Resonant Inelastic Soft X-ray Scattering and X-ray Emission Spectroscopy of Solid Proline and Proline Solutions

The amino group of proline is part of a pyrrolidine ring, which makes it unique among the proteinogenic amino acids. To unravel its full electronic structure, proline in solid state and aqueous solution is investigated using X-ray emission spectroscopy and resonant inelastic soft X-ray scattering. By controlling the pH value of the solution, proline is studied in its cationic, zwitterionic, and anionic configurations. The spectra are analyzed within a "building-block principle" by comparing with suitable reference molecules, i.e., acetic acid, cysteine, and pyrrolidine, as well as with spectral calculations based on density functional theory. We find that the electronic structure of the carboxyl group of proline is very similar to that of other amino acids as well as acetic acid. In contrast, the electronic structure of the amino group is significantly different and strongly influenced by the ring structure of proline.

Transit Time of Lamb Wave-Based Ultrasonic Flow Meters and the Effect of Temperature

Transit-time flow meters need to compensate for cross-sensitivity to temperature. We show that Lamb wave-based setups are less affected by temperature. An optimality criterion is derived that allows to tune the meter into a zero local sensitivity to temperature. For this end, the flow-induced change in ultrasonic transit time is revisited first. While wetted piston transducer meters are directly sensitive to the change in propagation speed, the change in time of flight of Lamb wave-based systems is due to the beam displacement. Second, the effect of temperature is incorporated analytically. It is found that the temperature-dependent radiation angle of Lamb waves is able to compensate for changes in the speed of sound, leading to an (almost) unaffected overall time of flight. This effect is achievable with any fluid and in a wide temperature range. As an example, we discuss a water meter in the range from 0°C to 100°C. The model is validated against temperature and flow rate-dependent measurements obtained on a prototype. The measured data fits well to the developed model and confirms the reduced cross-sensitivity to temperature. Although an in-line meter is considered here, the results extend to clamp-on devices.

Acoustic Limescale Layer and Temperature Measurement in Ultrasonic Flow Meters

Guided acoustic waves are commonly used in domestic water meters to measure the flow rate. The accuracy of this measurement method is affected by factors such as variations in temperature and limescale deposition inside of the pipe. In this work, a new approach using signals from different sound propagation paths is used to determine these quantities and allow for subsequent compensation. This method evaluates the different propagation times of guided Lamb waves in flow measurement applications. A finite element method-based model is used to identify the calibration curves for the device under test. The simulated dependencies on temperature and layer thickness are validated by experimental data. Finally, a test on simulated data with varying temperatures and limescale depositions proves that this method can be used to separate both effects. Based on these values, a flow measurement correction scheme can be derived that provides an improved resolution of guided acoustic wave-based flow meters.

Dynamic Effects and Hydrogen Bonding in Mixed-Halide Perovskite Solar Cell Absorbers

The organic component (methylammonium) of CH₃NH₃PbI_3-xCl_x-based perovskites shows electronic hybridization with the inorganic framework via H-bonding between N and I sites. Femtosecond dynamics induced by core excitation are shown to strongly influence the measured X-ray emission spectra and the resonant inelastic soft X-ray scattering of the organic components. The N K core excitation leads to a greatly increased N-H bond length that modifies and strengthens the interaction with the inorganic framework compared to that in the ground state. The study indicates that excited-state dynamics must be accounted for in spectroscopic studies of this perovskite solar cell material, and the organic-inorganic hybridization interaction suggests new avenues for probing the electronic structure of this class of materials. It is incidentally shown that beam damage to the methylamine component can be avoided by moving the sample under the soft X-ray beam to minimize exposure and that this procedure is necessary to prevent the creation of experimental artifacts.

Local electronic structure of the peptide bond probed by resonant inelastic soft X-ray scattering

Soft X-ray emission spectroscopy and RIXS are used to determine the local electronic structure of the peptide bond.

Site-specific electronic structure of imidazole and imidazolium in aqueous solutions

The electronic structures of aqueous imidazole and imidazolium solutions are studied in an atom- and site-specific fashion using soft X-ray spectroscopy.

Band-Gap Widening at the Cu(In,Ga)(S,Se)2 Surface: A Novel Determination Approach Using Reflection Electron Energy Loss Spectroscopy

Using reflection electron energy loss spectroscopy (REELS), we have investigated the optical properties at the surface of a chalcopyrite-based Cu(In,Ga)(S,Se)2 (CIGSSe) thin-film solar cell absorber, as well as an indium sulfide (InxSy) buffer layer before and after annealing. By fitting the characteristic inelastic scattering cross-section λK(E) to cross sections evaluated by the QUEELS-ε(k,ω)-REELS software package, we determine the surface dielectric function and optical properties of these samples. A comparison of the optical values at the surface of the InxSy film with bulk ellipsometry measurements indicates a good agreement between bulk- and surface-related optical properties. In contrast, the properties of the CIGSSe surface differ significantly from the bulk. In particular, a larger (surface) band gap than for bulk-sensitive measurements is observed, providing a complementary and independent confirmation of earlier photoelectron spectroscopy results. Finally, we derive the inelastic mean free path λ for electrons in InxSy, annealed InxSy, and CIGSSe at a kinetic energy of 1000 eV.

Investigation of the Ionic Hydration in Aqueous Salt Solutions by Soft X-ray Emission Spectroscopy

Understanding the molecular structure of the hydration shells and their impact on the hydrogen bond (HB) network of water in aqueous salt solutions is a fundamentally important and technically relevant question. In the present work, such hydration effects were studied for a series of representative salt solutions (NaCl, KCl, CaCl2, MgCl2, and KBr) by soft X-ray emission spectroscopy (XES) and resonant inelastic soft X-ray scattering (RIXS). The oxygen K-edge XES spectra could be described with three components, attributed to initial state HB configurations in pure water, water molecules that have undergone an ultrafast dissociation initiated by the X-ray excitation, and water molecules in contact with salt ions. The behavior of the individual components, as well as the spectral shape of the latter component, has been analyzed in detail. In view of the role of ions in such effects as protein denaturation (i.e., the Hofmeister series), we discuss the ion-specific nature of the hydration shells and find that the results point to a predominant role of anions as compared to cations. Furthermore, we observe a concentration-dependent suppression of ultrafast dissociation in all salt solutions, associated with a significant distortion of intact HB configurations of water molecules facilitating such a dissociation.

Ion-Solvation-Induced Molecular Reorganization in Liquid Water Probed by Resonant Inelastic Soft X-ray Scattering

The molecular structure of liquid water is susceptible to changes upon admixture of salts due to ionic solvation, which provides the basis of many chemical and biochemical processes. Here we demonstrate how the local electronic structure of aqueous potassium chloride (KCl) solutions can be studied by resonant inelastic soft X-ray scattering (RIXS) to monitor the effects of the ion solvation on the hydrogen-bond (HB) network of liquid water. Significant changes in the oxygen K-edge emission spectra are observed with increasing KCl concentration. These changes can be attributed to modifications in the proton dynamics, caused by a specific coordination structure around the salt ions. Analysis of the spectator decay spectra reveals a spectral signature that could be characteristic of this structure.

Setup for in situ investigation of gases and gas/solid interfaces by soft x-ray emission and absorption spectroscopy

We present a novel gas cell designed to study the electronic structure of gases and gas/solid interfaces using soft x-ray emission and absorption spectroscopies. In this cell, the sample gas is separated from the vacuum of the analysis chamber by a thin window membrane, allowing in situ measurements under atmospheric pressure. The temperature of the gas can be regulated from room temperature up to approximately 600 °C. To avoid beam damage, a constant mass flow can be maintained to continuously refresh the gaseous sample. Furthermore, the gas cell provides space for solid-state samples, allowing to study the gas/solid interface for surface catalytic reactions at elevated temperatures. To demonstrate the capabilities of the cell, we have investigated a TiO2 sample behind a mixture of N2 and He gas at atmospheric pressure.

Enzyme kinetic assays with surface plasmon resonance (BIAcore) based on competition between enzyme and creatinine antibody

A procedure is described which allows the characterization of enzyme by a hybrid approach using an enzyme and an antibody. The presented method is related to the affinity determination of antibodies by the 'affinity in solution' procedure for BlAcore. The antibody is used as an indicator for the concentration of substrate, which is also the antigen. A mixture of enzyme, substrate and antibody is incubated, and an aliquot of this solution is injected periodically into a flowcell containing immobilized substrate, which is bound by the antibody, but not cleaved by the enzyme. The chosen initial concentration of substrate inhibits the binding of antibody to the immobilized substrate by 90%. During the enzymatic reaction, increased amounts of antibody bind to the surface, as the substrate concentration is decreased. With this method, the cleavage of creatinine with creatinine iminohydrolase (6 mU/ml) was monitored for up to 11 h. A recently developed monoclonal antibody against creatinine was used as the indicating protein. For the calculation of enzyme activity, the signals were compared with a calibration curve for inhibition of antibody binding to the chip by creatinine in solution.

Electrochemical immunoassays

Immunoassays (IA) use the specific antigen antibody complexation for analytical purposes. Radioimmunoassays (RIA), fluorescence immunoassays (FIA) and enzyme immunoassays (EIA) are well established in clinical diagnostics. For the development of hand-held devices which can be used for point of care measurements, electrochemical immunoassays are promising alternatives to existing immunochemical tests. Moreover, for opaque or optically dense matrices electrochemical methods are superior. Potentiometric, capacitive and amperometric transducers have been applied for direct and indirect electrochemical immunoassays. However, due to their fast detection, broad linear range and low detection limit, amperometric transducers are preferred. Competitive and noncompetitive amperometric immunoassays have been developed with redox compounds or enzymes as labels. This review will give an overview of the most frequently applied principles in electrochemical immunoassays. The potential of an indirect competitive amperometric immunoassay for the determination of creatinine within nanomolar range and the circumvention of the most serious problem in electrochemical immunoassays, namely regeneration, will be discussed.

Development of a creatinine ELISA and an amperometric antibody-based creatine sensor with a detection limit in the nanomolar range

Creatinine-specific antibodies have been generated and used for highly sensitive and specific immunochemical creatinine determinations. Creatinine was derivatized at N3 and coupled to KLH carrier protein. On the basis of this immunogen, monoclonal antibodies were developed by hybridoma technology. Antibodies from various clones have been characterized with BIAcore 2000 with respect to the dissociation constant and specificity. Antibodies of clone B90-AH5 exhibited the lowest dissociation constant (0.74 microM) and the highest specificity for creatinine and were chosen for the development of a competitive ELISA and an amperometric creatinine sensor. The creatinine sensor was constructed by fixing a creatinine-modified membrane on the top of a platinum working electrode which was then incorporated into a stirred electrochemical measuring cell. For creatinine determination the creatinine-containing sample was incubated with B90-AH5 and anti-IgG(mouse)-glucose oxidase conjugate and applied to the measuring cell. After a washing step glucose was added and the produced hydrogen peroxide was registered at Eappl = +600 mV vs Ag/AgCl. The measuring range was 0.01-10 microg/mL. The highest sensitivity for creatinine was achieved at 330 ng/mL (3 microM) and the lower detection limit at 4.5 ng/mL (40 nM). This is far below the relevant clinical range, which is 5-17 microg/mL (44-150 microM) and allows a reliable determination of very low creatinine concentrations in serum, where standard methods cannot be applied. After each measurement the sensor was regenerated with 10 mM HCl without any loss in binding activity.