Utilization of Sulfonated Waste Polystyrene-Based Cobalt Ferrite Magnetic Nanocomposites for Efficient Degradation of Calcon Dye

Conversion of Waste Expanded Polystyrene into Blue-Emitting Polymer Film for Light-Emitting Diode Applications

The wide range of applications and continuous demand for plastics is causing serious global environmental problems. Massive discharges of expanded polystyrene (EPS) are thought to be primarily responsible for the increased white pollution. Waste EPS has received wide attention in the development of innovative products. White light-emitting diodes pumped by a near-UV chip (n-UV WLEDs) are regarded as a very promising solid-state lighting. The performance of the n-UV WLED is largely determined by the properties of the tricolor luminescence materials. In this work, a blue-emitting polymer film for n-UV WLED applications was developed from waste EPS. First, using waste EPS as a raw material, benzimidazole groups were bonded to PS benzene rings by chemical reactions to obtain modified PS (PS-PBI). Then, a film based on PS-PBI was prepared by a simple solution drop-casting method. The PS-PBI film can emit intense blue light when irradiated with 365 nm light. An n-UV WLED pumped by a 365 nm UV chip was fabricated using PS-PBI film as the blue-emitting layer. The fabricated n-UV WLED shows excellent luminescence properties, such as a bright white light with color coordinates of (0.337, 0.331), a relatively low color temperature (CCT, 5270 K), and an especially high color rendering index (CRI, 93.6). The results prove that the blue-emitting PS-PBI film prepared from waste EPS is a very promising candidate for n-UV WLED applications. The strategy of converting waste EPS into a high-value-added blue-emitting film in this work provides a convenient and feasible approach for upcycling waste EPS, achieving significant environmental and economic benefits.

Dye removal membrane from electrospun nanofibers of blended polybutylenesuccinate and sulphonated expanded polystyrene waste

Polystyrene (PS) is a thermoplastic polymer used in food packaging and the manufacture of trays and cups, among other applications. In this work, the preparation of a membrane by electrospinning blended sulphonated expanded PS waste and polybutylenesuccinate (PBS) is described. The fiber quality is controlled by selecting the right polymers' ratios and solvents. Investigation of the structure of the produced membranes by Fourier transform infrared spectroscopy-attenuated total reflectance confirmed the successful sulphonation of expanded PS and the appearance of characteristic (PBS) bands in the prepared blends. Morphology study of the electrospun membranes using a scanning electron microscope revealed that the quality of the fibers is improved significantly by increasing the amount of PBS in the blend solution. Moreover, continuous and more homogenous fibers are produced by increasing the ratio of PBS to 2%. The efficiency of the prepared membranes in dye removal was tested using methylene blue. The effects of different parameters such as, pH, contact time, temperature, and dye concentration have been studied. Also, kinetic and adsorption isotherm models as well as the durability of the prepared membranes were investigated. The membrane prepared from PSS/1% PBS demonstrated the highest dye uptake (846 mol) with good regeneration efficiency. The adsorption process was found to be endothermic and fits the Freundlich isotherm and pseudo-second-order kinetic model. The values of activation energy for the adsorption process are 36.98, 30.70, and 43.40 kJ/mol over PSS, PSS/1% PBS and PSS/2% PBS, respectively.