Concentration and velocity patterns in a horizontal rotating suspension of non-Brownian settling particles

In situ syringe rotation system for heavy microparticle suspension stability in electrospinning technique

Electrospinning allows the fabrication of polymeric nonwovens with a wide variety of inclusions in the micro-nanofibers. However, the electrospinning of microparticle-filled polymer solutions is still limited in particle size, density, and concentration, mainly due to suspension instability during the electrospinning process, so it is not commonly investigated despite the vast number of possible applications. In this study, a simple and effective novel rotation device was developed to prevent the settling of microparticles in the polymer solution during electrospinning. The stability of polyvinyl alcohol and polyvinylidene fluoride (PVDF) solutions with indium microparticles (IMPs) of (42 ± 7) μm diameter was evaluated using LASER transmittance inside a syringe, both static and rotating for 24 h. While the static suspensions completely settled at 7 min and 9 h, respectively, depending on solution viscosity, the rotating suspensions remained stable throughout the experiment. The number and distribution of IMPs in PVDF electrospun mats were determined by optic microscopy and a novel x-ray imaging mapping method, showing 165% more IMPs in the mat obtained with the rotating syringe device. A simple analysis of the theoretical background of settling and rotating suspensions was included to understand the working mechanism of the device. Also, the electrospinning of solutions with high loadings of IMPs (up to 400% w/w PVDF) was accomplished. The simplicity and outstanding efficiency of the device shown in this work may serve as a solution to technical difficulties and as an encouragement to future research in microparticle-filled solution electrospinning.

Using rotation to organize cellulose nanocrystals inside a fiber

We demonstrate for the first time that continuous rotation of a mixture of cellulose nanocrystals (CNCs) and monomer in a capillary tube results in well-organized structures. In the experiments, a capillary tube charged with an aqueous suspension of CNCs and hydroxyethyl acrylate was continuously rotated, then the structure was fixed in place by UV-initiated polymerization. The organization of the liquid crystalline structure that forms inside the tube depends on the rotation conditions and is captured in the polymer resin. The effects of rotation speed, rotation angle and CNC concentration were evaluated and are discussed based on fluid dynamic models. We demonstrate that it is possible to develop a core-shell fiber through this technique based on secondary Dean flow. The outer shell of the fiber shows well-ordered concentric rings with chiral nematic structure, while the inner core remains isotropic. Such fibers have potential applications in the field of optics. Overall, we demonstrate that rotation could be applied as a novel method to organize liquid crystals in a confined environment.

Dynamics of bidensity particle suspensions in a horizontal rotating cylinder

We report Stokesian dynamics simulations of bidensity suspensions rotating in a horizontal cylinder. We studied the phase space and radial and axial patterns in settling as well as floating systems. Each system was composed of particle mixtures of two different densities. As many as eight unique phases are identified for each system along the radial plane. The bidensity system shows similarity to the monodisperse case only when the radial distribution of the particles is completely uniform. Characteristic behavior of the bidensity systems is identical at low rotation rates and contrasting when centrifugal force dominates. Expressing the phase boundaries in terms of dimensionless parameters U_{s}/(ΩR) and g/(Ω^{2}R) gives a linear fit unifying the data in the gravity-dominated regime. At high rotation rates, the behavior is opposing for either system though linear in nature. In the axial direction, number density profiles of both systems affirm the phenomenon of band formation. Location of the axial bands remains the same for heavy and light particles in both systems. We have also reestablished that an inhomogeneous particle configuration in the radial plane induces growing instabilities in the axial plane which amplify to form particle bands similar to monodisperse suspensions.

Circular band formation for incompressible viscous fluid-rigid-particle mixtures in a rotating cylinder

In this paper we have investigated a circular band formation of fluid-rigid-particle mixtures in a fully filled cylinder horizontally rotating about its cylinder axis by direct numerical simulation. These phenomena are modeled by the Navier-Stokes equations coupled to the Euler-Newton equations describing the rigid solid motion of the non-neutrally particles. The formation of circular bands studied in this paper is mainly caused by the interaction between particles themselves. Within a circular band, the part of the band formed by the particles moving from the front to the back through the upper portion of the cylinder becomes more compact due to the particle interaction strengthened by the speedup of the particle speeds first by the rotation and later by the rotation and the gravity. The part of a band formed by the particles moving from the back to the front through the lower portion of the cylinder is always loosening up and spreading out due to the slowdown of the particle motion first by the rotation and then by the rotation and the counter effect of the gravity. To have a compact circular band, particles have to interact among themselves continuously through the entire circular band at an angular speed so that the separation of particles can be balanced by their aggregation.