Surgical Correction of Pelvic Malunion and Nonunion

Late surgical correction after complex unstable pelvic fracture 61 C3 (OTA/AO) of an 18-year-old woman

Surgical fixation of pelvic fractures is often necessary to restore fracture stability and improve patient outcomes. However, early operative management of pelvis fractures is not widely available in many health systems, resulting in conservative treatment approaches. Conservative approaches can lead to uncorrected pelvic deformities, which are challenging to treat and increase the risk of serious complications such as malunion. Treatment of pelvic malunion requires specialized care, access to necessary equipment, and a clearly defined treatment protocol. However, there is a lack of literature describing treatment algorithms for pelvic fracture malunion. This case report aims to incrementally fill this gap in the literature and highlight a logical step-by-step approach for reconstruction of pelvic malunion. This report is a single case of an 18-year-old woman who sustained complex unstable pelvic fracture, indicated for a 3-step reconstruction at a hospital with limited resources but access to computed tomography scan and some specialized pelvis reduction instruments. Postoperative imaging of the pelvis indicated satisfactory reduction and stable fixation of the pelvic reconstruction. After surgery, the patient was able to perform full axial load with no reported pain. This report provides a detailed description of each step of the operative management of a pelvic malunion case with clearly defined sequences, reduction tools, and positioning maneuvers necessary. Demonstrated in this case report, strategic preoperative planning is critical to successfully treating pelvic malunion and improving patient outcomes. This case report provides the necessary information on the management of pelvic reconstruction to inform other surgeons in underserved regions.

Three-dimensional printing versus traditional surgery for inveterate pelvic and acetabular fractures: A retrospective study of 37 patients

Treatment of deformed pelvic and acetabular fractures is a considerable challenge for orthopedic surgeons. The aim of this study was to assess the availability of a three-dimensional (3D) printing model used in patients with inveterate pelvic and acetabular fractures by comparing 3D printing technology with conventional surgery. We conducted a retrospective review of patients with inveterate pelvic and acetabular fractures treated in our department between January 2008 and June 2020. The patients were divided into 2 groups according to their willingness. Perioperative data and clinical outcomes were compared to evaluate clinical efficacy. The t-test, Fisher exact test, and multivariable logistic regression analysis were conducted. A P value of .05 or less was considered to be statistically significant (two-tailed). Thirty-seven patients were enrolled in our study. Seventeen patients were divided into the case group treated by 3D printing model-assisted preoperative planning, and 20 patients were divided into the control group treated by conventional surgery. Patients treated with the 3D printing model had significantly shorter operation times, less blood loss, and shorter fluoroscopy times. Patients in the case group also showed better pain relief according to visual analog scale scores. However, the elevations in pelvis and hip joint functional outcomes were similar between the 2 groups, and no significant difference was shown in the radiological result. The usage of 3D printing techniques in patients with inveterate pelvic and acetabular fractures is of great importance in preoperative preparation and optimization of surgery but cannot improve postoperative function compared with conventional treatment.

Gradual Traction Reduction With the Ilizarov Method for Tile C1.2 Old Pelvic Fracture: A Case Report

CASE

A 20-year-old man with a Tile C1.2 pelvic fracture was treated with skeletal traction. After 3 months, the patient was unable to stand and walk, and the right lower limb was shortened by 7 cm. Radiographs showed that the sacroiliac joint dislocation was not reduced. Gradual traction reduction with the Ilizarov method was used to correct sacroiliac joint dislocation, and open internal fixation was performed. Postoperatively, the old pelvic fracture was successfully reduced without sacral plexus injury.

CONCLUSION

Gradual traction reduction with the Ilizarov method can reduce the risk of sacral plexus injury and achieve satisfactory reduction of Tile C1.2 old pelvic fractures.

Sacral osteotomy combined with triangular osteosynthesis in the treatment of malunion and nonunion of vertically displaced pelvic fractures

Background

Malunion and nonunion of vertically displaced pelvic fractures result in lower limb length discrepancies, claudication, and pain. There have been few previous reports of this type of corrective surgery for these old pelvic fractures. We present a surgical technique of sacral osteotomy combined with triangular osteosynthesis in the treatment of malunion and nonunion of vertically displaced pelvic fractures and report on its short-term clinical results.

Methods

We retrospectively reviewed nine patients (five males and four females) with malunion or nonunion of vertically displaced pelvic fractures treated with sacral osteotomy and triangular osteosynthesis from April 2015 to January 2020. The age ranged from 14 to 45 years (average, 30.7 years). The time from injury to deformity correction surgery ranged from 3 months to 5 years (average, 12.8 months). The vertical displacement of a unilateral hemipelvis was 3.0–4.5 cm (average, 3.80 cm). According to AO/OTA classification at the initial fracture, there are eight cases in type C1.3 and one case in type C3.3. Sacral osteotomy and triangular osteosynthesis were used in all nine patients. The degree of unilateral hemipelvic reduction was assessed postoperatively based on measurements from the anteroposterior (AP) X-ray. Majeed score and pain visual analog scale (VAS) were used to assess the therapeutic effect of the patients during follow-up.

Results

In all nine patients, postoperative AP X-ray showed correction displacement of 1.7–3.9 cm (average, 3.20 cm). All the patients were followed up for 6–36 months (average, 12.7 months). At the last follow-up, the Majeed score of pelvic fracture increased from an average of 53.9 points (30–84 points) preoperatively to 87.0 points (72–94 points), and the VAS score for pain decreased from an average of 6.0 points (4–8 points) preoperatively to 1.2 points (0–3 points). None had complications like infection, implant broken, screw loosening, iatrogenic nerve, and blood vessel injury.

Conclusion

Sacral osteotomy combined with triangular osteosynthesis for the treatment of pelvic malunion and nonunion caused by sacral fractures can correct significantly vertical displacement of a unilateral pelvis, prolong limb length, and reconstruct the stability of a pelvic ring, achieving good clinical results.

Pelvic Malunion: A Systematic Review, Dichotomy of Definitions and Treatment

Background and Objectives: Pelvic nonunion and malunion have been documented as rare complications in pelvic fractures and literature describing these topics is severely limited. Articles dedicated solely to pelvic malunion are nearly nonexistent. We conducted a literature search with the goal of providing a summary of the definition, causes, treatment strategies, and outcomes of pelvic malunion correction. Materials and Methods: An initial review of the literature was performed using the PubMed, ScienceDirect, and Cochrane Database of Systematic Reviews databases. Search terms used were “malunion” AND “pelvic” OR “pelvis”. Duplicate articles, non-English language articles without translations available and non-human subject studies were excluded. Results: Eleven original publications were found describing experiences with pelvic malunion. Seven of the articles were exclusively dedicated to the topic of pelvic fracture malunion, and only two reported on a series of patients treated for malunion with variably staged procedures. Most reports define pelvic pain as the main indication for surgical correction, along with gait disturbance, standing or sitting imbalance, and urinary or sexual dysfunction. Radiographically, vertical displacement of one to two centimeters and rotation of the hemipelvis of fifteen degrees or more have been described in defining malunion. No treatment algorithms exist, and each patient is treated with a unique work-up and operative plan due to the complexity of the problem. Only one series reported a patient satisfaction rate of 75% following malunion treatment. Conclusions: Pelvic malunion is a rare complication of pelvic ring injury and is seldom discussed in the literature. We found two small case series reporting exclusively on malunion treatment and complications. While some of the combination studies made the distinction in the diagnosis of malunion and nonunion, they rarely differentiated the treatment outcomes between the two categories. This paper describes pelvic malunion and highlights the need for more research into surgical outcomes of treatment specifically regarding functionality, patient satisfaction, and recurrence of preoperative symptoms.

Treatment of unstable pelvic ring injury with a dual internal anterior subcutaneous fixator using spinal instrumentation called "dual INFIX": A case report

Introduction

External fixation, various subcutaneous screw fixations, and plate fixation can be considered as fixation methods for unstable pelvic ring fractures. We describe a first case of treated unstable pelvic ring injury using a dual internal anterior subcutaneous fixator we called "dual INFIX," comprising four screws, two subcutaneous rods, and two cross-link connectors, without posterior fixation.

Case Report

An 81-year-old man sustained an unstable pelvic injury (AO type B2) with fracture of the left ilium and pubis. Dual INFIX was used to stabilize the pelvic ring injury. Polyaxial screws were introduced along a path between the anterior inferior iliac spine and ipsilateral posterior superior iliac spine until the head of the screw lay immediately above the fascia. Bilateral cranial screws were connected by a rod passed subcutaneously, and caudal screws were connected by the other rod. Finally, cross-link connectors connected cranial and caudal rods on the right and left. One year after the first operation, the patient could walk without a cane and had no limitation of daily living and bony fusion was achieved.

Conclusion

The stability of the pelvic ring of dual INFIX was sufficient to achieve bony fusion in this case. The stability of dual INFIX should be stronger than that of INFIX. Dual INFIX as with INFIX has other advantages such as ease of management compared with external fixation, and nonnecessity of strict anatomical reduction compared with various percutaneous screw fixation. Furthermore, this technique is simple and minimally invasive compared with plate fixation because it does not require open surgery. However, because the type C fracture with an unacceptable position of reduction by closed reduction has the possibility to become a symptomatic malunion, such cases should not be treated by this method. Furthermore, it is necessary for pelvic stabilization using dual INFIX that the contralateral pelvis is intact because dual INFIX stabilizes the fracture side with the other side of the pelvis. Dual INFIX can be considered as an option of fixation methods for type B-1 or 2 pelvic ring injuries.

Case series of two successful pelvic ring reconstructions using a pedicled anterolateral thigh flap

Open pelvic ring fractures can have devastating functional consequences including prolonged disability, chronic pain, infection, and even death. These injuries are uncommon but often involve soft tissue defects. Without early and appropriate coverage, patients are likely to sustain infection, which can be fatal. Here, we present the successful use of a pedicled ALT flap in two patients with soft tissue defects due to open pelvic ring injury. The pedicled ALT flap can be harvested as a composite flap comprising a portion of the skin, fascia, and muscle depending on the defect. Although the ALT flap has often been employed for abdominal wall and abdomino-perineal reconstruction, this is the first case series to report the use of the ALT flap in a subacute traumatic setting for pelvic ring reconstruction.

Surgical management of chronic pelvic instability following periacetabular osteotomy nonunion

INTRODUCTION

Periacetabular osteotomy (PAO) is an established treatment for symptomatic acetabular dysplasia in skeletally mature individuals without arthritis. Pelvic nonunion and associated stress fractures are under-reported. Nonunited stress fractures can cause continued buttock pain and pelvic instability. The aim of this study is to report on our experience managing patients with ongoing pain following nonunion of PAO.

PATIENTS AND METHODS

8 patients presented to a tertiary referral pelvic service with symptomatic PAO nonunion between 2015-2018. All patients underwent open reduction internal fixation of the superior pubic ramus nonunion, with ipsilateral iliac autograft, at an average of 48.1 (15-82) months following initial osteotomy. Demographic and perioperative data were recorded. Follow-up was on average to 9.9 months, once union was confirmed radiographically.

RESULTS

All patients were female and average age was 31.8 (18-41) years. In 7/8 (87.5%) patients a modified Stoppa approach was successfully utilised. 1 patient required an ilioinguinal approach due to the amount of rotational correction. All patients went on to union at the superior pubic ramus and reported improvement in mechanical symptoms. 5/8 (62.5%) patients were noted to develop union of the posterior column or inferior pubic ramus stress fracture indirectly. 2/8 (25%) patients developed progression of intra-articular pain, despite restoration of pelvic stability. 1 patient required intraoperative transfusion due to femoral vein injury. There were no other complications seen in this series.

CONCLUSIONS

To our knowledge, this is the largest case series of surgically managed PAO nonunion. Pelvic instability resulting from nonunion and stress fracture can be satisfactorily addressed by mobilising, grafting and plating the nonunion at the superior pubic ramus. The modified Stoppa approach is suitable in most cases, allowing excellent exposure whilst minimising the insult to soft tissues. The altered anatomy of the pelvis following PAO should be anticipated to reduce the risk to nearby neurovascular structures.

Post-traumatic acetabular dysplasia following pelvic fracture malunion associated with an acetabular labral tear: A case report and literature review

Residual acetabular dysplasia has been reported to be the pre-arthritic condition of the hip due to abnormal joint force during the normal physiological load that leads to an acetabular labral tear. This report shows the sequalae of a malunited acetabulo-pelvic fracture that resulted in hip dysplastic morphology and may be the cause of subsequent acetabular labral tears. The under-coverage or the dysplastic alignment of the pelvis after treatment of the fracture should be of concern for a secondary acetabular labral tear of the hip.

Autologous Transplantation of Press-fit Bone Cylinders in the Treatment of Pelvic Nonunion

The present study describes method for autologous bone transplantation to an area of nonunion at the pelvic ring in a way that ensures the best possible bone‐to‐bone interface (“press‐fit”) and provides optimal preconditions for the ingrowth of the bone graft. We modified a technique that has been used to transplant press‐fit bone‐baseplate‐cartilage cylinders for the repair of joint cartilage defects. The technique allows for precise harvesting of bone cylinders with a diamond‐coated and fluid‐cooled instrument. At the site where the graft shall be inserted, a cylindrical hole is created with a corresponding hollow diamond‐coated trephine. This ensures an optimal press‐fit implantation of the graft. The new surgical technique has been applied in four patients with nonunion of the pelvic ring. No intraoperative or postoperative complications occurred. In three patients, the procedure led to a reduction of pain and a higher level of mobility as well as a timely radiographic union (imaging not available for another patient). Our technique offers a valuable new treatment option for pelvic nonunion. The current article serves as a proof of concept. Future comparative studies will have to determine its value in detail.

Pelvic post-traumatic asymmetry: Assessment and sequenced treatment

The most common cause of post-traumatic pelvic asymmetry is, by far, initial nonoperative treatment.

Open reduction and internal fixation of unstable pelvic fractures are recommended to avoid pelvic nonunion or subsequent structural deformities.

The most common symptom is pelvic pain. Pelvic instability is another symptom, as well as persistent urogenital problems and neurological sequelae.

Preoperative evaluation of these patients requires careful clinical and functional assessment, in addition to a complete radiological study.

Surgical treatment of pelvic fracture nonunions is technically demanding and has potentially serious complications.

We have developed a new classification that modifies and completes Mears and Velyvis’s classification in which we highlight two types of post-traumatic sequelae with different clinical conditions and whose basic differentiating element is whether pelvic deformity is present or not. Based on this classification, we have established our strategy of surgical treatment.

Cite this article: EFORT Open Rev 2018;3 DOI: 10.1302/2058-5241.3.170069.

SACRAL FRACTURE TREATMENT WITH A VARIATION OF THE LUMBOPELVIC FIXATION TECHNIQUE

ABSTRACT Spinopelvic instability is an uncommon injury that is caused by high-energy traumas. Surgical treatment is used, in the majority of cases, to restore stability and enable early mobilization. Various stabilization techniques have been used in the treatment of spinopelvic instability, and lumbopelvic fixation (LPF) is currently the technique of choice due to its biomechanical superiority. One of its limitations is the fact that the technique does not directly address the lower sacral segment, permitting a residual kyphotic deformity. This deformity has been attributed to unsatisfactory outcomes, including late development of pelvic floor muscle defects and complications during childbirth. We report a case of a patient with spinopelvic instability due to sacral fracture, which was treated using a variation of the LPF technique, in which rods and screws originally developed for cervicothoracic fixation were adapted to correct sacral deformity in the sagittal plane. The upper sacral segment was reduced indirectly using hip extension and femoral traction manoeuvres, associated with distraction manoeuvres via rods. Bone reduction forceps were used to reduce the kyphotic deviation in the lower sacral fragment, enabling its fixation to the lumbopelvic rod and screws system. There were no complications of infection, suture dehiscence, or breakage of the implants, and at the end of the first year of follow-up, the sacral kyphosis was normal and radiographic consolidation was confirmed. Our technique provides a viable and promising alternative to traditional LPF, making it especially useful in fractures with accentuated deviations of the lower sacral fragment. Level of Evidence: 4.Type of study: Case series

Current concepts in spondylopelvic dissociation

INTRODUCTION

Spondylopelvic dissociation is an uncommon and complex injury that results from high-energy trauma with axial overloading through the sacrum. Due to the life-threatening nature of these injuries, standard Advanced Trauma Life Support^® (ATLS) protocol must be used in the trauma setting as part of the initial management of these patients. The key to diagnosis is a good physical exam coupled with high level of suspicion. Radicular neurological deficits commonly are present in spondylopelvic dissociation (L5's roots) and should be documented for future evaluations. Radiographic views and CT-scan is preferred for the diagnosis.

BIOMECHANICS AND CLASSIFICATION

The authors briefly describe the anatomy and biomechanics of the pelvis, and present the main classifications used to define this rare lesion.

TREATMENT

Discussion about setting the boundaries of surgical stabilization, if there is still a role for conservative treatment, the importance of the initial treatment and the timing of intervention. Decompression is mandatory in the presence of canal compromise and progressive neurological deficit, regardless of biomechanical criteria for surgery. Kyphotic deformity occurs at the site of sacral transverse fracture and also reduces anteroposterior pelvis diameter. The technique of reduction and posterior surgical stabilization is emphasized. If residual kyphosis remains after bilateral lumbopelvic fixation by shifting of the lower sacral segment, we use S2 and/or S3 screws connected to transitional rods to additional reduction. An illustrated case is shown.

COMPLICATIONS

The infection of the wound and the failure of the implants are the most frequent complications of this surgical treatment.

CONCLUSION

Posterior stabilization is widely recognized as crucial in the treatment of pelvic disruptions. The concept of circumferential restoration of pelvic ring by bilateral lumbopelvic fixation and anterior fixation seems to be a nice option to increase stabilization and avoid bone misalignment.

Three-dimensional reduction and finite element analysis improves the treatment of pelvic malunion reconstructive surgery: A case report

RATIONALE

Pelvic malunion is a rare complication and is technically challenging to correct owing to the complex three-dimensional (3D) geometry of the pelvic girdle. Hence, precise preoperative planning is required to ensure appropriate correction. Reconstructive surgery is generally a 2- or 3-stage procedure, with transiliac osteotomy serving as an alternative to address limb length discrepancy.

PATIENT CONCERNS

A 38-year-old female patient with a Mears type IV pelvic malunion with previous failed reconstructive surgery was admitted to our department due to progressive immobilization, increasing pain especially at the posterior pelvic arch and a leg length discrepancy. The leg discrepancy was approximately 4 cm and rotation of the right hip joint was associated with pain.

DIAGNOSIS

Radiography and computer tomography (CT) revealed a hypertrophic malunion at the site of the previous posterior osteotomy (Mears type IV) involving the anterior and middle column, according to the 3-column concept, as well as malunion of the left anterior arch (Mears type IV).

INTERVENTIONS

The surgery was planned virtually via 3D reconstruction, using the patient's CT, and subsequently performed via transiliac osteotomy and symphysiotomy. Finite element method (FEM) was used to plan the osteotomy and osteosynthesis as to include an estimation of the risk of implant failure.

OUTCOMES

There was not incidence of neurological injury or infection, and the remaining leg length discrepancy was ≤ 2 cm. The patient recovered independent, pain free, mobility. Virtual 3D planning provided a more precise measurement of correction parameters than radiographic-based measurements. FEM analysis identified the highest risk for implant failure at the symphyseal plate osteosynthesis and the parasymphyseal screws. No implant failure was observed.

LESSONS

Transiliac osteotomy, with additional osteotomy or symphysiotomy, was a suitable surgical procedure for the correction of pelvic malunion and provided adequate correction of leg length discrepancy. Virtual 3D planning enabled precise determination of correction parameters, with FEM analysis providing an appropriate method to predict areas of implant failure.

Late reconstruction of severe open-book deformities of the pelvis - tips and tricks

BACKGROUND

The primary goal of treatment for open book pelvic injuries after high-energy trauma is to control haemorrhage and to close the pelvic ring anatomically. Less commonly, patients may present late with malunion or non-union.

METHODS

We reviewed five operatively treated patients with delayed severe open book deformities who had a diastasis of more than 6 cm. We describe the pre-operative workup, surgical strategy and challenges experienced. They specifically include: extensive scar and contracture formation, malunion, urogenital prolapse and difficult reduction of vertical shear element. A 5 to 15-point clinical scoring system based on quality of life regarding pain, ambulation, social function, continence control and presence of prolapse is proposed.

RESULTS

One elderly patient had early mortality after surgery. The other four patients had quality of life improvement by 3 to 5 points after one year. Correction is often clinically successful despite technical challenges and unpredictable radiological results.

CONCLUSION

External fixator and the C-clamp are good reduction tools. Powerful implants should be used and fixation of the posterior ring is mandatory. Staged urogenital and pelvic floor reconstruction is recommended before bony reconstruction to minimize the risk of wound contamination. Patients receiving this complex procedure have a good chance for improvement in pain and functional status.