Novel Bioformulations Developed from Pseudomonas putida BSP9 and its Biosurfactant for Growth Promotion of Brassica juncea (L.)

Bioformulation of Bacillus proteolyticus MITWPUB1 and its biosurfactant to control the growth of phytopathogen Sclerotium rolfsii for the crop Brassica juncea var local, as a sustainable approach

Bacillus proteolyticus MITWPUB1 is a potential producer of biosurfactants (BSs), and the organism is also found to be a producer of plant growth promoting traits, such as hydrogen cyanide and indole acetic acid (IAA), and a solubilizer of phosphate. The BSs were reportedly a blend of two classes, namely glycolipids and lipopeptides, as found by thin layer chromatography and Fourier-transform infrared spectroscopy analysis. Furthermore, semi-targeted metabolite profiling via liquid chromatography mass spectroscopy revealed the presence of phospholipids, lipopeptides, polyamines, IAA derivatives, and carotenoids. The BS showed dose-dependent antagonistic activity against Sclerotium rolfsii; scanning electron microscopy showed the effects of the BS on S. rolfsii in terms of mycelial deformations and reduced branching patterns. In vitro studies showed that the application of B. proteolyticus MITWPUB1 and its biosurfactant to seeds of Brassica juncea var local enhanced the seed germination rate. However, sawdust-carrier-based bioformulation with B. proteolyticus MITWPUB1 and its BS showed increased growth parameters for B. juncea var L. This study highlights a unique bioformulation combination that controls the growth of the phytopathogen S. rolfsii and enhances the plant growth of B. juncea var L. Bacillus proteolyticus MITWPUB1 was also shown for the first time to be a prominent BS producer with the ability to control the growth of the phytopathogen S. rolfsii.

Liquid Bioformulation: A Trending Approach Towards Achieving Sustainable Agriculture

The human population is expanding at an exponential rate, and has created a great surge in the demand for food production. To intensify the rate of crop production, there is a tremendous usage of chemical pesticides and fertilizers. The practice of using these chemicals to enhance crop productivity has resulted in the degradation of soil fertility, leading to the depletion of native soil microflora. The constant application of these hazardous chemicals in the soil possesses major threat to humans and animals thereby impacting the agroecosystem severely. Hence, it is very important to hunt for certain new alternatives for enhancing crop productivity in an eco-friendly manner by using the microbial bioformulations. Microbial bioformulations can be mainly divided into two types: solid and liquid. There is a lot of information available on the subject of solid bioformulation, but the concept of liquid bioformulation is largely ignored. This article focuses on the diverse spectrum of liquid bioformulation pertaining to the market capture, its different types, potency of the product, mode of usage, and the limitations encountered. Also the authors have tried to include all the strategies required for sensitizing and making liquid bioformulation approach cost effective and as a greener strategy to succeed in developing countries.

Microbial Biosurfactant as an Alternate to Chemical Surfactants for Application in Cosmetics Industries in Personal and Skin Care Products: A Critical Review

Cosmetics and personal care items are used worldwide and administered straight to the skin. The hazardous nature of the chemical surfactant utilized in the production of cosmetics has caused alarm on a global scale. Therefore, bacterial biosurfactants (BS) are becoming increasingly popular in industrial product production as a biocompatible, low-toxic alternative surfactant. Chemical surfactants can induce allergic responses and skin irritations; thus, they should be replaced with less harmful substances for skin health. The cosmetic industry seeks novel biological alternatives to replace chemical compounds and improve product qualities. Most of these chemicals have a biological origin and can be obtained from plant, bacterial, fungal, and algal sources. Various biological molecules have intriguing capabilities, such as biosurfactants, vitamins, antioxidants, pigments, enzymes, and peptides. These are safe, biodegradable, and environmentally friendly than chemical options. Plant-based biosurfactants, such as saponins, offer numerous advantages over synthetic surfactants, i.e., biodegradable, nontoxic, and environmentally friendly nature. Saponins are a promising source of natural biosurfactants for various industrial and academic applications. However, microbial glycolipids and lipopeptides have been used in biotechnology and cosmetics due to their multifunctional character, including detergency, emulsifying, foaming, and skin moisturizing capabilities. In addition, some of them have the potential to be used as antibacterial agents. In this review, we like to enlighten the application of microbial biosurfactants for replacing chemical surfactants in existing cosmetic and personal skincare pharmaceutical formulations due to their antibacterial, skin surface moisturizing, and low toxicity characteristics.

Fluopyram removal from agricultural equipment rinsing water using HSF pilot-scale constructed wetlands

Fluopyram is a novel broad-spectrum fungicide with nematocidal activity, and as an extensively used pesticide, it could cause toxicity in nontarget organisms. The aim of this study was to explore the efficiency of five horizontal subsurface flow (HSF) constructed wetlands (CWs) to remove fluopyram from rinsing water produced during the cleaning of pesticide spraying equipment. Four CWs, namely WG-R, WG-R-P, WG-C, and WG-U, contained fine gravel as porous media. WG-R and WG-R-P were planted with Phragmites australis, WG-C with Typha latifolia, and WG-U was left unplanted. Bioaugmentation with plant growth-promoting rhizobacteria was conducted in WG-R-P unit. The fifth unit (WGZ-R) planted with Phragmites australis and contained gravel and zeolite as porous media. All of CWs were loaded on a daily basis from December 2019 to January 2021 with water fortified with fluopyram. The removal rate follows the pattern of WG-R-P (70.67%) > WGZ-R (62.06%) > WG-C (59.98%) > WG-R (36.10%) > WG-U (25.09%). The most important parameters affecting the fluopyram removal were bioaugmentation, zeolite presence in porous media, and plant species. The WG-R-P unit showed higher fluopyram removal in comparison to the WG-R (increase about 96%), the zeolite increased the fluopyram removal by 72%, and the WG-C unit showed 66% higher fluopyram removal than the WG-R unit.

Cyclic siloxane biosurfactant-producing Bacillus cereus BS14 biocontrols charcoal rot pathogen Macrophomina phaseolina and induces growth promotion in Vigna mungo L

Rhizobacteria are vital component of soil-plant interfaces which helps in plant growth responses and disease management. Precisely, the role of biosurfactant production by rhizobacteria in biocontrol mechanisms is underscored. The current study explores the destructive effect of a biosurfactant-producing bacterium Bacillus cereus BS14 on fungal growth under in vitro experiments and showed in vivo reduction of disease severity in pulse crop Vigna mungo. In this study, B. cereus BS14 was observed as plant growth-promoting rhizobacterium (PGPR) based on abilities of production of phytohormone and HCN, phosphate solubilization and biocontrol of Macrophomina phaseolina. The purified biosurfactant from BS14 inhibited the fungal growth by arresting radially growing mycelia. Scanning electron microscope (SEM) study revealed deformities at cellular level in the mycelia of M. phaseolina. The biosurfactant of Bacillus BS14 was identified as cyclic siloxane in GC-MS spectroscopy and FT-IR spectroscopy analyses. In the pot trial studies, B. cereus BS14 proved its efficiency for the growth promotion of Vigna mungo and significantly reduced disease severity index. The present study concludes that biosurfactant of rhizobacterial origin and rhizobacteria can serve for biological control, improvement in crop production and agricultural sustainability. In future, it can be developed as biological control and biofertilizer formulations for legume crops, and commercialized for routine farming practices.

Biosurfactant based formulation of Pseudomonas guariconensis LE3 with multifarious plant growth promoting traits controls charcoal rot disease in Helianthus annus

Biosurfactants are environment compatible surface-active biomolecules with multifunctional properties which can be utilized in various industries. In this study a biosurfactant producing novel plant growth promoting isolate Pseudomonas guariconensis LE3 from the rhizosphere of Lycopersicon esculentum is presented as biostimulant and biocontrol agent. Biosurfactant extracted from culture was characterized to be mixture of various mono- and di-rhamnolipids with antagonistic activity against Macrophomina phaseolina, causal agent of charcoal rot in diverse crops. Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR) analysis confirmed the rhamnolipid nature of biosurfactant. PCR analysis established the presence of genes involved in synthesis of antibiotics diacetylphloroglucinol, phenazine 1-carboxylic acid and pyocyanin, and lytic enzymes chitinase and endoglucanase suggesting biocontrol potential of the isolate. Plant growth promoting activities shown by LE3 were phosphate solubilization and production of siderophores, indole acetic acid (IAA), ammonia and 1-aminocyclopropane-1-carboxylate deaminase (ACCD). To assemble all the characteristics of LE3 various bioformuations were developed. Amendment of biosurfactant in bioformulation of LE3 cells improved the shelf life. Biosurfactant amended formulation of LE3 cells was most effective in biocontrol of charcoal rot disease of sunflower and growth promotion in field conditions. The root adhered soil mass of plantlets inoculated with LE3 plus biosurfactant was significantly higher over control. Biosurfactant amended formulation of LE3 cells caused maximum yield enhancement (80.80%) and biocontrol activity (75.45%), indicating that addition of biosurfactant improves the plant-bacterial interaction and soil properties leading to better control of disease and overall improvement of plant health and yield.