Chevron defect at the intersection of grain boundaries with free surfaces in Au

Atomic-scale observation of dynamic grain boundary structural transformation during shear-mediated migration

Grain boundary (GB) structural change is commonly observed during and after stress-driven GB migration in nanocrystalline materials, but its exact atomic scale transformation has not been explored experimentally. Here, using in situ high-resolution transmission electron microscopy combined with molecular dynamics simulations, we observed the dynamic GB structural transformation stemming from reversible facet transformation and GB dissociation during the shear-mediated migration of faceted GBs in gold nanocrystals. A reversible transformation was found to occur between (002)/(111) and Σ11(113) GB facets, accomplished by the coalescence and detachment of [Formula: see text]-type GB steps or disconnections that mediated the GB migration. In comparison, the dissociation of (002)/(111) GB into Σ11(113) and Σ3(111) GBs occurred via the reaction of [Formula: see text]-type steps that involved the emission of partial dislocations. Furthermore, these transformations were loading dependent and could be accommodated by GB junctions. This work provides atomistic insights into the dynamic structural transformation during GB migration.

Molecular mechanics of Ag nanowire transfer processes subjected to contact loading by a PDMS substrate

Precise transfer and attachment of a single nanowire to a target substrate is an interesting technique in surface engineering. The spacing, which restrains the attachment of a nanowire to a substrate, and the bending strain that occurs when the nanowire detaches from the elastomeric donor are important design parameters. In this regard, in this study, all-atom molecular dynamics (MD) simulations were conducted to analyse the mechanical behaviour of a penta-twinned silver nanowire (AgNW) placed on a polydimethylsiloxane (PDMS) donor substrate to elucidate the relevant transfer process. The bow deformation of the AgNW at the delamination front of PDMS was characterized as a function of its diameter and aspect ratio. The mechanisms of dislocation slip and propagation as well as the internal stress distribution of the AgNW were then examined. The results showed that twin boundary formation during the bow deformation is a key factor affecting the strain hardening of the AgNW and leading to complete plastic strain recovery after the removal of the PDMS substrate. Furthermore, the process was demonstrated experimentally by a localized bonding and transfer of AgNWs by continuous-wave laser irradiation. Based on the computational and experimental findings, an empirical model considering the shape parameters of AgNWs that can ensure a successful transfer process was established, which is essential for high-performance AgNW electrode design.

Microstructural origin of locally enhanced CO2 electroreduction activity on gold

Understanding how the bulk structure of a material affects catalysis on its surface is critical to the development of actionable catalyst design principles. Bulk defects have been shown to affect electrocatalytic materials that are important for energy conversion systems, but the structural origins of these effects have not been fully elucidated. Here we use a combination of high-resolution scanning electrochemical cell microscopy and electron backscatter diffraction to visualize the potential-dependent electrocatalytic carbon dioxide [Formula: see text] electroreduction and hydrogen [Formula: see text] evolution activity on Au electrodes and probe the effects of bulk defects. Comparing colocated activity maps and videos to the underlying microstructure and lattice deformation supports a model in which CO₂ electroreduction is selectively enhanced by surface-terminating dislocations, which can accumulate at grain boundaries and slip bands. Our results suggest that the deliberate introduction of dislocations into materials is a promising strategy for improving catalytic properties.

Microscopic Deformation Modes and Impact of Network Anisotropy on the Mechanical and Electrical Performance of Five-fold Twinned Silver Nanowire Electrodes

Silver nanowire (AgNW) networks show excellent optical, electrical, and mechanical properties, which make them ideal candidates for transparent electrodes in flexible and stretchable devices. Various coating strategies and testing setups have been developed to further improve their stretchability and to evaluate their performance. Still, a comprehensive microscopic understanding of the relationship between mechanical and electrical failure is missing. In this work, the fundamental deformation modes of five-fold twinned AgNWs in anisotropic networks are studied by large-scale SEM straining tests that are directly correlated with corresponding changes in the resistance. A pronounced effect of the network anisotropy on the electrical performance is observed, which manifests itself in a one order of magnitude lower increase in resistance for networks strained perpendicular to the preferred wire orientation. Using a scale-bridging microscopy approach spanning from NW networks to single NWs to atomic-scale defects, we were able to identify three fundamental deformation modes of NWs, which together can explain this behavior: (i) correlated tensile fracture of NWs, (ii) kink formation due to compression of NWs in transverse direction, and (iii) NW bending caused by the interaction of NWs in the strained network. A key observation is the extreme deformability of AgNWs in compression. Considering HRTEM and MD simulations, this behavior can be attributed to specific defect processes in the five-fold twinned NW structure leading to the formation of NW kinks with grain boundaries combined with V-shaped surface reconstructions, both counteracting NW fracture. The detailed insights from this microscopic study can further improve fabrication and design strategies for transparent NW network electrodes.

Grain boundary phases in bcc metals

We report a computational discovery of novel grain boundary structures and multiple grain boundary phases in elemental body-centered cubic (bcc) metals represented by tungsten, tantalum and molybdenum. While grain boundary structures created by the γ-surface method as a union of two perfect half crystals have been studied extensively, it is known that the method has limitations and does not always predict the correct ground states. Herein, we use a newly developed computational tool, based on evolutionary algorithms, to perform a grand-canonical search of high-angle symmetric tilt and twist boundaries, and we find new ground states and multiple phases that cannot be described using the conventional structural unit model. We use molecular dynamics (MD) simulations to demonstrate that the new structures can coexist at finite temperature in a closed system, confirming that these are examples of different grain boundary phases. The new ground state is confirmed by first-principles calculations.

Selective increase in CO2 electroreduction activity at grain-boundary surface terminations

Altering a material's catalytic properties requires identifying structural features that give rise to active surfaces. Grain boundaries create strained regions in polycrystalline materials by stabilizing dislocations and may provide a way to create high-energy surfaces for catalysis that are kinetically trapped. Although grain-boundary density has previously been correlated with catalytic activity for some reactions, direct evidence that grain boundaries create surfaces with enhanced activity is lacking. We used a combination of bulk electrochemical measurements and scanning electrochemical cell microscopy with submicrometer resolution to show that grain-boundary surface terminations in gold electrodes are more active than grain surfaces for electrochemical carbon dioxide (CO₂) reduction to carbon monoxide (CO) but not for the competing hydrogen (H₂) evolution reaction. The catalytic footprint of the grain boundary is commensurate with its dislocation-induced strain field, providing a strategy for broader exploitation of grain-boundary effects in heterogeneous catalysis.

A Direct Grain-Boundary-Activity Correlation for CO Electroreduction on Cu Nanoparticles

Copper catalyzes the electrochemical reduction of CO to valuable C2+ products including ethanol, acetate, propanol, and ethylene. These reactions could be very useful for converting renewable energy into fuels and chemicals, but conventional Cu electrodes are energetically inefficient and have poor selectivity for CO vs H2O reduction. Efforts to design improved catalysts have been impeded by the lack of experimentally validated, quantitative structure-activity relationships. Here we show that CO reduction activity is directly correlated to the density of grain boundaries (GBs) in Cu nanoparticles (NPs). We prepared electrodes of Cu NPs on carbon nanotubes (Cu/CNT) with different average GB densities quantified by transmission electron microscopy. At potentials ranging from -0.3 V to -0.5 V vs the reversible hydrogen electrode, the specific activity for CO reduction to ethanol and acetate was linearly proportional to the fraction of NP surfaces comprised of GB surface terminations. Our results provide a design principle for CO reduction to ethanol and acetate on Cu. GB-rich Cu/CNT electrodes are the first NP catalysts with significant CO reduction activity at moderate overpotential, reaching a mass activity of up to ∼1.5 A per gram of Cu and a Faradaic efficiency >70% at -0.3 V.

Step Coalescence by Collective Motion at an Incommensurate Grain Boundary

Using extended time series scanning transmission electron microscopy, we investigate structural fluctuations at an incommensurate grain boundary in Au. Atomic-resolution imaging reveals the coalescence of two interfacial steps, or disconnections, of different height via coordinated motion of atoms along close-packed directions. Numerical simulations uncover a transition pathway that involves constriction and expansion of a characteristic stacking fault often associated with grain boundaries in face-centered cubic materials. It is found that local atomic fluctuations by enhanced point defect diffusion may play a critical role in initiating this transition. Our results offer new insights into the collective motion of atoms underlying the lateral advance of steps that control the migration of faceted grain boundaries.

A novel Co@Au structure formed in bimetallic core@shell nanoparticles

Core@shell Co@Au nanoparticles of around 8 nm have been produced by the inert gas condensation method, revealing for the first time that most of the nanoparticles exhibit an icosahedral shape in agreement with the theoretical prediction. Additionally, we report the existence of a novel morphology which consists of a Co icosahedron surrounded by fcc Au facets, reported here for the first time.

Grain-boundary-dependent CO2 electroreduction activity

Uncovering new structure-activity relationships for metal nanoparticle (NP) electrocatalysts is crucial for advancing many energy conversion technologies. Grain boundaries (GBs) could be used to stabilize unique active surfaces, but a quantitative correlation between GBs and catalytic activity has not been established. Here we use vapor deposition to prepare Au NPs on carbon nanotubes (Au/CNT). As deposited, the Au NPs have a relatively high density of GBs that are readily imaged by transmission electron microscopy (TEM); thermal annealing lowers the density in a controlled manner. We show that the surface-area-normalized activity for CO2 reduction is linearly correlated with GB surface density on Au/CNT, demonstrating that GB engineering is a powerful approach to improving the catalytic activity of metal NPs.

Analysis of grain boundary dynamics using event detection and cumulative averaging

To analyze extended time series of high resolution images, we have employed automated frame-by-frame comparisons that are able to detect dynamic changes in the structure of a grain boundary in Au. Using cumulative averaging of images between events allowed high resolution measurements of the atomic relaxation in the interface with sufficient accuracy for comparison with atomistic models. Cumulative averaging was also used to observe the structural rearrangement of atomic columns at a moving step in the grain boundary. The technique of analyzing changing features in high resolution images by averaging between incidents can be used to deconvolute stochastic events that occur at random intervals and on time scales well beyond that accessible to single-shot imaging.

Electroreduction of carbon monoxide to liquid fuel on oxide-derived nanocrystalline copper

The electrochemical conversion of CO2 and H2O into liquid fuel is ideal for high-density renewable energy storage and could provide an incentive for CO2 capture. However, efficient electrocatalysts for reducing CO2 and its derivatives into a desirable fuel are not available at present. Although many catalysts can reduce CO2 to carbon monoxide (CO), liquid fuel synthesis requires that CO is reduced further, using H2O as a H(+) source. Copper (Cu) is the only known material with an appreciable CO electroreduction activity, but in bulk form its efficiency and selectivity for liquid fuel are far too low for practical use. In particular, H2O reduction to H2 outcompetes CO reduction on Cu electrodes unless extreme overpotentials are applied, at which point gaseous hydrocarbons are the major CO reduction products. Here we show that nanocrystalline Cu prepared from Cu2O ('oxide-derived Cu') produces multi-carbon oxygenates (ethanol, acetate and n-propanol) with up to 57% Faraday efficiency at modest potentials (-0.25 volts to -0.5 volts versus the reversible hydrogen electrode) in CO-saturated alkaline H2O. By comparison, when prepared by traditional vapour condensation, Cu nanoparticles with an average crystallite size similar to that of oxide-derived copper produce nearly exclusive H2 (96% Faraday efficiency) under identical conditions. Our results demonstrate the ability to change the intrinsic catalytic properties of Cu for this notoriously difficult reaction by growing interconnected nanocrystallites from the constrained environment of an oxide lattice. The selectivity for oxygenates, with ethanol as the major product, demonstrates the feasibility of a two-step conversion of CO2 to liquid fuel that could be powered by renewable electricity.

Hexagonal close-packed structure of au nanocatalysts solidified after ge nanowire vapor-liquid-solid growth

We report that approximately 10% of the Au catalysts that crystallize at the tips of Ge nanowires following growth have the close-packed hexagonal crystal structure rather than the equilibrium face-centered-cubic structure. Transmission electron microscopy results using aberration-corrected imaging, and diffraction and compositional analyses, confirm the hexagonal phase in these 40-50 nm particles. Reports of hexagonal close packing in Au, even in nanoparticle form, are rare, and the observations suggest metastable pathways for the crystallization process. These results bring new considerations to the stabilization of the liquid eutectic alloy at low temperatures that allows for vapor-liquid-solid growth of high quality, epitaxial Ge nanowires below the eutectic temperature.

Superglide at an internal incommensurate boundary

The intriguing possibility of frictionless gliding of one solid surface on another has been predicted for certain incommensurate interfaces in crystals, based on Aubry's solution to the Frenkel-Kontorova model of a harmonic chain in a periodic potential field. Here we test this prediction for grain boundaries by comparing atomistic simulations with direct experimental observations on the structure and load-deformation behavior of gold nanopillars containing a root-two incommensurate grain boundary. The simulations show supergliding at this boundary limited by finite-size effects which cause edges to act as defects of the incommensurate structure. Structural relaxation at the edges generates stacking faults, dislocations, and asymmetric surface steps. These features as well as the related load-displacement behavior are replicated by experimental observations on the compression of nanopillars using a quantitative nanoindentation device inside a transmission electron microscope. The good agreement between the observed and predicted behavior suggests that incommensurate interfaces could play an important role in the deformation of polycrystalline materials.

Background, status and future of the Transmission Electron Aberration-corrected Microscope project

The strong interaction of electrons with small volumes of matter make them an ideal probe for nanomaterials, but our ability to fully use this signal in electron microscopes remains limited by lens aberrations. To bring this unique advantage to bear on materials research requires a sample space for electron scattering experiments in a tunable electron-optical environment. This is the vision for the Transmission Electron Aberration-corrected Microscope (TEAM) project, which was initiated as a collaborative effort to re-design the electron microscope around aberration-correcting optics. The resulting improvements in spatial, spectral and temporal resolution, the increased space around the sample and the possibility of exotic electron-optical settings will enable new types of experiments. This contribution will give an overview of the TEAM project and its current status, illustrate the performance of the TEAM 0.5 instrument, with highlights from early applications of the machine, and outline future scientific opportunities for aberration-corrected microscopy.

Surface reconstruction and decahedral structure of bimetallic nanoparticles

We report on energetic surface reconstruction phenomena observed on bimetallic nanoparticle systems of AuPd and AuCu, similar to a resolidification effect observed during the cooling process in lead clusters. These binary alloy nanoparticles show the fivefold edges truncated, resulting in [100] facets on decahedral structures, an effect largely envisioned and reported theoretically, with no experimental evidence so far. We demonstrate experimentally as well as by computational simulations that this new eutectic structure is favored in such nanoalloy systems.

Geometric origin of hexagonal close packing at a grain boundary in gold

Using electron microscopy, we identify local, intergranular regions of hexagonal close-packing at a grain boundary in gold. By analyzing the topological defects that connect this layer to the adjacent face-centered cubic grains, we explain the geometric origin of this interfacial reconstruction. We extend this analysis to predict the stacking arrangements found over a range of intergranular misorientations. These results help to unify our understanding of the defects that control the behavior of polycrystalline materials by showing how line defects that are already well understood in the bulk also can determine the atomic arrangements at grain boundaries.