AQbD TLC-densitometric method approach along with green fingerprint and whiteness assessment for quantifying two combined antihypertensive agents and their impurities

Preserving the environment, reducing the amount of waste resulting from chemical trials, and reducing the amount of energy consumed have currently become a pivotal global trend. An analytical quality by design (AQbD) based eco-friendly TLC-densitometric method was implemented for quantifying two antihypertensive agents, captopril (CPL) and hydrochlorothiazide (HCZ), along with their impurities; captopril disulphide (CDS), chlorothiazide (CTZ) and salamide (SMD). The analytical target profile (ATP) was first identified, followed by selecting the critical analytical attributes (CAAs), such as retardation factors and resolution between the separated peaks. Critical method parameters (CMPs) that may have a crucial influence on CAAs were identified and emanated through the quality risk assessment phase. A literature survey-based preliminary studies were performed, followed by optimization of the selected CMPs through a custom experimental design to attain the highest resolution with optimum retardation factors. Moreover, method robustness was also tested by testing the design space. Complete separation of the drugs and their impurities was achieved using ethyl acetate: glacial acetic acid (6: 0.6, v/v) as a developing system applied to a 12 cm length TLC plate at room temperature with UV scanning at 215 nm. Calibration graphs were found to be linear in the ranges of (0.70-6.00), (0.10-2.00), (0.20-1.00), (0.07-1.50) and (0.05-1.00) µg/band corresponding to CPL, HCZ, CDS, CTZ, and SMD, respectively. Four different green metric tools were used to evaluate the greenness profile of the proposed method, and results showed that it is greener than the reported HPLC method. Method whiteness assessment was also conducted. Moreover, the method performance was evaluated following the ICH guidelines, and the outcomes fell within the acceptable limits. The developed method could be approved for routine assay of the cited components in their pharmaceutical formulations and bulk powder without interference from the reported impurities. The issue of concern is saving money, especially in developing countries.

Ecofriendly single-step HPLC and TLC methods for concurrent analysis of ternary antifungal mixture in their pharmaceutical products

Two accurate, sensitive, and selective methods for simultaneous determination of miconazole nitrate (MIC), nystatin (NYS), and metronidazole (MET) in pure state or drug product were established and verified. First, RP-HPLC-DAD was designed. Separation was accomplished using a ZOBRAX Eclipse Plus RP-C8 column that was running under an isocratic elution of methanol: 0.05% aqueous solution of sodium dodecyl sulphate (40: 60 v/v), with a flow rate that was regulated at 0.8 mL/min. The column temperature was adjusted at 25 °C and diode array detector was monitored at 220 nm. The linearity range of the proposed method was achieved at the concentration of 5-50, 4-50, and 4-40 µg/mL and the attained retention time for the studied drugs was 2.52, 3.52 and 4.99 min for MIC, NYS, and MET, correspondingly. Second, a TLC-densitometric approach was used to resolve the three compounds. Resolution of the three cited drugs was carried out using TLC aluminum plates pre-coated with 0.25 mm silica gel 60 F254. A developing solvent comprised ethyl acetate: toluene: methanol: triethyl amine: formic acid (3: 1: 7: 0.3: 0.1 by volume) (pH = 5.5) was utilized and scanning of the resolved bands at 215 nm. Linearity of the developed TLC method was evaluated and evident to be 0.4-2, 0.4-2.2, and 0.4-2 μg/band for MIC, NYS, and MET, in that order. The suggested chromatographic methods were verified according to ICH directives. The findings of the developed chromatographic procedures were statistically compared with the results of the reported ones using student's t-test and F-test. Furthermore, two green assessment tools evaluated the indicated methods' level of greenness (GAPI and AGREE).

Greenness assessment of UPLC/MS/MS method for determination of two antihypertensive agents and their harmful impurities with ADME/TOX profile study

Hypertension is described by the world health organization (WHO) as a serious medical problem that significantly affects the heart, brain and kidneys. It is a major cause of premature death worldwide. The present study aims to quantify the combination of captopril (CPL), hydrochlorothiazide (HCZ) and their harmful impurities; captopril disulphide (CDS), chlorothiaizde (CTZ) and salamide (SMD). In-silico study was conducted for estimation of pharmacokinetic parameters (ADMET) as well as toxicity profile of the proposed impurities. The results showed that the three impurities under investigation had poor permeability to CNS and cannot pass the blood-brain barrier (BBB), reducing the likelihood of causing side effects in the brain. On the other hand, all studied impurities were found to be hepatotoxic. In consequence, a highly sensitive and green ultra-performance liquid chromatography- tandem mass spectrometric (UPLC/MS/MS) method was developed and validated for separation of the cited drugs in the presence of their harmful impurities; methanol and 0.1% formic acid (90:10, v/v) mixture was used as a mobile phase, eluted at a constant flow rate of 0.7 mL/min at room temperature. Detection was adopted using a tandem mass spectrometer in a positive mode only for CPL and negative mode for HCZ, CDS, CTZ and SMD. Separation was performed within 1 min. Calibration graphs were found to be linear in the ranges of (50.0-500.0 ng mL-1), (20.0-500.0 ng mL-1), (10.0-250.0 ng mL-1), (5.0-250.0 ng mL-1) and (20.0-400.0 ng mL-1) corresponding to CPL, HCZ, CDS, CTZ and SMD, respectively. Additionally, comparative study of greenness profile was established for the proposed and reported methods using five green metric tools. The proposed method was found to be greener than the reported HPLC method. The developed (UPLC/MS/MS) method was validated according to (ICH) guidelines and it was found to has greater sensitivity, shorter analysis time and lower environmental impact compared to the reported methods.