Obesity and the Latissimus Dorsi Flap: A Radiologic Study

Introduction: The increasing prevalence of obesity in patients with breast cancer has prompted a reappraisal of the role of the latissimus dorsi flap (LDF) in breast reconstruction. Although the reliability of this flap in obese patients is well-documented, it is unclear whether sufficient volume can be achieved through a purely autologous reconstruction (eg, extended harvest of the subfascial fat layer). Additionally, the traditional combined autologous and prosthetic approach (LDF + expander/implant) is subject to increased implant-related complication rates related to flap thickness in obese patients. The purpose of this study is to provide data on the thicknesses of the various components of the latissimus flap and discuss the implications for breast reconstruction in patients with increasing body mass index (BMI). Methods: Measurements of back thickness in the usual donor site area of an LDF were obtained in 518 patients undergoing prone computed tomography-guided lung biopsies. Thicknesses of the soft tissue overall and of individual layers (e.g., muscle, subfascial fat) were obtained. Patient, demographics including age, gender, and BMI were obtained. Results: A range of BMI from 15.7 to 65.7 was observed. In females, total back thickness (skin, fat, muscle) ranged from 0.6 to 9.4 cm. Every 1-point increase in BMI resulted in an increase of flap thickness by 1.11 mm (adjusted R2 of 0.682, P < .001) and an increase in the thickness of the subfascial fat layer by 0.513 mm (adjusted R2 of 0.553, P < .001). Mean total thicknesses for each weight category were 1.0, 1.7, 2.4, 3.0, 3.6, and 4.5 cm in underweight, normal weight, overweight, and class I, II, III obese individuals, respectively. The average contribution of the subfascial fat layer to flap thickness was 8.2 mm (32%) overall and 3.4 mm (21%), 6.7 mm (29%), 9.0 mm (30%), 11.1 mm (32%), and 15.6 mm (35%) in normal weight, overweight, class I, II, III obese individuals, respectively. Conclusion: The above findings demonstrate that the thickness of the LDF overall and of the subfascial layer closely correlated with BMI. The contribution of the subfascial layer to overall flap thickness tends to increase as a percentage of overall flap thickness with increasing BMI, which is favourable for extended LDF harvests. Because this layer cannot be separated from overall thickness on examination, these results are useful in estimating the amount of additional volume obtained from an extended latissimus harvest technique.

The 5 D's to Dunk the Dog: A Retrospective Clinical Review to Prevent Dog-Ear Contour Abnormalities in Vertical Breast Reductions and Breast Lifts

Background

In 2020, reduction mammoplasties and mastopexies comprised 34.2% of all breast surgeries performed by plastic surgeons. Various approaches for the skin incision of these procedures have been described. The vertical pattern has become an increasingly popular option due to its lower scar burden. However, it is prone to dog-ear formation along the caudal aspect of the incision. Herein, we describe 5 technical steps to eliminate the dog-ear in patients undergoing vertical mammoplasties.

Methods

A retrospective chart review was performed on all patients who underwent vertical breast reduction and mastopexy between the years 2008 and 2020 performed by the senior author. The 5 steps employed in eliminating the dog-ear are delineated and depicted pictorially.

Results

A total of 58 patients and 89 breasts were operated upon. A majority of 66.6% were Caucasian, 33.3% were African American, and 1 patient was of Hispanic descent. The mean age was 53.2 years (19-73 years), and average BMI was 31.5 kg/m² (21.3-42.7 kg/m²). The average resection weights for reduction and mastopexy patients were 479 grams (100-1500 grams) and 58.1 grams (18-100 grams), respectively. Mean follow-up was 10.5 months (1-35 months). Only one patient developed a dog-ear (1.7%) in bilateral breasts (2.2%); however, the patient did not request a revision. Our revision rate over 13 years remained at 0%.

Conclusions

Utilizing these 5 technical steps reduces the risk of dog-ear deformity and thereby diminishes the overall need for revisional surgery in patients undergoing short scar vertical mammoplasties.

Early intramedullary nailing of bilateral femur fractures: who might benefit most?

INTRODUCTION

Identifying which patients can receive immediate intramedullary nailing (IMN) after bilateral femoral shaft fracture may improve health-related quality of life outcomes and decrease healthcare costs. This retrospective study evaluated the perioperative factors that guided emergency department transfer of patients to the operating room (OR) where IMN or temporizing external fixation (TEF) was performed, to the intensive care unit (ICU), or to the orthopedic ward. The hypothesis was that patients referred initially to the OR or to the ICU had more serious co-morbidities, complications, or orthopedic polytrauma, increasing the likelihood that they would benefit from "damage control orthopedics" and TEF use.

METHODS

A Level I Trauma Center database (2010-2020) review identified the records of 23 patients that met study inclusion and exclusion criteria. Most sustained their injury in a motor vehicle accident (87%) and were not wearing a seatbelt.

RESULTS

Patients transferred to the operating room had a greater body mass index and shorter times between admission and surgery. Those transferred to the OR or ICU had higher injury severity scores (ISS), higher arterial blood O₂ partial pressure (paO₂) values on the first post-surgical day, and had more red blood cell unit (RBCU) transfusions during hospitalization. Patients transferred to the ICU more often underwent TEF and had shorter initial surgical procedure duration. Those with pneumothorax, rib fractures, or with other orthopedic comorbidities were more often transferred to the OR or ICU and those with acute complications requiring exploratory laparotomy were transferred to the OR.

CONCLUSIONS

Patients with higher BMI, ISS, greater RBCU transfusion needs, with pneumothorax, rib fractures, or acute complications requiring exploratory laparotomy were more likely to be initially transferred to the OR or ICU. Patients transferred to the orthopedic ward represented a more heterogenous group with greater possibility for benefitting from earlier definitive IMN.

Intramedullary nailing of concurrent ipsilateral fractures of the tibia and femur: primary synchronous nailing versus staged osteosynthesis with temporizing external fixation

INTRODUCTION

The optimal timing to definitive osteosynthesis in the polytraumatized patient remains an unanswered question. Early total care, damage control orthopaedics, and early appropriate care have been described to manage the fractures in these patients, but there is a paucity of literature specific to ipsilateral tibial and femoral fractures. We sought the perioperative outcomes of primary simultaneous intramedullary nailing (IMN) versus temporizing external fixation (EF) of both fractures.

METHODS

A chart review of all patients who sustained fractures of the ipsilateral femur and tibia that were definitively treated with (IMN) from January 2010 to December 2020 was performed. Patients who underwent initial EF and those that were primarily treated with IMNs were examined.

RESULTS

IMNs and EF were the initial treatment in 23 and 16 patients, respectively. The mean (range) injury severity score (ISS) was 23.3 (33) in the EF group vs. 18.5 (34) in the IMN group, (p = 0.0686). The EF group had a higher total transfused units of packed red blood cells 7.4 vs. 2.8, the mean initial operative time was 236 vs. 282.6 (min), (p = 0.7399), a longer mean total operative time 601.78 vs. 236 (min), and longer mean length of stay 15.6 vs. 11 (days), (p < 0.5). Rates of complications were not significantly different between groups.

CONCLUSION

Primary IMN is as safe as provisional EF in the adequately resuscitated patient with ipsilateral femoral and tibial fractures. This implies the fixation of both fractures into a single surgery without increasing perioperative complications, and decreasing total hospital stay in patients with sufficient preoperative resuscitation.

Restoring Breast Volume in High BMI Patients: A Single-Center Review of Breast Reconstruction Using Hyperinflated Saline Implants

BACKGROUND

Breast reconstruction in the obese patient is often fraught with poor patient satisfaction due to inadequate volume restoration. The off-label hyperinflation of saline implants is a direct yet controversial solution to this problem, with limited studies in the literature. This study sought to determine the safety and efficacy of this technique for breast reconstruction.

METHODS

A retrospective chart review was performed to identify all patients with a body mass index (BMI) greater than or equal to 30 kg/m2 who underwent breast reconstruction between the years 2013 to 2020 with saline implants filled beyond the manufacturer's maximum recommended volume.

RESULTS

The 21 patients identified had an average age of 49 years. The mean BMI was 39.5 kg/m2. A total of 42 implants were placed; 34 were 800 mL, 4 were 750 mL, and 4 were 700 mL. The average overfill volume was 302 mL (138%). Mean follow-up was 65.0 months. Of these, 1 (4.8%) patient with a history of chest wall radiotherapy underwent reoperation for unilateral implant exposure 27 days after the index procedure, no patient sustained spontaneous leak or rupture, and 1 patient had unilateral deflation following emergent central line and pacemaker placement 2 years after the implant was placed for an unrelated cardiovascular event.

CONCLUSIONS

Hyperinflation of saline implants beyond the maximum recommended volume may be considered for volume replacement in obese patients undergoing implant-based breast reconstruction. This practice is well tolerated, has a complication rate comparable to using implants filled to the recommended volume, and has the potential to restore lost breast volume in the obese patient post mastectomy.

3D-printed titanium cages without bone graft outperform PEEK cages with autograft in an animal model

BACKGROUND CONTEXT

Modernization of 3D printing has allowed for the production of porous titanium interbody cages (3D-pTi) which purportedly optimize implant characteristics and increase osseointegration; however, this remains largely unstudied in vivo.

PURPOSE

To compare osseointegration of three-dimensional (3D) titanium cages without bone graft and Polyether-ether-ketone (PEEK) interbody cages with autologous iliac crest bone graft (AICBG).

STUDY DESIGN

Animal study utilizing an ovine in vivo model of lumbar fusion.

METHODS

Interbody cages of PEEK or 3D-pTi supplied by Spineart SA (Geneva, Switzerland) were implanted in seven living sheep at L2-L3 and L4-L5, leaving the intervening disc space untreated. Both implant materials were used in each sheep and randomized to the aforementioned disc spaces. Computed tomography (CT) was obtained at 4 weeks and 8 weeks. MicroCT and histological sections were obtained to evaluate osseointegration.

RESULTS

MicroCT demonstrated osseous in-growth of native cancellous bone in the trabecular architecture of the 3D-pTi interbody cages and no interaction between the PEEK cages with the surrounding native bone. Qualitative histology revealed robust osseointegration in 3D-pTi implants and negligible osseointegration with localized fibrosis in PEEK implants. Evidence of intramembranous and endochondral ossification was apparent with the 3D-pTi cages. Quantitative histometric bone implant contact demonstrated significantly more contact in the 3D-pTi implants versus PEEK (p<.001); region of interest calculations also demonstrated significantly greater osseous and cartilaginous interdigitation at the implant-native bone interface with the 3D-pTi cages (p=.008 and p=.015, respectively).

CONCLUSIONS

3D-pTi interbody cages without bone graft outperform PEEK interbody cages with AICBG in terms of osseointegration at 4 and 8 weeks postoperatively in an ovine lumbar fusion model.

CLINICAL SIGNIFICANCE

3D-pTi interbody cages demonstrated early and robust osseointegration without any bone graft or additive osteoinductive agents. This may yield early stability in anterior lumbar arthrodesis and potentially bolster the rate of successful fusion. This could be of particular advantage in patients with spinal neoplasms needing post-ablative arthrodesis, where local autograft use would be ill advised.

Posterior Interosseous Nerve Graft: Utilizing External Landmarks and Anthropometric Ratios to Predict Available Length for Digital Nerve Reconstruction in a Cadaveric Study

Objective:

In digital nerve defects that require grafting, autografts remain the efficacious option. The sensory posterior interosseous nerve (PIN) is an ideal choice as it is of similar caliber to digital nerves and leaves no donor morbidity upon resection. However, a finite length of harvestable PIN exists, and considerable variations of this length have been reported in the literature. There exists no predictive model to estimate this length. We sought to determine a method to accurately predict the available length of PIN based on individual patient anthropometry.

Methods:

A cadaveric dissection study was performed in a fresh tissue laboratory. The length of the sensory branch of the PIN and various anthropometric measurements were made in respect to surface anatomy of the ulna to develop a predictable ratio for available PIN donor graft.

Results:

A total of 16 specimens were obtained. On average the length of the PIN was 5.7 cm (range: 3.3-9. cm) and the length of the ulna was 25.7 cm (range: 23.5-30.6 cm). The ratio of PIN to ulnar length was 0.222 ( r = 0.4651). Using one-fifth the length of the ulna, the mean predicted length of the PIN was 5.14 cm (range: 4.7-6.1 cm). On univariate analysis, there was no significant difference between the measured and predicted PIN length ( P = .249).

Conclusion:

An anthropometric ratio predicated on reproducible surface anatomy of the ulna is a useful tool in predicting the sensory PIN length. Such a prediction may be a useful in guiding patient discussions concerning surgical options for digital nerve reconstruction.

Cannabinoids and orthopedic surgery: a systematic review of therapeutic studies

Background

Recent work has shed light on the potential benefits of cannabinoids for multimodal pain control following orthopedic procedures. The objective of this review was to summarize the available evidence of analgesic and opioid-sparing effects cannabinoids have in orthopedic surgery and identify adverse events associated with their use.

Methods

A systematic review of the literature using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines including PubMed, EMBASE, MEDLINE, PsycINFO, and Google Scholar was performed to include all primary, therapeutic studies published on the use of cannabis, and cannabis-derived products in orthopedic surgery.

Results

The literature review returned 4292 citations. Thirteen publications were found to meet inclusion criteria. Four randomized controlled trials were evaluated while the remaining studies were of quasi-experimental design.

Conclusion

Research on cannabinoids in orthopedic surgery is mostly of a quasi-experimental nature and is mainly derived from studies where orthopedics was not the primary focus. The overall results demonstrate potential usefulness of cannabinoids as adjunctive analgesics and in mitigating opioid use. However, the current evidence is far from convincing. There is a need to produce rigorous evidence with well-designed randomized controlled trials specific to orthopedic surgery to further establish these effects.

Anatomic surface landmarks to guide injection for posterior interosseous nerve block

Proper injection of the posterior interosseous nerve (PIN) is important for both the therapeutic and diagnostic management of wrist pain. However, no anatomical study exists describing the site of injection based on individual wrist width. We sought to develop a reproducible anthropometric ratio utilizing external wrist surface anatomy to predict a safe and accurate injection site for the PIN. Fresh frozen cadaver forearms were dissected at the University of Louisville tissue lab. Several anthropometric measurements were obtained in order to develop a reproducible ratio to calculate location of injection. A total of 16 cadaver forearms of equal male to female ratio were obtained. On average, the male forearm had a greater mean wrist circumference obtained at the level of Lister's tubercle compared to female forearms, 17.1 cm vs. 13.5 cm. An injection given ulnar to proximal edge of Lister's tubercle at a length of one-fourth the distance between Lister's tubercle and radial aspect of ulnar styloid resulted in 100% accurate perineural injection without intraneural injection. An anthropometric ratio of one-fourth the distance from Lister's tubercle to the ulnar styloid was able to predict accurate injection sites for the distal PIN in cadaveric specimens of varying anatomical proportions.