Stability characteristics of cannabidiol for the design of pharmacological, biochemical and pharmaceutical studies

Cannabidiol (CBD) is one of the most promising cannabinoids in therapeutics. Nevertheless, the reported stability testing has been carried out with plant extracts and not with CBD as a drug substance. The aim of this work was to evaluate the stability of CBD in solution. A High-Performance Liquid Chromatography (HPLC) analytical method, with CBD in ethanol, was previously validated for these stability studies. The resulting method was linear and proportional in a range of concentrations from 1 to 150 µg CBD/mL, as well as precise. It was also considered suitable to quantify CBD in aqueous medium as reported in accuracy studies. The stability of CBD was influenced by multiple factors. Temperature was one of the most critical parameters, with an activation energy of 92.19KJ/mol. At room temperature, CBD was highly unstable (t₉₅ = 117.13 days). However, at 5 °C it was stable for at least 12 months. CBD was also sensitive to oxidation, with a short t₉₅ of 1.77 days in oxidizing environments, as well as to light. The photolytic reaction seems to be oxidative. The solvent influences CBD stability, and the latter is more stable in ethanol than in aqueous medium. In fact, in simulated physiological conditions (pH 7.4 and 37 °C) 10% of CBD was degraded within 24 h. These studies indicate that CBD is highly unstable, and this should be taken into account in the development of in vitro and in vivo studies of CBD activity and in the pharmaceutical development of dosage forms.

Enhancing ovarian cancer conventional chemotherapy through the combination with cannabidiol loaded microparticles

In this work, we evaluated, for the first time, the antitumor effect of cannabidiol (CBD) as monotherapy and in combination with conventional chemotherapeutics in ovarian cancer and developed PLGA-microparticles as CBD carriers to optimize its anticancer activity. Spherical microparticles, with a mean particle size around 25 µm and high entrapment efficiency were obtained. Microparticles elaborated with a CBD:polymer ratio of 10:100 were selected due to the most suitable release profile with a zero-order CBD release (14.13 ± 0.17 μg/day/10 mg Mps) for 40 days. The single administration of this formulation showed an in vitro extended antitumor activity for at least 10 days and an in ovo antitumor efficacy comparable to that of CBD in solution after daily topical administration (≈1.5-fold reduction in tumor growth vs control). The use of CBD in combination with paclitaxel (PTX) was really effective. The best treatment schedule was the pre + co-administration of CBD (10 µM) with PTX. Using this protocol, the single administration of microparticles was even more effective than the daily administration of CBD in solution, achieving a ≈10- and 8- fold reduction in PTX IC₅₀ respectively. This protocol was also effective in ovo. While PTX conducted to a 1.5-fold tumor growth inhibition, its combination with both CBD in solution (daily administered) and 10-Mps (single administration) showed a 2-fold decrease. These results show the promising potential of CBD-Mps administered in combination with PTX for ovarian cancer treatment, since it would allow to reduce the administered dose of this antineoplastic drug maintaining the same efficacy and, as a consequence, reducing PTX adverse effects.

CBD loaded microparticles as a potential formulation to improve paclitaxel and doxorubicin-based chemotherapy in breast cancer

Cannabidiol (CBD) has emerged as a potential agent for breast cancer management. In this work, the potential use of cannabidiol in solution (CBD_sol) and encapsulated in polymeric microparticles when combined with paclitaxel (PTX) and doxorubicin (DOX) in breast cancer treatment has been evaluated for the first time using MCF-7 and MDA-MB-231 cells. CBD_sol, previously administered at suboptimal concentrations (cell death < 10%), enhanced the PTX and DOX effect in both breast cancer cells. The co-administration of CBD_sol and PTX or DOX showed a synergistic effect. PLGA-502 was selected as the most suitable polymer to develop CBD-loaded microparticles. The developed formulation (CBD-Mps) was effective as monotherapy, showing extended antiproliferative activity for at least 10 days, and when combined with PTX or DOX. In fact, the use of CBD-Mps allows the combination of both, pre and co-administration strategies, with a single administration, also showing a significant increase in PTX and DOX antiproliferative activity. Finally, the anticancer effect of both CBD_sol and CBD-Mps as monotherapy or in combination with PTX was also confirmed in ovo, usingMDA-MB-231-derived tumours. This data evidences the promising inclusion of CBD in conventional breast cancer chemotherapy and the use of CBD-Mps for the extended release of this cannabinoid, optimising the effect of the chemotherapeutic agents.

Phyto-, endo- and synthetic cannabinoids: promising chemotherapeutic agents in the treatment of breast and prostate carcinomas

INTRODUCTION

The term 'cannabinoids' designates a family of compounds with activity upon cannabinoid receptors. Cannabinoids are classified in three groups: phytocannabinoids, endocannabinoids, and the synthetic analogues of both groups. They have become a promising tool in the treatment of cancer disease, not only as palliative agents, but also as antitumor drugs, due to their ability to inhibit the proliferation, adhesion, migration, invasion, and angiogenesis of tumour cells. Two of the cancers where they have shown high anticancer activity are breast and prostate tumours. Despite this potential clinical interest, several studies have also reported that cannabinoids can stimulate the proliferation of cancer cells at very low concentrations. Areas covered: The aim of this review is to evaluate the promising chemotherapeutic utility of phytocannabinoids, endocannabinoids, and synthetic cannabinoids in breast and prostate cancer. Expert opinion: Cannabinoids, in particular the non-psychoactive CBD, may be promising tools in combination therapy for breast and prostate cancer, due to their direct antitumor effects, their ability to improve the efficacy of conventional antitumor drugs and their usefulness as palliative treatment. Nevertheless, deeper studies to fully establish the mechanisms responsible for their antitumour and pro-tumour properties and their formulation in efficient delivery systems remain to be established.

Poly(epsilon-caprolactone) microparticles formed by the emulsion-evaporation method: effect of the variables of the different steps of the process on their size

In the present work the influence of the variables of the microencapsulation procedure on the size of poly (epsilon-caprolactone) microparticles (PECL-MP) obtained by the solvent evaporation method is analysed. This study will allow to choose the work conditions necessary to obtain a suitable PECL-MP size for parenteral administration. Agitation rate in the emulsion formation step, polymer concentration and organic/aqueous phase volume ratio were the variables of the microencapsulation procedure that showed a highest influence on the PECL-MP size. High polymer concentrations and low internal phase volumes had a negative effect on the microencapsulation yield. Neither the conditions of the organic solvent evaporation nor the freeze-dry process (when a cryoprotector as threalose was used) influenced on PECL-MP size. The usefulness of this study was confirmed by getting PECL-MP loaded with naloxone and with a mean diameter within 30-40 microm, suitable for parenteral administration.

Procedure to evaluate the stability during processing and storage of a medicated premix and medicated farm feed: erythromycin thiocyanate

In this paper, a stability study of a medicated premix and medicated farm feed containing erythromycin thiocyanate was planned. No drug degradation was detected during the medicated farm feed processing. In the medicated premix stability study, significant drug degradation was detected only at 40 degrees C and 75% relative humidity. Because after 2 years of storage at 25 degrees C and 60% relative humidity no degradation of erythromycin thiocyanate was detected, this period of time is proposed as the premix shelf life. In the medicated farm feed stability study, drug degradation was detected under accelerated conditions, but it was not detected under long-term storage conditions for 3 months. Therefore, the proposed shelf life of the medicated farm feed is 3 months, as this is time enough to be consumed. The planned stability study-storage conditions, testing frequency, and proposed data evaluation-allowed an easy and reliable evaluation of veterinary medicine stability.

Stability study of a sulfadimidine-containing medicated premix and its mixture with farm feed

The objective of this paper was to study the stability of a medicated premix and a medicated farm feed containing sulfadimidine as the active ingredient. The medicated premix is supplied as powdered form and administered orally after mixing with animal feed. The sulfadimidine analytical method described in United States Pharmacopoeia 23 cannot be used to carry out the stability study because of its lack of specificity for different degradation products. Therefore, a high-performance liquid chromatography method was developed to assay sulfadimidine. This method was optimized and validated for the stability study. According to International Committee Harmonization (ICH) guidelines, the samples were stored under long-term testing and accelerated conditions for the stability study of the premix and the medicated farm feed. Sulfadimidine degradation was not detected in either form under any of the conditions studied.

Microbiological bioassay of erythromycin thiocyanate: optimisation and validation

The validation of an analytical method for the quantitative determination of erythromycin thiocyanate formulated in an antibiotic preparation for veterinary use was carried out. This method is based on the microbiological method described in the European Pharmacopoeia to analyze erythromycin thiocyanate as a raw material. This erythromycin thiocyanate preparation is presented as a powder for oral administration after mixing with feed. For that reason, it was planned to validate the method for the quantitative determination of erythromycin thiocyanate incorporated both in the medicated premix and the mixture with feed. The microbiological method followed a linear model and was not proportional. The number of replicates needed to obtain a valid result was less than four in all cases. The small difference in concentration, expressed in natural logarithm detected by the method, was 0.1.