Remote Detection of HCN, HF, and Nerve Agent Vapors Based on Self-Referencing, Dye-Impregnated Porous Silicon Photonic Crystals

A one-dimensional photonic crystal is prepared from porous silicon (pSi) and impregnated with a chemically specific colorimetric indicator dye to provide a self-referenced vapor sensor for the selective detection of hydrogen fluoride (HF), hydrogen cyanide (HCN), and the chemical nerve agent diisopropyl fluorophosphate (DFP). The photonic crystal is prepared with two stop bands: one that coincides with the optical absorbance of the relevant activated indicator dye and the other in a spectrally "clear" region, to provide a reference. The inner pore walls of the pSi sample are then modified with octadecylsilane to provide a hydrophobic interior, and the indicator dye of interest is then loaded into the mesoporous matrix. Remote analyte detection is achieved by measurement of the intensity ratio of the two stop bands in the white light reflectance spectrum, which provides a means to reliably detect colorimetric changes in the indicator dye. Indicator dyes were chosen for their specificity for the relevant agents: rhodamine-imidazole (RDI) for HF and DFP, and monocyanocobinamide (MCbi) for HCN. The ratiometric readout allows detection of HF and HCN at concentrations (14 and 5 ppm, respectively) that are below their respective IDLH (immediately dangerous to life and health) concentrations (30 ppm for HF; 50 ppm for HCN); detection of DFP at a concentration of 114 ppb is also demonstrated. The approach is insensitive to potential interferents such as ammonia, hydrogen chloride, octane, and the 43-component mixture of VOCs known as EPA TO-14A, and to variations in relative humidity (20-80% RH). Detection of HF and HCN spiked into the complex mixture EPA TO-14A is demonstrated. The approach provides a general means to construct robust remote detection systems for chemical agents.

High-Throughput Screening of MOFs for Breakdown of V-Series Nerve Agents

Metal-organic frameworks (MOFs) have shown promise for the catalytic decomposition of chemical weapons. Finding the best materials for the degradation of nerve agents requires the ability to screen a high number of samples and elucidate the key parameters of effective catalysis. In this work, a high-throughput screening (HTS) method has been developed to evaluate MOFs as catalysts, specifically against the V-class of nerve agents. Over 100 MOFs have been tested using the V-class simulant, O,O-diethyl S-phenyl phosphorothioate (DEPPT), revealing good activity for some UiO-66 derivatives. A medium-throughput hydrolysis assay for the nerve agent O-ethyl S-[2-(diisopropylamino)ethyl]methylphosphonothioate (VX) was also performed using six MOFs selected from HTS and was validated by ³¹P NMR. The results demonstrated that the DEPPT-based assay is a good indicator of V-series agent reactivity and should be considered in addition to the common (4-nitrophenyl)phosphate (DMNP) assay that is used for G-series agents.

Propylene Enrichment via Kinetic Vacuum Pressure Swing Adsorption Using ZIF-8 Fiber Sorbents

This work presents the synthesis, characterization, and implementation of ZIF-8/cellulose acetate fiber sorbents for the cyclic kinetic adsorption separation of an equimolar propane/propylene feed. These fiber sorbents are packed as structured mass-transfer contactors and employed in a two-bed vacuum pressure swing adsorption cycle without propylene product purge. The unoptimized adsorption cycle process produces a high-pressure product of up to 81% propane purity at 31% recovery at 0 °C. The effects of adsorption step time, temperature, and feed rate are investigated and presented as a purity/recovery trade-off. This work represents the first successful demonstration of a metal-organic framework fiber sorbent in a pressure swing adsorption cycle and the first use of metal-organic frameworks in a kinetic separation cycle.

Zeolitic imidazolate frameworks: next-generation materials for energy-efficient gas separations

Industrial separation processes comprise approximately 10% of the global energy demand, driven largely by the utilization of thermal separation methods (e.g., distillation). Significant energy and cost savings can be realized using advanced separation techniques such as membranes and sorbents. One of the major barriers to acceptance of these techniques remains creating materials that are efficient and productive in the presence of aggressive industrial feeds. One promising class of emerging materials is zeolitic imidazolate frameworks (ZIFs), an important thermally and chemically stable subclass of metal organic frameworks (MOFs). The objectives of this paper are (i) to provide a current understanding of the synthetic methods that enable the immense tunability of ZIFs, (ii) to identify areas of success and areas for improvement when ZIFs are used as adsorbents, (iii) to identify areas of success and areas for improvement in ZIF membranes. A review is given of the state-of-the-art in ZIF synthesis procedures and novel ZIF formation pathways as well as their application in energy efficient separations.