Influence of substrate aggregation state on the enzymatic-induced crosslinking of soy protein isolate

Transglutaminase (TGase) induced-crosslinking of soy protein isolate (SPI) was markedly influenced by the substrate aggregation state. Results showed that appropriate heating significantly accelerated the TGase crosslinking, and the 7S and 11S acidic subunits were more susceptible to the enzyme than the 11S basic proteins. The content of ε-(γ-glutamyl)-lysine isopeptide bonds increased from 4.74 to 8.61 μmol/g protein when the heating intensity was increased from 75 °C for 15 min to 95 °C for 30 min, due to sufficient unfolding of the protein structure. Rheological data indicated that the gel formed from the SPI heated at 95 °C for 30 min exhibited the best properties, with a 60 % increase in the storage modulus compared with the unheated sample. However, excessive heating (95 °C, 60-120 min) caused severe aggregation of SPI and formation of insoluble aggregates, resulting in poor crosslinking efficiency and weaker gel properties.

Enhancement of fluorescence emission difference microscopy using conjugated vortex phase modulation

In this paper, we propose and demonstrate an improved fluorescence emission difference microscopy (FED) method, exploiting programmable phase modulation for image enhancement. The main novelty of the proposed approach lies in the matched size and intensity of two excitation spots. The proposed method improves the FED performance on image quality via artefact elimination. We demonstrate the feasibility of this method through theoretical studies and experimental tests. The experimental results of nanobeads and cells validate the practical performance of this method, which can enable reliable observations at superresolution in biomedical studies. LAY DESCRIPTION: In this paper, we propose a method to improve the imaging quality of regular fluorescence emission difference (FED) microscopy. In regular FED imaging, a solid and a doughnut excitation beam are successively used to acquire two images which are then subtracted with each other to improve the resolution of confocal microscopy. The doughnut beam can be generated by modulating the excitation beam with a vortex phase mask. Note that both of the excitation beam and the vortex phase mask must have the same handed direction in regular FED microscopy. However, some negative values may be produced and some information may be lost due to the subtraction process in regular FED imaging, which is mainly caused by the mismatched size and intensity of these two excitation spots. To address this issue, we propose conjugated FED (cFED) microscopy which additionally uses a conjugated vortex phase mask to modulate the solid beam to extend its focal spot size to be matched with the doughnut spot, which means the handed direction of the solid beam and the vortex phase mask is different. Besides, in order not to damage the resolution, the doughnut beam needs to be saturated to some degree. The experiment results show that, at the same resolution level, the negative values and the information loss in cFED image are all less than that of regular FED image.

Recent research on stimulated emission depletion microscopy for reducing photobleaching

Stimulated emission depletion (STED) microscopy is a useful tool in investigation for super-resolution realm. By silencing the peripheral fluorophores of the excited spot, leaving only the very centre zone vigorous for fluorescence, the effective point spread function (PSF) could be immensely squeezed and subcellular structures, such as organelles, become discernable. Nevertheless, because of the low cross-section of stimulated emission and the short fluorescence lifetime, the depletion power density has to be extremely higher than the excitation power density and molecules are exposed in high risk of photobleaching. The existence of photobleaching greatly limits the research of STED in achieving higher resolution and more delicate imaging quality, as well as long-term and dynamic observation. Since the first experimental implementation of STED microscopy, researchers have lift out variety of methods and techniques to alleviate the problem. This paper would present some researches via conventional methods which have been explored and utilised relatively thoroughly, such as fast scanning, time-gating, two-photon excitation (TPE), triplet relaxation (T-Rex) and background suppression. Alternatively, several up-to-date techniques, especially adaptive illumination, would also be unveiled for discussion in this paper. The contrast and discussion of these modalities would play an important role in ameliorating the research of STED microscopy.

Analogous on-axis interference topographic phase microscopy (AOITPM)

The refractive index (RI) of a sample as an endogenous contrast agent plays an important role in transparent live cell imaging. In tomographic phase microscopy (TPM), 3D quantitative RI maps can be reconstructed based on the measured projections of the RI in multiple directions. The resolution of the RI maps not only depends on the numerical aperture of the employed objective lens, but also is determined by the accuracy of the quantitative phase of the sample measured at multiple scanning illumination angles. This paper reports an analogous on-axis interference TPM, where the interference angle between the sample and reference beams is kept constant for projections in multiple directions to improve the accuracy of the phase maps and the resolution of RI tomograms. The system has been validated with both silica beads and red blood cells. Compared with conventional TPM, the proposed system acquires quantitative RI maps with higher resolution (420 nm @λ = 633 nm) and signal-to-noise ratio that can be beneficial for live cell imaging in biomedical applications.

Image scanning fluorescence emission difference microscopy based on a detector array

We propose a novel imaging method that enables the enhancement of three-dimensional resolution of confocal microscopy significantly and achieve experimentally a new fluorescence emission difference method for the first time, based on the parallel detection with a detector array. Following the principles of photon reassignment in image scanning microscopy, images captured by the detector array were arranged. And by selecting appropriate reassign patterns, the imaging result with enhanced resolution can be achieved with the method of fluorescence emission difference. Two specific methods are proposed in this paper, showing that the difference between an image scanning microscopy image and a confocal image will achieve an improvement of transverse resolution by approximately 43% compared with that in confocal microscopy, and the axial resolution can also be enhanced by at least 22% experimentally and 35% theoretically. Moreover, the methods presented in this paper can improve the lateral resolution by around 10% than fluorescence emission difference and 15% than Airyscan. The mechanism of our methods is verified by numerical simulations and experimental results, and it has significant potential in biomedical applications.