Constitutive Model Parameter Identification Based on Optimization Method and Formability Analysis for Ti6Al4V Alloy

An Inverse Optimization Method for the Parameter Determination of the High-Temperature Damage Model and High-Temperature Damage Graph of Ti6Al4V Alloy

Ti6AL4V alloy is widely used in the biomedical and energy vehicle industries, among others. Ti6Al4V alloy cannot be fabricated at ambient temperatures; hence, it requires hot forming. However, this method is susceptible to crack defects. The crack defect problem of Ti6AL4V alloy in the hot-forming process cannot be ignored, so we must develop a precise hot-forming damage prediction model. In this study, three high-temperature damage models of Ti6Al4V alloy were developed, considering the temperature and strain rate. These models were derived from the normalized Cockcroft and Latham (NCL), Oyane, and Rice and Tracey (RT) damage models. The damage parameters of the models were identified using a genetic algorithm combined with finite element simulation. The force accumulation error of the Ti6AL4V alloy specimen, which was obtained from a simulated thermal tensile test and an actual test, was used as an optimization target function. Then, the damage parameters were optimized using the genetic algorithm until the target function reached the minimum value. Finally, the optimal damage model parameter was obtained. Through program development, the three high-temperature damage models established in this paper were embedded into Forge^® NxT 2.1 finite element software. The simulated thermal tensile test of Ti6AL4V alloy was performed at a temperature of 800-1000 °C and a strain rate of 0.01-5 s^-1. The simulated and actual fracture displacements of the tensile specimens were compared. The correlation coefficients (R) were calculated, which were 0.997, 0.951, and 0.912. Of the high-temperature damage models, the normalized Cockcroft and Latham high-temperature damage model had higher accuracy in predicting crack defects of Ti6Al4V alloy during the hot-forming process. Finally, a fracture strain graph and a high-temperature damage graph of Ti6Al4V alloy were constructed. The Ti6Al4V alloy damage evolution and thermal formability were analyzed in relation to the temperature and strain rate.

Simulation and Optimization of Connection-Strength Performance of Axial Extrusion Joint

Axial extrusion-connection technology is one of the important connection technologies for hydraulic piping systems, with high sealing performance and mechanical strength. In this paper, the finite-element-modeling method is used to simulate the experimental process of the connection strength of the axial extrusion joint. The generation mechanism and calculation method of the connection strength are analyzed. To optimize the joint strength, orthogonal testing and grey correlation analysis are used to analyze the influencing factors of joint strength. The key factors affecting joint strength are obtained as the friction coefficient μ1, μ2 between joint components and the groove angle θ1 of the fittings body. The back-propagation (BP) neural-network algorithm is used to establish the connection-strength model of the joint and the genetic algorithm is used to optimize it. The optimal connection strength is 8.237 kN and the optimal combination of influencing factors is 0.2, 0.4 and 76.8°. Compared with the prediction results of the neural-network genetic algorithm, the relative error of the finite-element results is 3.9%, indicating that the method has high accuracy. The results show that the extrusion-based joining process offers significant advantages in the manufacture of high-strength titanium tubular joints.