Investigation of early cell-surface interactions of human mesenchymal stem cells on nanopatterned β-type titanium-niobium alloy surfaces

Recent advances in engineering nanotopographic substrates for cell studies

Cells sense their environment through the cell membrane receptors. Interaction with extracellular ligands induces receptor clustering at the nanoscale, assembly of the signaling complexes in the cytosol and activation of downstream signaling pathways, regulating cell response. Nanoclusters of receptors can be further organized hierarchically in the cell membrane at the meso- and micro-levels to exert different biological functions. To study and guide cell response, cell culture substrates have been engineered with features that can interact with the cells at different scales, eliciting controlled cell responses. In particular, nanoscale features of 1–100 nm in size allow direct interaction between the material and single cell receptors and their nanoclusters. Since the first “contact guidance” experiments on parallel microstructures, many other studies followed with increasing feature resolution and biological complexity. Here we present an overview of the advances in the field summarizing the biological scenario, substrate fabrication techniques and applications, highlighting the most recent developments.

Matrix stiffness regulates the immunomodulatory effects of mesenchymal stem cells on macrophages via AP1/TSG-6 signaling pathways

It is well-recognized that the matrix stiffness as an important stem cell niche can mediate stem cell behavior such as attachment, proliferation and differentiation, but how matrix stiffness affects the immunomodulatory efficacy of stem cells has been little explored, which, however, is of significant importance in determining the outcomes of stem cell-based therapies and engineered tissue mimics. We herein studied the immunomodulatory efficacy of mesenchymal stem cells (MSCs) in response to matrix stiffness by the evaluation of macrophage polarization in vitro and inflammatory response in vivo by subcutaneous implantation of MSC-laden hydrogels. Remarkably, we found that soft matrix enabled MSCs to produce significantly higher levels of immunomodulatory factors compared to stiff matrix, and induced the presence of more anti-inflammatory macrophages in vitro and attenuated macrophages-mediated inflammatory response in vivo. More importantly, we revealed stiffness-mediated immunoregulatory effect of MSCs was mainly attributed to tumor necrosis factor-α-stimulated protein 6 (TSG-6), which was mechanosensitively regulated by the MAPK and Hippo signaling pathway and downstream AP1 complex, and which in turn exerted an effect on macrophages through CD44 receptor to inhibit NF-κB pathway. To conclude, our results for the first time identify TSG-6 as the key factor in regulating immunomodulatory efficacy of MSCs in mechanical response, and can be potentially utilized to empower stem cell-based therapy and tissue engineering strategy in regenerative medicine. STATEMENT OF SIGNIFICANCE: Matrix stiffness as an important stem cell niche can mediate stem cell behavior such as attachment and differentiation, but how matrix stiffness affects the immunomodulatory efficacy of stem cells has been little explored, which, however, is of significant importance in determining the outcomes of stem cell-based therapies and engineered tissue mimics. Our results for the first time identify TSG-6 as the key factor in regulating the immunomodulatory efficacy of MSCs in mechanical response, which was regulated by the MAPK and Hippo signaling pathways and downstream AP1 complex, and which in turn exerted an effect on macrophages through CD44 receptor to inhibit NF-κB pathway, and can be potentially utilized to empower stem cell-based therapy and tissue engineering strategy in regenerative medicine.

Tribocorrosion-Resistant Ti40Nb-TiN Composites Having TiO2-Based Nanotubular Surfaces

A novel multifunctional material was developed by hard TiN particle reinforcement addition to a β-type Ti40Nb alloy, followed by surface functionalization, yielding the formation of a nanotubular layer. Corrosion and tribocorrosion behaviors were investigated in a phosphate-buffered saline solution at body temperature. The results revealed that the Ti40Nb-TiN composites presented similar ipass and E(i=0) values together with relatively similar Rox and Cox. However, its tribocorrosion resistance drastically improved (wear volume is almost 15 times lower than an unreinforced alloy) as a consequence of the load-carrying effect given by the reinforcement phases. The corrosion and tribocorrosion behaviors were further improved through surface functionalization as observed by significantly lower ipass and higher Rox values and almost undetectable wear volume loss from tribocorrosion tests due to the formation of a well-adhered anatase-rutile TiO2-based nanotubular layer.

Advances in Laser Additive Manufacturing of Ti-Nb Alloys: From Nanostructured Powders to Bulk Objects

The additive manufacturing of low elastic modulus alloys that have a certain level of porosity for biomedical needs is a growing area of research. Here, we show the results of manufacturing of porous and dense samples by a laser powder bed fusion (LPBF) of Ti-Nb alloy, using two distinctive fusion strategies. The nanostructured Ti-Nb alloy powders were produced by mechanical alloying and have a nanostructured state with nanosized grains up to 90 nm. The manufactured porous samples have pronounced open porosity and advanced roughness, contrary to dense samples with a relatively smooth surface profile. The structure of both types of samples after LPBF is formed by uniaxial grains having micro- and nanosized features. The inner structure of the porous samples is comprised of an open interconnected system of pores. The volume fraction of isolated porosity is 2 vol. % and the total porosity is 20 vol. %. Cell viability was assessed in vitro for 3 and 7 days using the MG63 cell line. With longer culture periods, cells showed an increased cell density over the entire surface of a porous Ti-Nb sample. Both types of samples are not cytotoxic and could be used for further in vivo studies.

Integrin-Targeting Peptides for the Design of Functional Cell-Responsive Biomaterials

Integrins are a family of cell surface receptors crucial to fundamental cellular functions such as adhesion, signaling, and viability, deeply involved in a variety of diseases, including the initiation and progression of cancer, of coronary, inflammatory, or autoimmune diseases. The natural ligands of integrins are glycoproteins expressed on the cell surface or proteins of the extracellular matrix. For this reason, short peptides or peptidomimetic sequences that reproduce the integrin-binding motives have attracted much attention as potential drugs. When challenged in clinical trials, these peptides/peptidomimetics let to contrasting and disappointing results. In the search for alternative utilizations, the integrin peptide ligands have been conjugated onto nanoparticles, materials, or drugs and drug carrier systems, for specific recognition or delivery of drugs to cells overexpressing the targeted integrins. Recent research in peptidic integrin ligands is exploring new opportunities, in particular for the design of nanostructured, micro-fabricated, cell-responsive, stimuli-responsive, smart materials.

RGD-Dendrimer-Poly(L-lactic) Acid Nanopatterned Substrates for the Early Chondrogenesis of Human Mesenchymal Stromal Cells Derived from Osteoarthritic and Healthy Donors

Aiming to address a stable chondrogenesis derived from mesenchymal stromal cells (MSCs) to be applied in cartilage repair strategies at the onset of osteoarthritis (OA), we analyzed the effect of arginine–glycine–aspartate (RGD) density on cell condensation that occurs during the initial phase of chondrogenesis. For this, we seeded MSC-derived from OA and healthy (H) donors in RGD-dendrimer-poly(L-lactic) acid (PLLA) nanopatterned substrates (RGD concentrations of 4 × 10⁻⁹, 10⁻⁸, 2.5 × 10⁻⁸, and 10⁻² w/w), during three days and compared to a cell pellet conventional three-dimensional culture system. Molecular gene expression (collagens type-I and II–COL1A1 and COL2A1, tenascin-TNC, sex determining region Y-box9-SOX9, and gap junction protein alpha 1–GJA1) was determined as well as the cell aggregates and pellet size, collagen type-II and connexin 43 proteins synthesis. This study showed that RGD-tailored first generation dendrimer (RGD-Cys-D1) PLLA nanopatterned substrates supported the formation of pre-chondrogenic condensates from OA- and H-derived human bone marrow-MSCs with enhanced chondrogenesis regarding the cell pellet conventional system (presence of collagen type-II and connexin 43, both at the gene and protein level). A RGD-density dependent trend was observed for aggregates size, in concordance with previous studies. Moreover, the nanopatterns’ had a higher effect on OA-derived MSC morphology, leading to the formation of bigger and more compact aggregates with improved expression of early chondrogenic markers.

Osteogenic differentiation of bone marrow-derived mesenchymal stem cells on anodized niobium surface

Currently, titanium and its alloys are the most used materials for biomedical applications. However, because of the high costs of these metals, new materials, such as niobium, have been researched. Niobium appears as a promising material due to its biocompatibility, and excellent corrosion resistance. In this work, anodized niobium samples were produced and characterized. Their capacity to support the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BM-MSCs) was also tested. The anodized niobium samples were characterized by SEM, profilometry, XPS, and wettability. BM-MSCs were cultured on the samples during 14 days, and tested for cell adhesion, metabolic activity, alkaline phosphatase activity, and mineralization. Results demonstrated that anodization promotes the formation of a hydrophilic nanoporous oxide layer on the Nb surface, which can contribute to the increase in the metabolic activity, and in osteogenic differentiation of BM-MSCs, as well as to the extracellular matrix mineralization.

Dendrimer-based Uneven Nanopatterns to Locally Control Surface Adhesiveness: A Method to Direct Chondrogenic Differentiation

Cellular adhesion and differentiation is conditioned by the nanoscale disposition of the extracellular matrix (ECM) components, with local concentrations having a major effect. Here we present a method to obtain large-scale uneven nanopatterns of arginine-glycine-aspartic acid (RGD)-functionalized dendrimers that permit the nanoscale control of local RGD surface density. Nanopatterns are formed by surface adsorption of dendrimers from solutions at different initial concentrations and are characterized by water contact angle (CA), X-ray photoelectron spectroscopy (XPS), and scanning probe microscopy techniques such as scanning tunneling microscopy (STM) and atomic force microscopy (AFM). The local surface density of RGD is measured using AFM images by means of probability contour maps of minimum interparticle distances and then correlated with cell adhesion response and differentiation. The nanopatterning method presented here is a simple procedure that can be scaled up in a straightforward manner to large surface areas. It is thus fully compatible with cell culture protocols and can be applied to other ligands that exert concentration-dependent effects on cells.

Influence of different grained powders and pellets made of Niobium and Ti-42Nb on human cell viability

Nowadays, biomaterials can be used to maintain or replace several functions of the human body if necessary. Titanium and its alloys, i.e. Ti6Al4V are the most common materials (70 to 80%) used for structural orthopedic implants due to their unique combination of good mechanical properties, corrosion resistance and biocompatibility. Addition of β-stabilizers, e.g. niobium, can improve the mechanical properties of such titanium alloys further, simultaneously offering excellent biocompatibility. In this in vitro study, human osteoblasts and fibroblasts were cultured on different niobium specimens (Nb Amperit, Nb Ampertec), Nb sheets and Ti-42Nb (sintered and 3D-printed by selective laser melting, SLM) and compared with forged Ti6Al4V specimens. Furthermore, human osteoblasts were incubated with particulates of the Nb and Ti-42Nb specimens in three concentrations over four and seven days to imitate influence of wear debris. Thereby, the specimens with the roughest surfaces, i.e. Ti-42Nb and Nb Ampertec, revealed excellent and similar results for both cell types concerning cell viability and collagen synthesis superior to forged Ti6Al4V. Examinations with particulate debris disclosed a dose-dependent influence of all powders with Nb Ampertec showing the highest decrease of cell viability and collagen synthesis. Furthermore, interleukin synthesis was only slightly increased for all powders. In summary, Nb Ampertec (sintered Nb) and Ti-42Nb materials seem to be promising alternatives for medical applications compared to common materials like forged or melted Ti6Al4V.

Modulation of human multipotent and pluripotent stem cells using surface nanotopographies and surface-immobilised bioactive signals: A review

The ability to control the interactions of stem cells with synthetic surfaces is proving to be effective and essential for the quality of passaged stem cells and ultimately the success of regenerative medicine. The stem cell niche is crucial for stem cell self-renewal and differentiation. Thus, mimicking the stem cell niche, and here in particular the extracellular matrix (ECM), in vitro is an important goal for the expansion of stem cells and their applications. Here, surface nanotopographies and surface-immobilised biosignals have been identified as major factors that control stem cell responses. The development of tailored surfaces having an optimum nanotopography and displaying suitable biosignals is proposed to be essential for future stem cell culture, cell therapy and regenerative medicine applications. While early research in the field has been restricted by the limited availability of micro- and nanofabrication techniques, new approaches involving the use of advanced fabrication and surface immobilisation methods are starting to emerge. In addition, new cell types such as induced pluripotent stem cells (iPSCs) have become available in the last decade, but have not been fully understood. This review summarises significant advances in the area and focuses on the approaches that are aimed at controlling the behavior of human stem cells including maintenance of their self-renewal ability and improvement of their lineage commitment using nanotopographies and biosignals. More specifically, we discuss developments in biointerface science that are an important driving force for new biomedical materials and advances in bioengineering aiming at improving stem cell culture protocols and 3D scaffolds for clinical applications. Cellular responses revolve around the interplay between the surface properties of the cell culture substrate and the biomolecular composition of the cell culture medium. Determination of the precise role played by each factor, as well as the synergistic effects amongst the factors, all of which influence stem cell responses is essential for future developments. This review provides an overview of the current state-of-the-art in the design of complex material surfaces aimed at being the next generation of tools tailored for applications in cell culture and regenerative medicine.

STATEMENT OF SIGNIFICANCE

This review focuses on the effect of surface nanotopographies and surface-bound biosignals on human stem cells. Recently, stem cell research attracts much attention especially the induced pluripotent stem cells (iPSCs) and direct lineage reprogramming. The fast advance of stem cell research benefits disease treatment and cell therapy. On the other hand, surface property of cell adhered materials has been demonstrated very important for in vitro cell culture and regenerative medicine. Modulation of cell behavior using surfaces is costeffective and more defined. Thus, we summarise the recent progress of modulation of human stem cells using surface science. We believe that this review will capture a broad audience interested in topographical and chemical patterning aimed at understanding complex cellular responses to biomaterials.

Evaluation of the effect of adipose tissue-derived stem cells on the quality of bone healing around implants

PURPOSE/AIM

This study evaluates the efficacy of grafted adipose-derived stem cells (ADSCs) on blade-type implants in improving osseointegration in rat femurs using a low-density bone model.

MATERIALS AND METHODS

After isolating and expanding ADSCs, twice-passaged cells were seeded on blade-type implants on culture plates. Osteogenic induction of grafted cells began after attaching cells to the prepared titanium surfaces and it continued for 4 days. The scaffolds were then implanted in the femurs of Wistar rats. Osteogenic differentiation of these cells was confirmed using polymerase chain reaction (PCR) and alizarin red staining of the mineralized extracellular matrix. After 8 weeks, histological and histomorphometric evaluations of undecalcified resin sections (bone-implant contact [BIC] % and bone mineral index [BMI]) were performed using light microscopy and scanning electron microscopy.

RESULTS

Alizarin red staining in conjunction with gene expression results confirmed osteogenic differentiation. Histomorphometric assessment using scanning electron microscopy demonstrated improved BIC% and BMI near the treated surface compared with the untreated surface.

CONCLUSIONS

The complex of differentiated grafted ADSCs and extracellular matrix and the macrodesign and microdesign of the implant can improve osseointegration in low-density bone.

Controlled Self-Assembly of Hexagonal Nanoparticle Patterns on Nanotopographies

Diblock copolymer micelle nanolithography (BCML) is a versatile and efficient method to cover large surface areas with hexagonally ordered arrays of metal nanoparticles, in which the nanoparticles are equally spaced. However, this method falls short of providing a controlled allocation of such regular nanoparticle arrays with specific spacing into micropatterns. We present here a quick and high-throughput method to generate quasi-hexagonal nanoparticle structures with well-defined interparticle spacing on segments of nanotopographic Si substrates. The topographic height of these segments plays a dominant role in dictating the spacing between the gold nanoparticles, as the nanoparticle arrangement is controlled by immersion forces and by their self-assembly within the segments. Our novel strategy of employing a single-step BCML routine is a highly promising method for the fabrication of regular gold nanopatterns in micropatterns for a wide range of applications.