NaGaPO4F - a KTiOPO4-structured solid sodium-ion conductor

Advanced ionic conductors are crucial for a large variety of contemporary technologies spanning solid state ion batteries, fuel cells, gas sensors, water desalination, etc. In this work, we report on a new member of KTiOPO4-structured materials, NaGaPO4F, with sodium-ion conductivity. NaGaPO4F has been obtained for the first time via a facile two-step synthesis consisting of a hydrothermal preparation of an ammonia-based precursor, NH4GaPO4F, followed by an ion exchange reaction with NaNO3. Its crystal structure was precisely refined using a combination of synchrotron X-ray powder diffraction and electron diffraction tomography. The material is thermally stable upon 450 °C showing no significant structural transformations or degradation but only a ∼1% cell volume expansion. Na-ion mobility in NaGaPO4F was investigated by a joint experimental and computational approach comprising solid-state nuclear magnetic resonance (NMR) and density functional theory (DFT). DFT and bond-valence site energy (BVSE) calculations reveal 3D diffusion of sodium in the [GaPO4F] framework with migration barriers amounting to 0.22 and 0.44 eV, respectively, while NMR yields 0.3-0.5 eV that, being coupled with a calculated bandgap of ∼4.25 eV, makes NaGaPO4F a promising fast Na-ion conductor.

Thermodynamics as a Driving Factor of LiCoO2 Grain Growth on Nanocrystalline Ta-LLZO Thin Films for All-Solid-State Batteries

All-solid-state batteries primarily focus on macrocrystalline solid electrolyte/cathode interfaces, and little is explored on the growth and stability of nanograined Li-garnet and cathode ones. In this work, a thin (∼500 nm) film of LiCoO₂ (LCO) has been grown on top of the polycrystalline layer of Ta-doped Li₇La₃Zr₂O₁₂ (Ta-LLZO) solid electrolyte using the pulsed laser deposition (PLD) technique. Scanning transmission electron microscopy, electron diffraction, and electron tomography demonstrated that the LCO film is formed by columnar elements with the shape of inverted cones. The film appears to be highly textured, with the (003) LCO crystal planes parallel to the LCO/Ta-LLZO interface and with internal pores shaped by the {104} and {102} planes. According to density functional theory (DFT) calculations, this specific microstructure is governed by a competition between free energies of the corresponding crystal planes, which in turn depends on the oxygen and lithium chemical potentials during the deposition, indicating that thermodynamics plays an important role in the resulting LCO microstructure even under nonequilibrium PLD conditions. Based on the thermodynamic estimates, the experimental conditions within the LCO stability domain are proposed for the preferential {104} LCO orientation, which is considered favorable for enhanced Li diffusion in the positive electrode layers of all-solid-state batteries.

Chemistry, Local Molybdenum Clustering, and Electrochemistry in the Li2+xMo1-xO3 Solid Solutions

A broad range of cationic nonstoichiometry has been demonstrated for the Li-rich layered rock-salt-type oxide Li₂MoO₃, which has generally been considered as a phase with a well-defined chemical composition. Li_2+xMo_1-xO₃ (-0.037 ≤ x ≤ 0.124) solid solutions were synthesized via hydrogen reduction of Li₂MoO₄ in the temperature range of 650-1100 °C, with x decreasing with the increase of the reduction temperature. The solid solutions adopt a monoclinically distorted O3-type layered average structure and demonstrate a robust local ordering of the Li cations and Mo₃ triangular clusters within the mixed Li/Mo cationic layers. The local structure was scrutinized in detail by electron diffraction and aberration-corrected scanning transmission electron microcopy (STEM), resulting in an ordering model comprising a uniform distribution of the Mo₃ clusters compatible with local electroneutrality and chemical composition. The geometry of the triangular clusters with their oxygen environment (Mo₃O₁₃ groups) has been directly visualized using differential phase contrast STEM imaging. The established local structure was used as input for density functional theory (DFT)-based calculations; they support the proposed atomic arrangement and provide a plausible explanation for the staircase galvanostatic charge profiles upon electrochemical Li⁺ extraction from Li_2+xMo_1-xO₃ in Li cells. According to DFT, all electrochemical capacity in Li_2+xMo_1-xO₃ solely originates from the cationic Mo redox process, which proceeds via oxidation of the Mo₃ triangular clusters into bent Mo₃ chains where the electronic capacity of the clusters depends on the initial chemical composition and Mo oxidation state defining the width of the first charge low-voltage plateau. Further oxidation at the high-voltage plateau proceeds through decomposition of the Mo₃ chains into Mo₂ dimers and further into individual Mo⁶⁺ cations.

Charge storage mechanisms of a π–d conjugated polymer for advanced alkali-ion battery anodes

Charge storage mechanisms of NiBTA, a 1D π–d conjugated polymer derived from benzenetetramine, are studied in Li-, Na- and K-based batteries with a set of advanced experimental and computational methods.

Revisited Ti2Nb2O9 as an Anode Material for Advanced Li-Ion Batteries

Ti₂Nb₂O₉ with a tunnel-type structure is considered as a perspective negative electrode material for Li-ion batteries (LIBs) with theoretical capacity of 252 mAh g^-1 corresponding to one-electron reduction/oxidation of Ti and Nb, but only ≈160 mAh g^-1 has been observed practically. In this work, highly reversible capacity of 200 mAh g^-1 with the average (de)lithiation potential of 1.5 V vs Li/Li⁺ is achieved for Ti₂Nb₂O₉ with pseudo-2D layered morphology obtained via thermal decomposition of the NH₄TiNbO₅ intermediate prepared by K⁺→ H⁺→ NH₄⁺ cation exchange from KTiNbO₅. Using operando synchrotron powder X-ray diffraction (SXPD), single-phase (de)lithiation mechanism with 4.8% unit cell volume change is observed. Operando X-ray absorption near-edge structure (XANES) experiment revealed simultaneous Ti⁴⁺/Ti³⁺ and Nb⁵⁺/Nb⁴⁺ reduction/oxidation within the whole voltage range. Li⁺ migration barriers for Ti₂Nb₂O₉ along [010] direction derived from density functional theory (DFT) calculations are within the 0.15-0.4 eV range depending on the Li content that is reflected in excellent C-rate capacity retention. Ti₂Nb₂O₉ synthesized via the ion-exchange route appears as a strong contender to widely commercialized Ti-based negative electrode material Li₄Ti₅O₁₂ in the next generation of high-performance LIBs.

α-TiPO4 as a Negative Electrode Material for Lithium-Ion Batteries

To realize high-power performance, lithium-ion batteries require stable, environmentally benign, and economically viable noncarbonaceous anode materials capable of operating at high rates with low strain during charge-discharge. In this paper, we report the synthesis, crystal structure, and electrochemical properties of a new titanium-based member of the MPO₄ phosphate series adopting the α-CrPO₄ structure type. α-TiPO₄ has been obtained by thermal decomposition of a novel hydrothermally prepared fluoride phosphate, NH₄TiPO₄F, at 600 °C under a hydrogen atmosphere. The crystal structure of α-TiPO₄ is refined from powder X-ray diffraction data using a Rietveld method and verified by electron diffraction and high-resolution scanning transmission electron microscopy, whereas the chemical composition is confirmed by IR, energy-dispersive X-ray, electron paramagnetic resonance, and electron energy loss spectroscopies. Carbon-coated α-TiPO₄/C demonstrates reversible electrochemical activity ascribed to the Ti³⁺/Ti²⁺ redox transition delivering 125 mAh g^-1 specific capacity at C/10 in the 1.0-3.1 V versus Li⁺/Li potential range with an average potential of ∼1.5 V, exhibiting good rate capability and stable cycling with volume variation not exceeding 0.5%. Below 0.8 V, the material undergoes a conversion reaction, further revealing capacitive reversible electrochemical behavior with an average specific capacity of 270 mAh g^-1 at 1C in the 0.7-2.9 V versus Li⁺/Li potential range. This work suggests a new synthesis route to metastable titanium-containing phosphates holding prospective to be used as negative electrode materials for metal-ion batteries.

Hydroxyl Defects in LiFePO4 Cathode Material: DFT+U and an Experimental Study

Lithium iron phosphate, LiFePO₄, a widely used cathode material in commercial Li-ion batteries, unveils a complex defect structure, which is still being deciphered. Using a combined computational and experimental approach comprising density functional theory (DFT)+U and molecular dynamics calculations and X-ray and neutron diffraction, we provide a comprehensive characterization of various OH point defects in LiFePO₄, including their formation, dynamics, and localization in the interstitial space and at Li, Fe, and P sites. It is demonstrated that one, two, and four (five) OH groups can effectively stabilize Li, Fe, and P vacancies, respectively. The presence of D (H) at both Li and P sites for hydrothermally synthesized deuterium-enriched LiFePO₄ is confirmed by joint X-ray and neutron powder diffraction structure refinement at 5 K that also reveals a strong deficiency of P of 6%. The P occupancy decrease is explained by the formation of hydrogarnet-like P/4H and P/5H defects, which have the lowest formation energies among all considered OH defects. Molecular dynamics simulation shows a rich structural diversity of these defects, with OH groups pointing both inside and outside vacant P tetrahedra creating numerous energetically close conformers, which hinders their explicit localization with diffraction-based methods solely. The discovered conformers include structural water molecules, which are only by 0.04 eV/atom H higher in energy than separate OH defects.

Monoclinic α-Na2FePO4F with Strong Antisite Disorder and Enhanced Na+ Diffusion

A new monoclinic α-polymorph of the Na₂FePO₄F fluoride-phosphate has been directly synthesized via a hydrothermal method for application in metal-ion batteries. The crystal structure of the as-prepared α-Na₂FePO₄F studied with powder X-ray and neutron diffraction (P2₁/c, a = 13.6753(10) Å, b = 5.2503(2) Å, c = 13.7202(8) Å, β = 120.230(4)°) demonstrates strong antisite disorder between the Na and Fe atoms. As revealed with DFT-based calculations, α-Na₂FePO₄F has low migration barriers for Na⁺ along the main pathway parallel to the b axis, and an additional diffusion bypass allowing the Na⁺ cations to go around the Na/Fe antisite defects. These results corroborate with the extremely high experimental Na-ion diffusion coefficient of (1-5)·10^-11 cm²·s^-1, which is 2 orders of magnitude higher than that for the orthorhombic β-polymorph ((5-10)·10^-13 cm²·s^-1). Being tested as a cathode material in Na- and Li-ion battery cells, monoclinic α-Na₂FePO₄F exhibits a reversible specific capacity of 90 and 80 mAh g^-1, respectively.

Titanium-based potassium-ion battery positive electrode with extraordinarily high redox potential

The rapid progress in mass-market applications of metal-ion batteries intensifies the development of economically feasible electrode materials based on earth-abundant elements. Here, we report on a record-breaking titanium-based positive electrode material, KTiPO4F, exhibiting a superior electrode potential of 3.6 V in a potassium-ion cell, which is extraordinarily high for titanium redox transitions. We hypothesize that such an unexpectedly major boost of the electrode potential benefits from the synergy of the cumulative inductive effect of two anions and charge/vacancy ordering. Carbon-coated electrode materials display no capacity fading when cycled at 5C rate for 100 cycles, which coupled with extremely low energy barriers for potassium-ion migration of 0.2 eV anticipates high-power applications. Our contribution shows that the titanium redox activity traditionally considered as "reducing" can be upshifted to near-4V electrode potentials thus providing a playground to design sustainable and cost-effective titanium-containing positive electrode materials with promising electrochemical characteristics.

Crystal Structures and Low-Dimensional Ferromagnetism of Sodium Nickel Phosphates Na5Ni2(PO4)3·H2O and Na6Ni2(PO4)3OH

Two new sodium nickel phosphates, Na₅Ni₂(PO₄)₃·H₂O (I) and Na₆Ni₂(PO₄)₃OH (II), have been synthesized hydrothermally and characterized by synchrotron X-ray diffraction, electron diffraction, low-temperature thermodynamic and magnetic measurements, and ab initio calculations. Unlike the majority of Ni²⁺ compounds, I and II show predominant ferromagnetic exchange couplings. I crystallizes in the monoclinic space group P2₁/ n ( a = 14.0395(4) Å, b = 5.1847(14) Å, c = 16.4739(4) Å, β = 110.4186(14)°) and features chains of ferromagnetically coupled Ni²⁺ ions. In II with the orthorhombic space group Pcmb ( a = 7.5007(15) Å, b = 21.4661(4) Å, c = 7.1732(15) Å), the ferromagnetically coupled Ni²⁺ ions form dimers arranged on a spin ladder. Both compounds represent rare examples of quasi-one-dimensional ferromagnets. Structural features behind this unusual magnetic behavior are discussed.

The impact of carbon and oxygen in alpha-titanium: ab initio study of solution enthalpies and grain boundary segregation

The solution, grain boundary (GB) segregation, and co-segregation of carbon and oxygen atoms in α-titanium are studied using density functional theory. For five titanium tilt boundaries, including T1, T2, and C1 twin systems, we determine the GB structure, as well as GB energy and excess volume. The segregation energies and volumes of carbon and oxygen are calculated for 23 inequivalent interstitial voids, while for co-segregation 75 configurations are considered. It is obtained that depending on the type of the segregation void both a positive and a negative segregation process is possible. The physical reasons of segregation are explained in terms of the analysis of the void atomic geometry, excess volume and features of the electronic structure at the Fermi level. Although carbon and oxygen show qualitatively similar properties in α-Ti, several distinctions are observed for their segregation behavior and mutual interactions.