Reoperation rate and implants’ position variation features of displaced femoral neck fractures with sliding compression or length-stable fixation in young and middle-aged population

Single-plane osteotomy model is inaccurate for evaluating the optimal strategy in treating vertical femoral neck fractures: A finite element analysis

BACKGROUND AND OBJECTIVES

The conventional method for simulating vertical femoral neck fractures (vFNFs) is via a vertical single-plane osteotomy (SPO) across the entire femur. However, the accuracy of SPO for evaluating the optimal internal fixation strategy (IFS) and the appropriate assessment parameters is not clear. This study thus aimed to examine the accuracy of SPO in evaluating IFSs and to identify appropriate evaluation parameters using finite element analysis.

METHODS

Eighty patient-specific finite element models were developed based on CT images from eight vFNF patients. The natural fracture model was built using structural features of the affected side, while the SPO was simulated on the healthy side. Five different IFSs were applied to both the natural fracture and SPO groups. Thirteen parameters, including stress, displacement, and stiffness, were subjected to a two-way repeated measures ANOVA to determine the effect of IFSs and fracture morphology on stability. A Pearson correlation analysis was performed on varied parameters with various IFSs to identify independent parameters. Based on these independent parameters, the entropy evaluation method (EEM) score was used to rank the performance of IFSs for each patient.

RESULTS

Eight of the thirteen parameters were significantly influenced by IFSs (p < 0.05), two by fracture morphology (p < 0.01), and none by the interaction between IFS and fracture morphology. In the natural fracture group, parameters including screw stress and displacement, bone cut rate (BCR), and compression effects varied independently with distinct IFSs. In the SPO group, trunk displacement, BCR, cut-out risk, and compression effects parameters changed independently. The BCR of the Alpha strategy was significantly higher than that of the Inverted strategy in the natural fracture group (p = 0.002), whereas the opposite was observed in the SPO group (p = 0.016). Regarding compression effects, two IFS pairings in the natural fracture group and seven IFS pairings in the SPO group exhibited significant differences. None of the five IFSs achieved the optimal EEM score for each patient.

CONCLUSIONS

The single-plane osteotomy model may have limitations in assessing IFSs, particularly when the bone cut rate and compression effects are the main influencing factors. Parameters of the screw stress and displacement, BCR, and compression effects appear to be relevant in evaluating IFSs for natural fracture models. It indicates that individualized natural fracture models could provide more comprehensive insights for determining the optimal IFS in treating vFNFs.

Bio-mechanical effects of femoral neck system versus cannulated screws on treating young patients with Pauwels type III femoral neck fractures: a finite element analysis

INTRODUCTION

As a novel internal fixation for femoral neck fractures, the femoral neck system has some advantages for young Pauwels type III femoral neck fractures without clear biomechanical effects and mechanisms. Thus, the objection of the study is to realize the biomechanical effects and mechanism of FNS cannulated screws on treating young patients with Pauwels type III femoral neck fractures compared to cannulated screws which are commonly used for femoral neck fractures by finite element analysis.

METHODS

Firstly, the model of young Pauwels type III femoral neck fractures, femoral neck system (FNS), and three cannulated screws (CS) arranged in an inverted triangle were established, and the internal fixations were set up to fix young Pauwels type III femoral neck fractures. Under 2100 N load, the finite element was performed, and the deformation, peak von Mises stress (VMS), and contact at fracture segments were recorded to analyze the biomechanical effects and mechanism of FNS and three-CS fixing young Pauwels type III femoral neck fractures.

RESULTS

Compared to three-CS, the deformation of the whole model, internal fixation, and fracture segments after FNS fixation were lower, and the peak VMS of the whole model and the internal fixation after FNS were higher with lower peak VMS of the distal femur and the fracture segments. With a sticking contact status, the contact pressure at fracture segments after FNS fixation was lower than that of three-CS.

CONCLUSIONS

FNS can provide better mechanical effects for young patients with Pauwels type III femoral neck fractures, which may be the mechanical mechanism of the clinical effects of FNS on femoral neck fracture. Although there is high stress on FNS, it is still an effective and safe internal fixation for young patients with Pauwels type III femoral neck fractures.