Improving Cleaning and Disinfection of High-Touch Surfaces in Intensive Care during Carbapenem-Resistant Acinetobacter baumannii Endemo-Epidemic Situations

Environmental contamination across multiple hospital departments with multidrug-resistant bacteria pose an elevated risk of healthcare-associated infections in Kenyan hospitals

BACKGROUND

Healthcare-associated infections (HAIs) are often caused by multidrug-resistant (MDR) bacteria contaminating hospital environments which can cause outbreaks as well as sporadic transmission.

METHODS

This study systematically sampled and utilized standard bacteriological culture methods to determine the numbers and types of MDR Enterococcus faecalis/faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter species, and Escherichia coli (ESKAPEE) from high-touch environments of five Kenyan hospitals; level 6 and 5 hospitals (A, B, and C), and level 4 hospitals (D and E), in 2018. Six hundred and seventeen high-touch surfaces across six hospital departments; surgical, general, maternity, newborn, outpatient and pediatric were sampled.

RESULTS

78/617 (12.6%) of the sampled high-touch surfaces were contaminated with MDR ESKAPEE; A. baumannii, 23/617 (3.7%), K. pneumoniae, 22/617 (3.6%), Enterobacter species, 19/617 (3.1%), methicillin resistant S. aureus (MRSA), 5/617 (0.8%), E. coli, 5/617 (0.8%), P. aeruginosa, 2/617 (0.3%), and E. faecalis and faecium, 2/617 (0.3%). Items found in patient areas, such as beddings, newborn incubators, baby cots, and sinks were the most frequently contaminated. Level 6 and 5 hospitals, B, 21/122 (17.2%), A, 21/122 (17.2%), and C, 18/136 (13.2%), were more frequently contaminated with MDR ESKAPEE than level 4 hospitals; D, 6/101 (5.9%), and E, 8/131 (6.1%). All the sampled hospital departments were contaminated with MDR ESKAPEE, with high levels observed in newborn, surgical and maternity. All the A. baumannii, Enterobacter species, and K. pneumoniae isolates were non-susceptible to piperacillin, ceftriaxone and cefepime. 22/23 (95.6%) of the A. baumannii isolates were non-susceptible to meropenem. In addition, 5 K. pneumoniae isolates were resistant to all the antibiotics tested except for colistin.

CONCLUSION

The presence of MDR ESKAPEE across all the hospitals demonstrated gaps in infection prevention practices (IPCs) that should be addressed. Non-susceptibility to last-line antibiotics such as meropenem threatens the ability to treat infections.

The efficiency of cleaning in intensive care units: A systematic review

OBJECTIVES

This review aims to analyze the studies on cleaning practices and the efficiency of the cleaning carried out in environments that have a great risk of resistant microorganism infection, such as intensive care units.

METHODS

In this study, a retrospective literature review was undertaken of the relevant publications between the years 2005 and 2020, using the keywords "Cross Infection, Infection Control, Multidrug-Resistant Bacteria, Intensive Care, Room Cleaning, Environmental Cleaning, Hospital-Associated Infection"; using the international databases Pubmed, CINAHL and EBSCO and domestic database ULAKBIM on search engines. Titles and abstracts of all relevant articles found on electronic searches were reviewed by the researchers independently. The Preferred Reporting Items for Systematic Review and Meta-Analysis Protocols guideline and Patient, Intervention, Comparison, Outcomes, Study design model were used in analysing the studies.

RESULTS

The selected studies were reviewed in four main categories: Materials used in cleaning, the period between taking environmental samples, cleaning methods, and the efficiency of cleaning. Among the studies included herein, eight were randomized controlled trials, three were retrospective intervention studies, two were case-control studies and one was a retrospective cohort study.

CONCLUSIONS

Today, the assessment of cleaning in environments can be evaluated by different methods, but there are advantages and disadvantages of these methods. Therefore, in the relevant literature, it is suggested that cleaning must be evaluated by several methods, not only one. Also, training the staff that carries out the cleaning and rewarding correct behavior by giving feedback are important approaches to increase the efficiency of cleaning. It is suggested that cleaning must be carried out every day, regularly with effective methods and equipment; frequency of cleaning during epidemics must be increased, institutions must prepare cleaning manuals according to evidence-based guidelines that are recognized at an international level.

Evidence Map and Systematic Review of Disinfection Efficacy on Environmental Surfaces in Healthcare Facilities

Healthcare-associated infections (HAIs) contribute to patient morbidity and mortality with an estimated 1.7 million infections and 99,000 deaths costing USD $28-34 billion annually in the United States alone. There is little understanding as to if current environmental surface disinfection practices reduce pathogen load, and subsequently HAIs, in critical care settings. This evidence map includes a systematic review on the efficacy of disinfecting environmental surfaces in healthcare facilities. We screened 17,064 abstracts, 635 full texts, and included 181 articles for data extraction and study quality assessment. We reviewed ten disinfectant types and compared disinfectants with respect to study design, outcome organism, and fourteen indictors of study quality. We found important areas for improvement and gaps in the research related to study design, implementation, and analysis. Implementation of disinfection, a determinant of disinfection outcomes, was not measured in most studies and few studies assessed fungi or viruses. Assessing and comparing disinfection efficacy was impeded by study heterogeneity; however, we catalogued the outcomes and results for each disinfection type. We concluded that guidelines for disinfectant use are primarily based on laboratory data rather than a systematic review of in situ disinfection efficacy. It is critically important for practitioners and researchers to consider system-level efficacy and not just the efficacy of the disinfectant.

The efficiency of cleaning in intensive care units: A systematic review

OBJECTIVES

This review aims to analyze the studies on cleaning practices and the efficiency of the cleaning carried out in environments that have a great risk of resistant microorganism infection, such as intensive care units.

METHODS

In this study, a retrospective literature review was undertaken of the relevant publications between the years 2005 and 2020, using the keywords "Cross Infection, Infection Control, Multidrug-Resistant Bacteria, Intensive Care, Room Cleaning, Environmental Cleaning, Hospital-Associated Infection"; using the international databases Pubmed, CINAHL and EBSCO and domestic database ULAKBIM on search engines. Titles and abstracts of all relevant articles found on electronic searches were reviewed by the researchers independently. The Preferred Reporting Items for Systematic Review and Meta-Analysis Protocols guideline and Patient, Intervention, Comparison, Outcomes, Study design model were used in analysing the studies.

RESULTS

The selected studies were reviewed in four main categories: Materials used in cleaning, the period between taking environmental samples, cleaning methods, and the efficiency of cleaning. Among the studies included herein, eight were randomized controlled trials, three were retrospective intervention studies, two were case-control studies and one was a retrospective cohort study.

CONCLUSIONS

Today, the assessment of cleaning in environments can be evaluated by different methods, but there are advantages and disadvantages of these methods. Therefore, in the relevant literature, it is suggested that cleaning must be evaluated by several methods, not only one. Also, training the staff that carries out the cleaning and rewarding correct behavior by giving feedback are important approaches to increase the efficiency of cleaning. It is suggested that cleaning must be carried out every day, regularly with effective methods and equipment; frequency of cleaning during epidemics must be increased, institutions must prepare cleaning manuals according to evidence-based guidelines that are recognized at an international level.

Antibacterial activity testing methods for hydrophobic patterned surfaces

One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to be the best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces.

Practical recommendations for routine cleaning and disinfection procedures in healthcare institutions: a narrative review

Healthcare-associated infections (HAIs) are the most common adverse outcomes due to delivery of medical care. HAIs increase morbidity and mortality, prolong hospital stay, and are associated with additional healthcare costs. Contaminated surfaces, particularly those that are touched frequently, act as reservoirs for pathogens and contribute towards pathogen transmission. Therefore, healthcare hygiene requires a comprehensive approach whereby different strategies may be implemented together, next to targeted, risk-based approaches, in order to reduce the risk of HAIs for patients. This approach includes hand hygiene in conjunction with environmental cleaning and disinfection of surfaces and clinical equipment. This review focuses on routine environmental cleaning and disinfection including areas with a moderate risk of contamination, such as general wards. As scientific evidence has not yet resulted in universally accepted guidelines nor led to universally accepted practical recommendations pertaining to surface cleaning and disinfection, this review provides expert guidance for healthcare workers in their daily practice. It also covers outbreak situations and suggests practical guidance for clinically relevant pathogens. Key elements of environmental cleaning and disinfection, including a fundamental clinical risk assessment, choice of appropriate disinfectants and cleaning equipment, definitions for standardized cleaning processes and the relevance of structured training, are reviewed in detail with a focus on practical topics and implementation.

A novel methodology to study antimicrobial properties of high-touch surfaces used for indoor hygiene applications-A study on Cu metal

Metal-based high-touch surfaces used for indoor applications such as doorknobs, light switches, handles and desks need to remain their antimicrobial properties even when tarnished or degraded. A novel laboratory methodology of relevance for indoor atmospheric conditions and fingerprint contact has therefore been elaborated for combined studies of both tarnishing/corrosion and antimicrobial properties of such high-touch surfaces. Cu metal was used as a benchmark material. The protocol includes pre-tarnishing/corrosion of the high touch surface for different time periods in a climatic chamber at repeated dry/wet conditions and artificial sweat deposition followed by the introduction of bacteria onto the surfaces via artificial sweat droplets. This methodology provides a more realistic and reproducible approach compared with other reported procedures to determine the antimicrobial efficiency of high-touch surfaces. It provides further a possibility to link the antimicrobial characteristics to physical and chemical properties such as surface composition, chemical reactivity, tarnishing/corrosion, surface roughness and surface wettability. The results elucidate that bacteria interactions as well as differences in extent of tarnishing can alter the physical properties (e.g. surface wettability, surface roughness) as well as the extent of metal release. The results clearly elucidate the importance to consider changes in chemical and physical properties of indoor hygiene surfaces when assessing their antimicrobial properties.

A review of wipes used to disinfect hard surfaces in health care facilities

BACKGROUND

Despite a plethora of wipes available for use in health care facilities, there is a paucity of articles describing wipe composition, potential interactions between wipes and disinfectants, the manner in which wipes are used, and their relative efficacy. The purpose of this article is to provide an in-depth review of wipes used for disinfection of hard surfaces in health care settings.

METHODS

Comprehensive searches of the Pubmed database and Internet were conducted, and articles published from 1953 through September 2019 and pertinent on-line documents were reviewed. Bibliographies of relevant articles were reviewed.

RESULTS

Wipes vary considerably in their composition, and the disinfectants with which they are used. With reusable dry wipes, the ratio of wipe material to disinfectant and the amount of disinfectant absorbed by the wipe and delivered to surfaces is difficult to standardize, which may affect their efficacy. The manner in which wipes are used by health care personnel is highly variable, due in part to insufficient instructions for use and inadequate education of relevant personnel.

CONCLUSIONS

Additional research is needed regarding the best practices for using different types of wipes, improved methods for educating staff, and establishing the relative efficacy of wipes in reducing environmental contamination and health care-associated infections.

A Pan-Canadian narrative review on the protocols for reopening dental services during the COVID-19 pandemic

The current coronavirus disease 2019 (COVID-19) pandemic is impacting the way in which dental services are provided. The aim of this narrative review was twofold: to summarize key areas from the Canadian protocols available for the reopening and restructuring of dental services across the country and to critically review these protocols based on existing evidence. A narrative review of the existing Canadian protocols, written in English and French, was undertaken between April 15 and July 13, 2020. The protocols were obtained by searching through regulatory bodies and websites from professional organizations, and from personal contacts through academic institutions and policy leaders. The data extraction form focused only on protocols related to dentistry, and the information was compiled by a hired assistant. Content was categorized via group discussions with the research team on eight areas: office management and procedures, patient and staff screening, treatment procedures, office layout, risk reduction, personal protective equipment, supporting information, and length and readability. Thirteen protocols were identified and offered substantial variation in the level of details provided. All but two protocols specified proper donning/doffing of personal protective equipment, while all protocols recommended daily monitoring of COVID-19 related signs and symptoms in staff and patients. They varied in terms of recommended mask types, eye and face shield protection, and head coverings. While all protocols aimed at restructuring emergency dental services, their recommendations were often not based on the published evidence. This narrative review summarized key areas from 13 provincial and territorial protocols in Canada to help oral health care providers plan the reopening of their services. The information conveyed across all documents was clear, but variance highlights the need for a coordinated effort to develop an evidence-based document for dental practitioners.

Successful Incidences of Controlling Multidrug-Resistant, Extensively Drug-Resistant, and Nosocomial Infection Acinetobacter baumannii Using Antibiotic Stewardship, Infection Control Programs, and Environmental Cleaning at a Chinese University Hospital

Objective

We estimated the efficacy of antimicrobial stewardship (AMS), infection control programs (ICP), and environmental cleaning (ENC) for controlling the resistance of Acinetobacter baumannii (AB) and controlling the incidence of multidrug-resistant AB (MDRAB), extensively drug-resistant AB (XDRAB), and nosocomial infection AB in the ICU (NIAB-ICU) at a university hospital.

Methods

The intervention included 4-year AMS+ICP and 3-year AMS+ICP+ENC between January 2012 and December 2019.

Results

A total of 2636 AB isolates were collected totally, and 64.98% of AB isolates were MDR and 29.97% were XDR. Preintervention and postintervention incidences of MDRAB, XDRAB, and NIAB-ICU by AMS+ICP measures ranged from 84.96% to 71.98%, 41.96% to 33.13%, and 45.6% to 38%, respectively. However, all of them were not statistically changed (P=0.085, 0.072, 0.061, separately). The preintervention and postintervention incidences of MDRAB, XDRAB, and NIAB-ICU by AMS+ICP+ENC measures ranged from 71.98% to 36.55%, 33.13% to 19.88%, and 38% to 22.5%, respectively. Statistically significant declines were observed (P=0.016, 0.041, 0.032, separately). The defined daily doses (DDD) per 1000 patient-days (PD) decreased from 45±3.3 to 30.81±1.5 per 1000 PD across from 2012 to 2019, and a statistical decline was seen (P=0.01). Concurrently, the alcohol-based hand gel (ABHG) consumption per 1000 PD increased from 0.6±0.05 L to 12.5±2.3 L per 1000 PD, and a statistical increase was observed (P=0.0001). A statistically positive correlation was revealed between the DDD and incidence of MDRAB, XDRAB, and NIAB-ICU (r=0.905 and p=0.002; r=0.939 and p=0.001; r=0.956 and p=0.0002; respectively). Simultaneously, a statistically negative correlation was showed between the ABHG and incidence of MDRAB, XDRAB, and NIAB-ICU (r=-0.858 and p=0.006; r=-0.888 and p=0.003; r=-0.882 and p=0.004, separately).

Conclusion

The AMS, ICP, and ENC may be one of the most effective and best measures to address the increasing incidence of MDRAB, XDRAB, and NIAB-ICU currently.

Genetic Diversity of Imipenem-Resistant Acinetobacter baumannii Infections at an Intensive Care Unit

Introduction. Imipenem-resistant Acinetobacter baumannii (IRAB) represents a major clinical threat. Dissemination in critical care areas necessitates effective action measures including genotyping tools to study the clonality of these strains and trace their origin. The main aim of this study is to assess the genetic relatedness between IRAB isolates in our institution intensive care units (ICU) which are at a particular risk of outbreaks.

Can environmental contamination be explained by particular traits associated with patients?

BACKGROUND

Little is known about patient risk factors associated with environmental contamination.

AIM

To evaluate the rate of environmental contamination and to investigate individual risk factors.

METHODS

A prospective cohort study was conducted. Each day, five rooms occupied by patients were selected. Five critical surfaces were systematically swabbed twice a day before and after cleaning. Clinical characteristics of all patients were collected. Logisitic regression was performed to evaluate the association between environmental contamination and patients' characteristics.

FINDINGS

A total of 107 consecutive patients were included and 1052 environmental samples were performed. Nineteen (18%) patients were known previously colonized/infected with a multidrug-resistant organism (MDRO). Respectively, 723 (69%) and 112 (11%) samples grew with ≥1 and >2.5 cfu/cm² bacteria, resulting in 62 (58%) contaminated rooms. Considering positive samples with at least one pathogenic bacterium, 16 (15%) rooms were contaminated. By univariate and multivariate analysis, no variables analysed were associated with the environmental contamination. Considering contaminated rooms with >2.5 cfu/cm², three factors were protective for environmental contamination: known MDRO carriers/infected patients (odds ratio: 0.25; 95% confidence interval: 0.09-0.72; P = 0.01), patients with urinary catheter (0.19; 0.04-0.89; P = 0.03) and hospitalization in single room (0.3; 0.15-0.6; P < 0.001).

CONCLUSION

This study was conducted in a non-outbreak situation and showed a low rate of environmental contamination with pathogenic bacteria. Only 11% of environmental samples grew with >2.5 cfu/cm², and they were related to non-pathogenic bacteria. No risk factors associated with environmental contamination were identified.

Colorimetric Detection of Aliphatic Alcohols in β-Cyclodextrin Solutions

The sensitive, selective, and practical detection of aliphatic alcohols is a continuing technical challenge with significant impact in public health research and environmental remediation efforts. Reported herein is the use of a β-cyclodextrin derivative to promote proximity-induced interactions between aliphatic alcohol analytes and a brightly colored organic dye, which resulted in highly analyte-specific color changes that enabled accurate alcohol identification. Linear discriminant analysis of the color changes enabled 100% differentiation of the colorimetric signals obtained from methanol, ethanol, and isopropanol in combination with BODIPY and Rhodamine dyes. The resulting solution-state detection system has significant broad-based applicability because it uses only easily available materials to achieve such detection with moderate limits of detection obtained. Future research with this sensor system will focus on decreasing limits of detection as well as on optimizing the system for quantitative detection applications.

Evaluation of an Ultraviolet C (UVC) Light-Emitting Device for Disinfection of High Touch Surfaces in Hospital Critical Areas

Implementation of environmental cleaning and disinfection has been shown to reduce the incidences of healthcare-associated infections. The effect of an enhanced strategy for terminal room disinfection, applying the pulsed xenon-based ultraviolet light no-touch disinfection systems (PX-UVC) after the current standard operating protocol (SOP) was evaluated. In a teaching hospital, the effectiveness in reducing the total bacterial count (TBC) and in eliminating high-concern microorganisms was assessed on five high-touch surfaces in different critical areas, immediately pre- and post-cleaning and disinfection procedures (345 sampling sites). PX-UVC showed only 18% (15/85) of positive samples after treatment compared to 63% (72/115) after SOP. The effectiveness of PX-UVC was also observed in the absence of manual cleaning and application of a chemical disinfectant. According to the hygienic standards proposed by the Italian Workers Compensation Authority, 9 of 80 (11%) surfaces in operating rooms showed TBC ≥15 CFU/24 cm² after the SOP, while all samples were compliant applying the SOP plus PX-UVC disinfection. Clostridium difficile (CD) spores and Klebsiella pneumoniae (KPC) were isolated only after the SOP. The implementation of the standard cleaning and disinfection procedure with the integration of the PX-UVC treatment had effective results in both the reduction of hygiene failures and in control environmental contamination by high-concern microorganisms.