Graphene Infused Ecological Polymer Composites for Electromagnetic Interference Shielding and Heat Management Applications

Recent Advances in Limiting Fatigue Damage Accumulation Induced by Self-Heating in Polymer-Matrix Composites

The self-heating effect can be considered as a catastrophic phenomenon that occurs in polymers and polymer-matrix composites (PMCs) subjected to fatigue loading or vibrations. This phenomenon appears in the form of temperature growth in such structures due to their relatively low thermal conductivities. The appearance of thermal stress resulting from temperature growth and the coefficient of thermal expansion (CTE) mismatch between fibers and neighboring polymer matrix initiates and/or accelerates structural degradation and consequently provokes sudden fatigue failure in the structures. Therefore, it is of primary significance for a number of practical applications to first characterize the degradation mechanism at the nano-, micro- and macroscales caused by the self-heating phenomenon and then minimize it through the implementation of numerous approaches. One viable solution is to cool the surfaces of considered structures using various cooling scenarios, such as environmental and operational factors, linked with convection, contributing to enhancing heat removal through convection. Furthermore, if materials are appropriately selected regarding their thermomechanical properties involving thermal conductivity, structural degradation may be prevented or at least minimized. This article presents a benchmarking survey of the conducted research studies associated with the fatigue performance of cyclically loaded PMC structures and an analysis of possible solutions to avoid structural degradation caused by the self-heating effect.

Modeling of Electrical Conductivity for Graphene-Filled Products Assuming Interphase, Tunneling Effect, and Filler Agglomeration Optimizing Breast Cancer Biosensors

In this study, the percolation inception, actual filler amount, and concentration of nets are expressed using the filler size and agglomeration, interphase depth, and tunneling size. A modified form of the power-law model is recommended for the conductivity of graphene-polymer products using the mentioned characteristics. The modified model is used to plot and evaluate the conductivity at dissimilar ranges of factors. In addition, the prediction results of the model are compared with the experimented values of several samples. A low percolation inception and high-volume portion of nets that improve the conductivity of nanoparticles are achieved at a low agglomeration extent, thick interphase, large aspect ratio of the nanosheets, and large tunnels. The developed equation for percolation inception accurately predicts the results assuming tunneling and interphase parts. The innovative model predicts the conductivity for the samples, demonstrating good agreement with the experimented values. This model is appropriate to improve breast cancer biosensors, because conductivity plays a key role in sensing.

Analysis of Electromagnetic Shielding Properties of a Material Developed Based on Silver-Coated Copper Core-Shell Spraying

This study proposes an electromagnetic shielding material sprayed with silver-coated copper powder (core-shell powder). The shielding properties of the material are analyzed in details section. Cross-sectional observation and sheet resistance measurement were used to determine the thickness and electrical conductivity of the electromagnetic shielding layer, which was generated by spray-coating; this aided in confirming the uniformity of the coating film. The results indicate that the electromagnetic interference shielding effectiveness increases when the silver-coated copper paste (core-shell paste) is used as the coating material rather than the conventional aluminum base. The proposed material can be used in various frequency ranges owing to the excellent shielding effectiveness of the core-shell paste used in this study. Further investigations on the optimized spray-coating type of electromagnetic shielding material are required based on the composition of the core-shell paste and the thickness of the coating film.

Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure

In this study, we reported a laminated CNTs/Mg composite fabricated by spray-deposition and subsequent hot-press sintering, which realized simultaneous enhancement effects on strength and electromagnetic interference (EMI) shielding effectiveness (SE) by the introduced CNTs and CNT induced laminated 'Mg-CNT-Mg' structure. It was found that the CNTs/Mg composite with 0.5 wt.% CNTs not only exhibited excellent strength-toughness combination but also achieved a high EMI SE of 58 dB. The CNTs increased the strength of the composites mainly by the thermal expansion mismatch strengthening and blocking dislocation movements. As for toughness enhancement, CNTs induced laminated structure redistributes the local strain effectively and alleviates the strain localization during the deformation process. Moreover, it could also hinder the crack propagation and cause crack deflection, which resulted in an increment of the required energy for the failure of CNTs/Mg composites. Surprisingly, because of the laminated structure induced by introducing CNTs, the composite also exhibited an outperforming EMI SE in the X band (8.2-12.4 GHz). The strong interactions between the laminated 'Mg-CNT-Mg' structure and the incident electromagnetic waves are responsible for the increased absorption of the electromagnetic radiation. The lightweight CNTs/Mg composite with outstanding mechanical properties and simultaneously increased EMI performance could be employed as shell materials for electronic packaging components or electromagnetic absorbers.