Polystyrene sulfonate is effective for enhancing biomass enzymatic saccharification under green liquor pretreatment in bioenergy poplar

High throughput disassembly of cellulose nanoribbons and colloidal stabilization of gel-like Pickering emulsions

We introduce a strategy to disintegrate cellulose microfibrils present in the cell walls of plant fibers. The process includes impregnation and mild oxidation followed by ultrasonication, which loosens the hydrophilic planes of crystalline cellulose while preserving the hydrophobic ones. The resultant molecularly-sized cellulose structures (cellulose ribbons, CR) retain a length of the order of a micron (1.47 ± 0.48 μm, AFM). A very high axial aspect ratio is determined (at least 190), considering the CR height (0.62 ± 0.38 nm, AFM), corresponding to 1-2 cellulose chains, and width (7.64 ± 1.82 nm, TEM). The new molecularly-thin cellulose proposes excellent hydrophilicity and flexibility, enabling a remarkable viscosifying effect when dispersed in aqueous media (shear-thinning, zero shear viscosity of 6.3 × 10⁵ mPa·s). As such, CR suspensions readily develop into gel-like Pickering emulsions in the absence of crosslinking, suitable for direct ink writing at ultra-low solids content.

Comparative study of acid- and alkali-catalyzed 1,4-butanediol pretreatment for co-production of fermentable sugars and value-added lignin compounds

BACKGROUND

Organosolv pretreatment is one of the most efficient methods for delignification and boosting biomass saccharification. As compared to typical ethanol organosolv pretreatments, 1,4-butanediol (BDO) organosolv pretreatment is a high-boiling-point solvent pretreatment, which can generate low pressure in the reactor during high temperature cooking that improves the operation safety. Although several studies showed that organosolv pretreatment can lead to effective delignification and enhancement in glucan hydrolysis, there has been no studies on acid- and alkali-catalyzed BDO pretreatment, as well as their comparison on promoting biomass saccharification and lignin utilization.

RESULTS

It was shown that BDO organosolv pretreatment was more effective in removing lignin from poplar as compared with typical ethanol organosolv pretreatment under the same pretreatment conditions. HCl-BDO pretreatment with 40 mM acid loading led to 82.04% of original lignin removed from biomass, as compared to the lignin removal of 59.66% in HCl-Ethanol pretreatment. Besides, acid-catalyzed BDO pretreatment was more effective in improving the enzymatic digestibility of poplar than alkali-catalyzed BDO pretreatment. As a result, HCl-BDO with acid loading of 40 mM provided a good enzymatic digestibility of cellulose (91.16%) and the maximum sugar yield of 79.41% from original woody biomass. The linear correlations between physicochemical structure (e.g., fiber swelling, cellulose crystallinity, crystallite size, surface lignin coverage and cellulose accessibility) changes of BDO pretreated poplar and enzymatic hydrolysis were plotted to figure out the main factors that influenced biomass saccharification. Moreover, acid-catalyzed BDO pretreatment mainly brought about the phenolic hydroxyl (PhOH) groups formation in lignin structure, while alkali-catalyzed BDO pretreatment mostly led to the lower molecular weight of lignin.

CONCLUSIONS

Results indicated that the acid-catalyzed BDO organosolv pretreatment could significantly improve enzymatic digestibility of the highly recalcitrant woody biomass. The great enzymatic hydrolysis of glucan resulted from increased cellulose accessibility, which mostly associated with the higher degree of delignification and hemicellulose solubilization, as well as the more increase in fiber swelling. Besides, lignin was recovered from the organic solvent, which could be used as natural antioxidants. The formation of phenolic hydroxyl groups in lignin structure and the lower molecular weight of lignin contributed to its greater radical scavenging capacity.

Enhanced hybrid hydrogel based on wheat husk lignin-rich nanocellulose for effective dye removal

Polyvinyl alcohol (PVA) hydrogels were enhanced mechanically through the addition of lignin-rich nanocellulose (LCN), soluble ash (SA) and montmorillonite (MMT) for dye removal. The hybrid hydrogels reinforced with 33.3 wt% of LCN had a 163.0% increase in storage modulus as compared to the PVA/0LCN-33.3SM hydrogel. LCN can be added to the PVA hydrogel to alter its rheological properties. Additionally, hybrid hydrogels were highly efficient in removing methylene blue from wastewater, which was attributed to the synergistic effects of the PVA matrix supporting embedded LCN, MMT, and SA. The adsorption time (0–90 min) showed that the hydrogels containing MMT and SA had high removal efficiency, and the adsorption of methylene blue (MB) by PVA/20LCN-13.3SM was greater than 95.7% at 30°C. It was found that MB efficiency decreased with a high MMT and SA content. Our study provided a new method for the fabrication of polymers-based eco-friendly, low-cost and robust physical hydrogels for the MB removal.

Overexpression of PtoMYB115 improves lignocellulose recalcitrance to enhance biomass digestibility and bioethanol yield by specifically regulating lignin biosynthesis in transgenic poplar

Background

Woody plants provide the most abundant biomass resource that is convertible for biofuels. Since lignin is a crucial recalcitrant factor against lignocellulose hydrolysis, genetic engineering of lignin biosynthesis is considered as a promising solution. Many MYB transcription factors have been identified to involve in the regulation of cell wall formation or phenylpropanoid pathway. In a previous study, we identified that PtoMYB115 contributes to the regulation of proanthocyanidin pathway, however, little is known about its role in lignocellulose biosynthesis and biomass saccharification in poplar.

Results

Here, we detected the changes of cell wall features and examined biomass enzymatic saccharification for bioethanol production under various chemical pretreatments in PtoMYB115 transgenic plants. We reported that PtoMYB115 might specifically regulate lignin biosynthesis to affect xylem development. Overexpression of PtoMYB115 altered lignin biosynthetic gene expression, resulting in reduced lignin deposition, raised S/G and beta-O-4 linkage, resulting in a significant reduction in cellulase adsorption with lignin and an increment in cellulose accessibility. These alterations consequently improved lignocellulose recalcitrance for significantly enhanced biomass saccharification and bioethanol yield in the PtoMYB115-OE transgenic lines. In contrast, the knockout of PtoMYB115 by CRISPR/Cas9 showed reduced woody utilization under various chemical pretreatments.

Conclusions

This study shows that PtoMYB115 plays an important role in specifically regulating lignin biosynthesis and improving lignocellulose features. The enhanced biomass saccharification and bioethanol yield in the PtoMYB115-OE lines suggests that PtoMYB115 is a candidate gene for genetic modification to facilitate the utilization of biomass.

Enzymatic saccharification promotion for bioenergy poplar under green liquor pretreatment by fully sulfonated polystyrene: Effect of molecular weight

Water-soluble lignin and lignin derivatives are cited to promote the enzymatic saccharification of lignocellulose. Herein, a series of fully sulfonated polystyrene sulfonates (FSPSSs) with various molecular weights (MW) were synthesized through free radical polymerization (FRP) and atom transfer radical polymerization (ATRP) to serve as lignin analogues to boost the enzymatic saccharification of bioenergy poplar under green liquor pretreatment. The FRP-made polymers with MW 944.5 × 10³ to 123.6 × 10³ g/mol increased the enzymatic hydrolysis digestibility (SED) by 13 % to 18.8 %. On contrary, the ATRP-made polymers with lower MW (3.8 × 10³-12.2 × 10³ g/mol) showed a weak effect with<8 % improvement in SED. This can be explained the adsorption capacity and the conformation of cellulase-FSPSS complexes, which respond to the reducing nonproductive adsorption correlated to their MWs, due to the strong dependence of molecular conformation on the chain length of strong polyelectrolytes.