Polyurethane Impregnation for Improving the Mechanical and the Water Resistance of Polypropylene-Based Textiles

A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route

The transition from conventional polyurethane (PU) to non isocyanate polyurethane (NIPU) is driven mainly by safety concerns, environmental considerations, and sustainability issues associated with the current PU technology. NIPU has emerged as a promising alternative, addressing limitations related to traditional PU production. There has been increasing interest in bio-based NIPU aligning with the aspiration for green materials and processes. One important biomass resource for the development of bio-based NIPU is vegetable oil, an abundant, renewable, and relatively low cost feedstock. As such, this review aims to provide insight into the progression of NIPU derived from vegetable oils. This article highlights the synthetic and green approach to NIPU production, emphasizing the method involving the polyaddition reaction of cyclic carbonates and amines. The review includes case studies on vegetable oil-based NIPU and perspectives on their properties. Further, discussions on the potential applications and commercial importance of PU and NIPU are included. Finally, we offer perspectives on possible research directions and the future prospects of NIPU, contributing to the ongoing evolution of PU technology.

Puncture Resistance and UV aging of Nanoparticle-Loaded Waterborne Polyurethane-Coated Polyester Textiles

The goal of this research was to investigate the effect of different types of nanoparticles on the UV weathering resistance of polyurethane (PU) treatment in polyester-based fabrics. In this regard, zinc oxide nanoparticles (ZnO), hydrophilic silica nanoparticles (SiO2 (200)), hydrophobic silica nanoparticles (SiO2 (R812)), and carbon nanotubes (CNT) were mixed into a waterborne polyurethane dispersion and impregnated into textile samples. The puncturing resistance of the developed specimens was examined before and after UV-accelerated aging. The changes in chemical structure and surface appearance in nanoparticle-containing systems and after UV treatments were documented using microscopic pictures and infrared spectroscopy (in attenuated total reflectance mode). Polyurethane impregnation significantly enhanced the puncturing strength of the neat fabric and reduced the textile's ability to be deformed. However, after UV aging, mechanical performance was reduced both in the neat and PU-impregnated specimens. After UV treatment, the average puncture strength of all nanoparticle-containing systems was always greater than that of aged fabrics impregnated with PU alone. In all cases, infrared spectroscopy revealed some slight differences in the absorbance intensity of characteristic peaks for polyurethane polymer in specimens before and after UV rays, which could be related to probable degradation effects.

The Influence of Diisocyanate Structure on Thermal Stability of Thermoplastic Polyurethane Elastomers Based on Diphenylmethane-Derivative Chain Extender with Sulfur Atoms

The work is a continuation of the research on thermoplastic polyurethane (TPU) elastomers containing sulfur atoms which are incorporated into the polyurethane chain using aliphatic-aromatic chain extenders. These materials show some improved properties in relation to conventional ones, e.g., adhesion to metals, bacterial resistance and refractive index. The present study deals with the detailed characteristics of the process of thermal decomposition of TPU elastomers obtained from 2,2'-[methylenebis(1,4-phenylenemethylenethio)]diethanol, 1,1'-methanediylbis(4-isocyanatobenzene) (MDI) or 1,6-diisocyanatohexane (HDI) and poly(oxytetramethylene) diol of M_n = 2000 g/mol by thermogravimetric analysis coupled on-line with Fourier transform infrared spectroscopy. The analysis was performed under inert and oxidative conditions. All TPU elastomers were found to have a relatively good thermal stability, with those based on aromatic diisocyanate being at an advantage. In helium, they are stable up to 280-282 °C (from HDI) and 299-301 °C (from MDI), whereas in synthetic air up to 252-265 °C (from HDI) and 261-272 °C (from MDI), as measured by the temperature of 1% mass loss. Depending on the content of the hard segments and the tested atmosphere, the TPU elastomers decompose from one to four stages. From the analysis of the volatile decomposition products, it follows that the decomposition of both types of hard segments was accompanied by the evolution of carbonyl sulfide, carbon dioxide, water, sulfide dioxide, alcohols and aromatic compounds. For the hard segment derived from HDI, isocyanates, amines, and unsaturated compounds were also identified, while for the MDI-derived one, aldehydes were discovered. In turn, the polyether soft segment decomposed mainly into aliphatic ethers, aldehydes, and carbon monoxide.

Synthesis and Characterization of New Polycarbonate-Based Poly(thiourethane-urethane)s

The new segmented poly(thiourethane-urethane)s (PTURs) based on 1,1′-methanediylbis(4-isocyanatocyclohexane) (HMDI, Desmodur W^®), polycarbonate diol (PCD, Desmophen C2200) and (methanediyldibenzene-4,1-diyl)dimethanethiol were synthesized by one-step melt polyaddition method. The obtained PTURs, with a content of 30–60 wt% of the hard segments (HS), were tested in which the influence of changes in the HS content on their properties was determined. The polymers were characterized by Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), thermal analysis (DSC, TGA) and thermomechanical analysis (DMTA). Additionally, tensile strength, optical (refractive index, UV-VIS and color) and surface properties of the obtained polymers (contact angle and surface free energy) and adhesion to copper were examined. FTIR analysis verified the supposed structure of the polymers obtained and showed a complete conversion of the isocyanate groups. TGA analysis confirmed the relatively good thermal stability of the polymers. On the other hand, after performing the DSC analysis, it was possible to state that the obtained materials were partially or completely amorphous, and the microphase separation decreased with increasing HS content in the polymer. Similar observations were made from the DMTA data. In addition, the hardness, tensile strength, modulus of elasticity, storage modulus, adhesion to copper, refractive index and total free surface energy increased with increasing HS content in the polymer.

Towards the Sustainability of the Plastic Industry through Biopolymers: Properties and Potential Applications to the Textiles World

This study aims to provide an overview of the latest research studies on the use of biopolymers in various textile processes, from spinning processes to dyeing and finishing treatment, proposed as a possible solution to reduce the environmental impact of the textile industry. Recently, awareness of various polluting aspects of textile production, based on petroleum derivatives, has grown significantly. Environmental issues resulting from greenhouse gas emissions, and waste accumulation in nature and landfills, have pushed research activities toward more sustainable, low-impact alternatives. Polymers derived from renewable resources and/or with biodegradable characteristics were investigated as follows: (i) as constituent materials in yarn production, in view of their superior ability to be decomposed compared with common synthetic petroleum-derived plastics, positive antibacterial activities, good breathability, and mechanical properties; (ii) in textile finishing to act as biological catalysts; (iii) to impart specific functional properties to treated textiles; (iv) in 3D printing technologies on fabric surfaces to replace traditionally more pollutive dye-based and inkjet printing; and (v) in the implants for the treatment of dye-contaminated water. Finally, current projects led by well-known companies on the development of new materials for the textile market are presented.