Carbon nanotubes buckypapers: A new frontier in wastewater treatment technology

Occurrence of contaminants in water is one of the major global concerns humanity is still facing today: most of them are extremely toxic and dangerous for human health, obliging their removal for a proper and correct process of sanitation. Among wastewater treatment technologies, in the view of development of sustainable and environmentally friendly processes, membrane adsorption has proved to be a fast and simple method in the removal of pollutants, offering great contaminants recovery percentages, fast adsorbent regeneration and recycle, and easy scale-up. Due to their large surface area and tunable chemistry, carbon nanotubes (CNTs)-based materials revealed to be extraordinary adsorbents, exceeding by far performances of ordinary organic and inorganic membranes such as polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, ceramics, currently employed in membrane technologies for wastewater treatment. In consideration of this, the review aims to summarize recent developments in the field of carbon nanotubes-based materials for pollutants recovery from water through adsorption processes. After a brief introduction concerning what adsorption phenomenon is and how it is performed and governed by using carbon nanotubes-based materials, the review discusses into detail the employment of three common typologies of CNTs-based materials (CNTs powders, CNTs-doped polymeric membranes and CNTs membranes) in adsorption process for the removal of water pollutants. Particularly focus will be devoted on the emergent category of self-standing CNTs membranes (buckypapers), made entirely of carbon nanotubes, exhibiting superior performances than CNTs and CNTs-doped polymeric membranes in terms of preparation strategy, recovery percentages of pollutants and regeneration possibilities. The extremely encouraging results presented in this review aim to support and pave the way to the introduction of alternative and more efficient pathways in wastewater treatment technologies to contrast the problem of water pollution.

Removal of Non-Steroidal Anti-Inflammatory Drugs from Drinking Water Sources by GO-SWCNT Buckypapers

Pharmaceutical products such as antibiotics, analgesics, steroids, and non-steroidal anti-inflammatory drugs (NSAIDs) are new emerging pollutants, often present in wastewater, potentially able to contaminate drinking water resources. Adsorption is considered the cheapest and most effective technique for the removal of pollutants from water, and, recently, membranes obtained by wet filtration method of SWCNT aqueous solutions (SWCNT buckypapers, SWCNT BPs) have been proposed as self-standing porous adsorbents. In this paper, the ability of graphene oxide/single-walled carbon nanotube composite membranes (GO-SWCNT BPs) to remove some important NSAIDs, namely Diclofenac, Ketoprofen, and Naproxen, was investigated at different pH conditions (pH 4, 6, and 8), graphene oxide amount (0, 20, 40, 60, and 75 wt.%), and initial NSAIDs concentration (1, 10, and 50 ppm). For the same experimental conditions, the adsorption capacities were found to strongly depend on the graphene oxide content. The best results were obtained for 75 wt.% graphene oxide with an adsorption capacity of 118 ± 2 mg g^-1 for Diclofenac, 116 ± 2 mg g^-1 for Ketoprofen, and 126 ± 3 mg g^-1 for Naproxen at pH 4. Overall, the reported data suggest that GO-SWCNT BPs can represent a promising tool for a cheap and fast removal of NSAIDs from drinking water resources, with easy recovery and reusability features.

Characterization of the cleaved edge cross section of the heterostructures with GaMnAs layer by the confocal micro-Raman spectroscopy

Confocal micro-Raman spectroscopy was used to measure cross-section linescans of the cleaved edge of heterostructures involving a GaMnAs layer. The investigations revealed a shift of the TO mode in the compressed GaMnAs layer to high frequencies relative to the TO GaAs mode in the substrate and to low frequencies in the tensile GaMnAs layers. These results are in agreement with the different manifestations of the anomalous Hall effect in the GaMnAs layers, with either compressive or tensile strains. It is shown that Raman spectroscopy is an appropriate method for the investigation of cross-sectional semiconductor heterostructures whose total thickness is comparable to the size of the analyzing laser spot.

Self-assembled nanocrystals discovered in Chelyabinsk meteorite

Current interest in nanomaterials is focused mostly on artificial materials fabricated for various applications. However, naturally occurring nanocrystal arrays, like those recently found in the meteorite that fell near Chelyabinsk in Russia on 15 February, 2013, can provide some new insights into the nature of nanomaterials, including the conditions for their natural occurrence. Here we report the results of our spectroscopic investigation of a fragment of the Chelyabinsk meteorite. The atomic structure of a fragment of the Chelyabinsk meteorite was studied using high-resolution transmission electron microscopy. Elemental and phase analysis of the object that was carried out by energy dispersive X-ray spectroscopy and electron diffraction revealed the presence of crystalline phases of different chemical compounds specific to meteorites of the LL group. In addition to single-crystal inclusions, extensive areas with ferropericlase nanocrystals having characteristic sizes from 3 to 15 nm were found in the structure of the meteorite. The study of the meteorite employing combination scattering of light (Raman) and photoluminescence spectroscopy methods has revealed quantum effects of ferropericlase nanoparticles and related photoluminescence with a maximum in the range of 675–800 nm.