolated from neonatal rat hearts, and direct cell transplantation was used to populate the acellular scaffolds. Bioartificial hearts were maintained in a custom fabrication gravity fed perfusion culture system to support media delivery. The functional performance of BAHs was assessed based on left ventricle pressure and on electrocardiogram. Furthermore, BAHs were sectioned and stained for the whole heart cardiac tissue distribution and for cardiac molecules, such as α-actinin, cardiac troponin I, collagen type I, connexin 43, von Willebrand factor, and ki67. Bioartificial hearts replicated a partial subset of properties of natural rat hearts. The current study provided a method for fabrication of a BAH and revealed challenges toward BAH fabrication with functional performance metrics of natural mammalian hearts.