Catalytic HF Shuttling between Fluoroalkanes and Alkynes

In this paper, we report BF3  ⋅ OEt2 as a catalyst to shuttle equivalents of HF from a fluoroalkane to an alkyne. Reactions of terminal and internal aliphatic alkynes led to formation of difluoroalkane products, while diarylalkynes can be selectively converted into fluoroalkenes. The method tolerates numerous sensitive functional groups including halogen, protected amine, ester and thiophene substituents. Mechanistic studies (DFT, probe experiments) suggest the catalyst is involved in both the defluorination and fluorination steps, with BF3 acting as a Lewis acid and OEt2 a weak Lewis base that mediates proton transfer. In certain cases, the interconversion of fluoroalkene and difluoroalkane products was found to be reversible. The new catalytic system was applied to demonstrate proof-of-concept recycling of poly(vinylidene difluoride).

Stereoselective insertion of cyclopropenes into Mg-Mg bonds

The reaction of cyclopropenes with compounds containing Mg-Mg bonds is reported. 1,2-Dimagnesiation occurs exclusively by syn-addition to the least hindered face of the alkene forming a single diastereomeric product. DFT calculations support a concerted and stereoselective mechanism. These findings shed new light on the stereochemistry of reactions involving magnesium reagents.

Alumination of aryl methyl ethers: switching between sp2 and sp3 C-O bond functionalisation with Pd-catalysis

The reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) with aryl methyl ethers proceeded with alumination of the sp³ C-O bond. The selectivity of this reaction could be switched by inclusion of a catalyst. In the presence of [Pd(PCy₃)₂], chemoselective sp² C-O bond functionalisation was observed. Kinetic isotope experiments and DFT calculations support a catalytic pathway involving the ligand-assisted oxidative addition of the sp² C-O bond to a Pd-Al intermetallic complex.

Palladium-catalysed C-F alumination of fluorobenzenes: mechanistic diversity and origin of selectivity

A palladium pre-catalyst, [Pd(PCy₃)₂] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(i) reagent [{(ArNCMe)₂CH}Al] (1, Ar = 2,6-di-iso-propylphenyl). The catalytic protocol results in the transformation of sp² C–F bonds to sp² C–Al bonds and provides a route to reactive organoaluminium complexes (2a–h) from fluorocarbons. The catalyst is highly active. Reactions proceed within 5 minutes at 25 °C (and at appreciable rates at even −50 °C) and the scope includes low-fluorine-content substrates such as fluorobenzene, difluorobenzenes and trifluorobenzenes. The reaction proceeds with complete chemoselectivity (C–F vs. C–H) and high regioselectivities (>90% for C–F bonds adjacent to the most acidic C–H sites). The heterometallic complex [Pd(PCy₃)(1)₂] was shown to be catalytically competent. Catalytic C–F alumination proceeds with a KIE of 1.1–1.3. DFT calculations have been used to model potential mechanisms for C–F bond activation. These calculations suggest that two competing mechanisms may be in operation. Pathway 1 involves a ligand-assisted oxidative addition to [Pd(1)₂] and leads directly to the product. Pathway 2 involves a stepwise C–H → C–F functionalisation mechanism in which the C–H bond is broken and reformed along the reaction coordinate, guiding the catalyst to an adjacent C–F site. This second mechanism explains the experimentally observed regioselectivity. Experimental support for this C–H activation playing a key role in C–F alumination was obtained by employing [{(MesNCMe)₂CH}AlH₂] (3, Mes = 2,4,6-tri-methylphenyl) as a reagent in place of 1. In this instance, the kinetic C–H alumination intermediate could be isolated. Under catalytic conditions this intermediate converts to the thermodynamic C–F alumination product.

A palladium pre-catalyst, [Pd(PCy₃)₂] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(i) reagent [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl).

Catalyst control of selectivity in the C-O bond alumination of biomass derived furans

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp² C–O bond into a sp² C–Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH^‡ = +19.7 (±2.7) kcal mol⁻¹, ΔS^‡ = −18.8 (±7.8) cal K⁻¹ mol⁻¹ and ΔG^‡_{298 K} = +25.3 (±0.5) kcal mol⁻¹ and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp² C–O bond through population of the σ*-orbital. Inclusion of [Pd(PCy₃)₂] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C–O bond that breaks is that adjacent to the sp²C–H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)₂CH}AlH₂] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C–O bond functionalisation occurs via an initial C–H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C–H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C–H bond to the palladium catalyst. Isomerisation of the kinetic C–H aluminated product to the thermodynamic C–O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy₃)₂]. DFT calculations suggest that the key C–O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle.

Breaking Carbon–Fluorine Bonds with Main Group Nucleophiles

In this Account we describe a series of new reactions that we, and others, have reported that involve the transformation of C–F bonds into C–Mg, C–Al, C–Si, C–Fe and C–Zn bonds. We focus on the use of highly reactive main group nucleophiles and discuss aspects of reaction scope, selectivity and mechanism.

1 Introduction

1.1 The Fluorocarbon Industry and Sustainability

1.2 Production of Fluorocarbons

1.3 Properties of Fluorocarbons

1.4 Our Work

2 Results and Discussion

2.1 Low-Valent Main Group Compounds

2.1.1 Reactions with Fluoroarenes

2.1.2 Reactions with Fluoroalkanes

2.1.3 Reactions with Fluoroalkenes

2.2 Main Group Nucleophiles (M1–M2)

2.2.1 Reactions of M1–M2 Nucleophiles with Fluoroarenes

2.2.2 Reactions of M1–M2 Nucleophiles with Fluoroalkanes

2.2.3 Reactions of M1–M2 Nucleophiles with Fluoroalkenes

3 Summary and Perspective

Gold(iii)-arene complexes by insertion of olefins into gold-aryl bonds

The synthesis and characterization of the first gold(iii)–arene complexes are described.

The synthesis and characterization of the first gold(iii)–arene complexes are described. Well-defined (P,C)-cyclometalated gold(iii)–aryl complexes were prepared and characterized by NMR spectroscopy. These complexes swiftly and cleanly reacted with norbornene and ethylene to provide cationic gold(iii)–alkyl complexes, in which the remote phenyl ring was η²-coordinated to gold. The interaction between the aromatic ring and the gold(iii) center was thoroughly analyzed by NMR spectroscopy, X-ray diffraction, and DFT calculations. The π–arene coordination was found to significantly influence the stability and reactivity of low coordinated gold(iii) alkyl species.