Rainfall-induced removal of copper-based spray residues from vines

The continuous use of copper against fungal diseases and off-target effects causes major environmental and agronomic problems. However, the rain-induced removal of Cu-based residues is known only for a limited number of crops. We present the results of rain-induced removal of fungicides from two monitored vineyard plots which were sprayed with two widely used Cu-based formulations: copper-oxychloride (CO) and Bordeaux mixture (BM), respectively. Cu removal per growing season was 0.60±0.12kgha(-1) (30% of the applied fungicide) for CO and 0.80±0.10kgha(-1) for BM (70% of the applied fungicide). Fractioning the Cu in soluble (CuS) and particulate fractions (CuP) showed that most of the Cu was removed as CuP, but CuS concentrations found in throughfall collectors exceeded the regulatory threshold for toxicity in surface waters. The first few millimeters of rain caused most of the Cu removal. Our findings agreed with the data reported in the scientific literature, in which a significant fraction of the Cu-based formulation is loosely attached to the plant surfaces. In addition, we found that rainfall energy had a minor influence on the removal.

Ultrasound-assisted single extraction tests for rapid assessment of metal extractability from soils by total reflection X-ray fluorescence

In this work, ultrasound-assisted extraction (UAE) was employed for acceleration of metal extraction from soil samples. After extraction, multielemental analysis (Cr, Mn, Fe, Ni, Cu, Zn and Pb) of EDTA and acetic acid extracts was performed by total reflection X-ray fluorescence spectrometry (TXRF). High-intensity ultrasonic processors, i.e. the ultrasonic probe (50W) and the cup-horn sonoreactor (200W) were applied. Both ultrasonic procedures were compared with a miniaturized version of the single extraction scheme proposed by the Standards, Measurements and Testing program (SM&T). The extraction time with EDTA was reduced from 1h (conventional procedure) to 2 min (ultrasonic probe) or to 10 min (cup-horn sonoreactor). The time required for acetic acid extraction was also reduced from 16 h (conventional procedure) to 6 min (ultrasonic probe) or to 30 min (cup-horn sonoreactor). In addition, the amount of sample and extractants was drastically reduced as a result of the miniaturization implemented in the developed approaches. The combination of UAE and TXRF allows assessing the potential metal mobility and bioavailability in a simple way.

Simultaneous ultrasound-assisted emulsification-derivatization as a simple and miniaturized sample preparation method for determination of nitrite in cosmetic samples by microvolume UV-vis spectrophotomety

A simple and miniaturized approach based on ultrasound-assisted emulsification-derivatization is proposed for the determination of nitrite in cosmetic samples by UV-vis micro-spectrophotometry. Oil/water emulsions were formed using 15 mg of cosmetic sample and 1 mL of an aqueous medium containing 0.5% w/v SDS and 1% v/v acetic acid. When powerful sonication systems were used to make emulsions, i.e. probe or cup-horn sonoreactor, stable and transparent emulsions were obtained in one or half minute per sample, respectively. The Griess reaction in these special conditions (i.e. sonication and the presence of an organized medium) was investigated. The absence of matrix effects allows external calibration with aqueous standards for nitrite quantification. Analytical features were compared to those of the European official method 82/434/EEC. Detection limit, sample throughput and reagent consumption were significantly improved.