Development and application of antibiotic-loaded bone cement beads

The effectiveness of pedicle screw immersion in vancomycin and ceftriaxone solution for the prevention of postoperative spinal infection: A prospective comparative study

OBJECTIVE

The aim of this study was to evaluate the efficacy of the local application of vancomycin hydrochloride (HCl)-ceftriaxone disodium hemiheptahydrate onto implants before using them to prevent postoperative infection.

METHODS

The study included 239 patients (153 women and 86 men; mean age: 48.23 ± 16.77 years) who had thoracolumbar stabilization with transpedicular screws. All surgeries were performed by the same surgeon. Patients were divided into two groups. In the group 1 (n = 104), implants were bathed in a solution of local prophylactic antibiotics for 5 seconds just before implantation. In the group 2 (n = 135), implants were not bathed before implantation. Local antibiotics used in the study was effective against gram positive bacteria (including methicillin resistant Staphylococcus aureus) and gram negative bacteria. The rate of surgical site infection and wound healing time were compared between the groups.

RESULTS

A total of 10 patients (4.1%) had deep wound infection and 20 (8.4%) had superficial infection. The most common bacteria was Staphylococcus aureus. One patient died 21 days after the surgery because of sepsis. The wound healed in a mean of 9.66 ± 2.04 days in patients who had no infection and in 32.33 ± 19.64 days in patients with infection (p < 0.001). The patients in group 1 had significantly less deep infection than the patients in group 2 (p < 0.05). However, there was no statistically significant difference between the groups for superficial infection. Patients with vertebral fracture had significantly lower deep infection rate in group 1. The deep infection rate of group 1 patients with diabetes, with bleeding of more than 2000 mL, transfused with blood transfusions above 3 units and with dural injury was significantly lower than those in the group 2. None of the patients had allergic reactions to the drugs used for local prophylaxis.

CONCLUSIONS

This study shown that bathing implants in antibiotics solution was an effective local prophylactic method to prevent deep infections in spinal surgeries with instrumentation.

LEVEL OF EVIDENCE

Level III, Therapeutic study.

Custom-Made Antibiotic Cement Nails in Orthopaedic Trauma: Review of Outcomes, New Approaches, and Perspectives

Since the first description in 2002 by Paley and Herzenberg, antibiotic bone cement nails (ACNs) have become an effective tool in the orthopaedic trauma surgeons' hands. They simultaneously elute high amounts of antibiotics into medullary canal dead space and provide limited stability to the debrided long bone. In this paper, we perform a systematic review of current evidence on ACNs in orthopaedic trauma and provide an up-to-date review of the indications, operative technique, failure mechanisms, complications, outcomes, and outlooks for the ACNs use in long bone infection.

Tetracycline nanoparticles loaded calcium sulfate composite beads for periodontal management

BACKGROUND

The objective of this study was to fabricate, characterize and evaluate in vitro, an injectable calcium sulfate bone cement beads loaded with an antibiotic nanoformulation, capable of delivering antibiotic locally for the treatment of periodontal disease.

METHODS

Tetracycline nanoparticles (Tet NPs) were prepared using an ionic gelation method and characterized using DLS, SEM, and FTIR to determine size, morphology, stability and chemical interaction of the drug with the polymer. Further, calcium sulfate (CaSO4) control and CaSO4-Tet NP composite beads were prepared and characterized using SEM, FTIR and XRD. The drug release pattern, material properties and antibacterial activity were evaluated. In addition, protein adsorption, cytocompatibility and alkaline phosphatase activity of the CaSO4-Tet NP composite beads in comparison to the CaSO4 control were analyzed.

RESULTS

Tet NPs showed a size range of 130±20nm and the entrapment efficiency calculated was 89%. The composite beads showed sustained drug release pattern. Further the drug release data was fitted into various kinetic models wherein the Higuchi model showed higher correlation value (R(2)=0.9279) as compared to other kinetic models. The composite beads showed antibacterial activity against Staphylococcus aureus and Escherichia coli. The presence of Tet NPs in the composite bead didn't alter its cytocompatibility. In addition, the composite beads enhanced the ALP activity of hPDL cells.

CONCLUSIONS

The antibacterial and cytocompatible CaSO4-Tet NP composite beads could be beneficial in periodontal management to reduce the bacterial load at the infection site.

GENERAL SIGNIFICANCE

Tet NPs would deliver antibiotic locally at the infection site and the calcium sulfate cement, would itself facilitate tissue regeneration.

Treatment of contaminated bone defects with clindamycin-reconstituted bone xenograft-composites

Contaminated or infected bone defects and osteomyelitis after trauma are frequently encountered in clinical practice. It is difficult to make a successful bone graft and control infection at the same time. To find a better method to resolve this dilemma, we prepared a novel clindamycin-reconstituted bone xenograft-composite (C-RBX-C) that comprised of crude bBMP (bovine bone morphogenetic protein), clindamycin, and cancellous bone scaffold, and investigated the morphology, biocompatibility, antibiotic release profile and osteoinductive potential of this composite. The ultrastructure of C-RBX-C was evaluated by scanning electron microscopy; the biocompatibility and osteoinductive potential were assessed by testing ectopic implants. The antibiotic release profile was evaluated using a disc-diffusion assay. Finally, this composite was used to repair a Staphylococcus aureus contaminated bone defect in a rabbit model. 16 weeks after the implantation of C-RBX-C, the radial defect had been completely recuperated, with significantly better formation of lamellar bone and recanalization of the marrow cavity, than in the controls (scaffolds without clindamycin or bBMP). These results demonstrate that our novel composite, with its concomitant osteoinductive and antibiotic properties, has significant potential for the treatment of contaminated or infected bone defects and osteomyelitis.

Addition of fusidic acid impregnated bone cement to systemic teicoplanin therapy in the treatment of rat osteomyelitis

We compared the efficacy of the combination of fusidic acid impregnated bone cement and systemic teicoplanin to systemic teicoplanin alone in implant-related osteomyelitis model in the rats. Foreign bodies were implanted into the medullary channels of 30 rat tibias after intramedullary inoculation of methicillin-resistant Staphylococcus aureus. Following proof of induction of osteomyelitis in the rats on the 21st day, a bone cement rod including 1/40 ratio of fusidic acid was inserted into the medullary channel of the tibias in the study group. Teicoplanin was administered i.m. at 20 mg/kg/day for 14 days to both the study and control groups. At the end of the treatment, the tibias were examined macroscopically, microbiologically and histopathologically. The elimination rate with the teicoplanin+fusidic acid combination was 81.8%, while with teicoplanin alone was 55.6% (p=0.33). Although the difference between the two groups was not statistically significant, the combination treatment had a positive effect in eliminating the microorganism.

Release of gentamicin sulphate from a modified commercial bone cement. Effect of (2-hydroxyethyl methacrylate) comonomer and poly(N-vinyl-2-pyrrolidone) additive on release mechanism and kinetics

The influence of the (2-hydroxyethyl methacrylate) (HEMA) monomer addition as a comonomer to the cement liquid component and of a polymer, poly(N-vinyl-2-pyrrolidone) (PVP) to the solid component of a standard CMW-1 bone cement on gentamicin sulphate (GS) on its drug release properties have been studied. The addition of HEMA modifies the habit of the delivery curves. The incorporation of PVP into the cement matrix, apparently, did not very much modify the shape of the HEMA modified cement release curves, but led to a remarkable increase of the maximum amount of GS released. This effect was proportional to the PVP concentration incorporated. From the matrix composition and SEM data, a model based on the morphology of the matrix has been proposed. The cumulative amount of GS released by each slab Mt is most adequately fitted and represented by the equation Mt = c + at 1/2 + b[1 - exp(-nt)], which corroborates that the release occurs according to the model proposed. by means of three discrete mechanisms, namely: (i) a short-term initial elution due to the imperfections in the poly(methyl methacrylate) covering of the most external GS beads, burst effect by the buffer solution; (ii) followed by a fracture by stress cracking in an active media of the coated GS beads located on the external surface of the matrix where water molecules enter to dissolve GS molecules releasing them into the buffer solution by a diffusion-controlled process; and (iii) a third process in which the buffer solution penetrates into the internal voids and cracks creating a series of channels in a labyrinthic structure, which may facilitate the access of water molecules to the plastic-coated GS beads within the bulk matrix. This third process is enhanced by the incorporation of PVP beads as dissolved molecules within the matrix. This water-soluble additive is leachable, generating a highly porous structure in the cement. This HEMA and PVP modified cement may be used as a drug delivery system to modulate the GS release rate.

Gentamicin sulphate release from a modified commercial acrylic surgical radiopaque bone cement. I. Influence of the gentamicin concentration on the release process mechanism

The purpose of the present work was the study of the gentamicin sulphate (GS) release from a commercial acrylic bone cement CMW-1 with the aims of establishing the influence of the slabs preparation as well as the release mechanism and kinetics. The effect of the amount of GS on the release kinetic parameters has been also investigated. In vitro release studies were performed in a buffered saline solution at pH 7.4 and 37 degrees C. The GS concentration was determined using an indirect spectrophotometric method with an o-phthaldialdehyde as a derivatizing reagent. A commercial and three modified samples were tested. The free and fractured surfaces of the GS cement slabs before and after the release studies were observed by means of scanning electron microscopy (SEM). For low GS concentration loading the release was very incomplete because most of the GS beads were encapsulated by the hydrophobic PMMA matrix. A higher amount of antibiotic was released from cement that has a higher amount incorporated. A model and therefore a mechanism of release based on this model have been proposed. It has allowed us to explain the changes in dissolution kinetics of an acrylic matrix type controlled release system up to 12% GS loading. The cumulative amount of GS released M(t)/M(i), was fitted as a function of time. For lower amounts of GS, the regression analysis (R(2)>0.99) revealed that the release is most adequately represented by M(t)/M(i)=b+kt(n), where b represents a burst effect. The goodness of fit decreases as the amount of GS increases. The influence of some other type of release mechanism for higher amounts of GS must be taken into account and a second model for the release, M(t)/M(i)=b+k x [1-exp(-kt)], is proposed.

Questions and Answers from the F.I.X./• Digibind in Chronic Digoxin Dosing /• Fosphenytoin (Cerebyx) Use in Dialysis Patients/ • MMR vs MR/ • Insulin Drip Protocol/ • Tobramycin Powder Alternatives

The Formulary Information Exchange (The F.I.X.) is an online drug information service available to subscribers of The Formulary Monograph Service or you may log on through drugfacts.com. In this column, we present samples of recent dialog on The F.I.X. If you would like more information on The Formulary Monograph Service or The F.I.X.

Antibiotic beads in the treatment of diabetic pedal osteomyelitis

Antibiotic-impregnated polymethylmethacrylate (PMMA) beads have improved the outcome of osteomyelitis treatment in both experimental models and clinical trials. The primary benefit of antibiotic-impregnated PMMA beads is that they provide high local concentrations of antibiotic while systemic levels of antibiotic remain low. Little has been written about the specific use of antibiotic-impregnated PMMA beads in the treatment of diabetic pedal osteomyelitis. The authors review antibiotic-impregnated PMMA beads and provide examples of their use in the treatment of diabetic pedal osteomyelitis.