[Update on collaborative autopsy-based research in German pathology, neuropathology, and forensic medicine]

BACKGROUND

Autopsies are a valuable tool for understanding disease, including COVID-19.

MATERIALS AND METHODS

The German Registry of COVID-19 Autopsies (DeRegCOVID), established in April 2020, serves as the electronic backbone of the National Autopsy Network (NATON), launched in early 2022 following DEFEAT PANDEMIcs.

RESULTS

The NATON consortium's interconnected, collaborative autopsy research is enabled by an unprecedented collaboration of 138 individuals at more than 35 German university and non-university autopsy centers through which pathology, neuropathology, and forensic medicine autopsy data including data on biomaterials are collected in DeRegCOVID and tissue-based research and methods development are conducted. More than 145 publications have now emerged from participating autopsy centers, highlighting various basic science and clinical aspects of COVID-19, such as thromboembolic events, organ tropism, SARS-CoV‑2 detection methods, and infectivity of SARS-CoV-2 at autopsy.

CONCLUSIONS

Participating centers have demonstrated the high value of autopsy and autopsy-derived data and biomaterials to modern medicine. The planned long-term continuation and further development of the registry and network, as well as the open and participatory design, will allow the involvement of all interested partners.

Enterokolitis als Ursache eines akuten unerwarteten Todes eines Orang-Utans in Zoohaltung

Es wird von einem 13 Jahre alt gewordenen weiblichen Orang-Utan berichtet, der 4 Tage vor dem Tod an einer akuten Enterokolitis erkrankte. Die tierärztliche Ultraschalluntersuchung einen Tag vor dem Tod erbrachte den Nachweis von vermehrter Flüssigkeit im Zäkum und einer abschnittsweise verdickten Kolonwand. Nach dem für die Veterinärmediziner und die Zoomitarbeiter unerwarteten Todeseintritt erfolgte eine Obduktion durch Rechtsmediziner der Universitätsmedizin Rostock mit Unterstützung von Ärzten weiterer Fachrichtungen. Dabei wurde als Todesursache eine akute Escherichia-coli-Enterokolitis mit massiver Blutung in den Darm festgestellt. Begünstigend oder ursächlich für die letale Enterokolitis dürften wahrscheinlich zahlreiche rezidivierende Durchfallerkrankungen in der Anamnese des Orang-Utans als Folge eines Verweigerns des Stillens durch die Mutter nach der Geburt gewesen sein.

Deactivation of cardiovascular implantable electronic devices in patients nearing end of life : Reality or only recommendation?

BACKGROUND

Current guidelines recommend considering deactivation of cardiac implantable electronic devices (CIEDs) in patients nearing death. We evaluated the implementation of this recommendation in unselected deceased individuals with CIEDs.

METHODS

Over a 7-month period in 2016, all deceased persons taken to the Rostock crematorium were prospectively screened for CIEDs and these were interrogated in situ. Pacing rate, pacing mode, and lead output were documented as well as patient data including location and time of death. In implantable cardioverter-defibrillators (ICDs), tachycardia therapy adjustment and occurrence of shocks 24 h prior to death were also recorded.

RESULTS

We examined 2297 subjects, of whom 154 (6.7%) had CIEDs. Of these subjects, 125 (100%) pacemakers (PMs) and 27 (96.4%) ICDs were eligible for analysis. Death in persons with ICDs occurred most frequently in hospital (55.6%), while this was less frequently the case for individuals with PMs (43.2%). Furthermore, 33.3% of subjects with ICDs and 18.5% with PMs died in palliative care units (PCU). Shock therapies were switched off in three (60%) individuals with ICDs who died in the PCU, whereas antibradycardia therapy was not withdrawn in any PM patient in the PCU. Therapy withdrawal occurred in two patients with PMs (1.3%) who died in hospital. Patients with PMs had high ventricular pacing rates at the last interrogation (69 ± 36.0%) and often suffered atrioventricular block (39.2%). Six (25%) of the 24 active ICDs presented shocks near the time of death.

CONCLUSION

Many CIED patients died in hospital; nonetheless, in practice, CIED deactivation near death is rarely performed and might be less feasible in subjects with PMs. However, there is still a need to consider deactivation, especially in individuals with ICDs, as one fourth of them received at least one shock within 24 h prior to death.

Individual programming of current multiprogrammable pacemakers : Still unsatisfactory?

BACKGROUND

Pacemaker (PM) technology has developed tremendously in recent decades. We evaluated the extent of individual programming in current PMs.

METHODS

Over a 7-month period in 2016, all deceased persons taken to the Rostock crematorium were prospectively screened for cardiac implantable electronic devices (CIEDs) and these were interrogated in situ. Programming of patient data, leads, and study parameters including mode, lower rate, upper tracking or sensor rate (UTSR), ventricular refractory time, sleeping function, hysteresis, and PM-mediated tachycardia intervention were analyzed and compared with delivery settings. Alterations in atrial/ventricular capture management and atrial/ventricular sensing assurance as well as changes in sensitivity and lead output were evaluated.

RESULTS

We examined 2297 subjects, of whom 154 (6.7%) had CIEDs, with 125 (81.2%) being PMs. Finally, 72 (57.6%) PMs were eligible for analysis with an operation time of 31.0 ± 27.0 months. We excluded 28 (18.2%) implantable cardioverter defibrillators (ICDs), 51 (41%) PMs presenting elective replacement indicator (ERI), two (1.6%) PMs with programming to insufficient function prior to death, and the left ventricle parameter of one (1.4%) cardiac resynchronization therapy pacemaker (CRT-P); further one CIED (0.6%) was not contactable. PMs offered in mean 75.2% of study parameters thereof 88.0% were to adjust manually, whereof 49.3% stayed unchanged to delivery mode. Lead output, UTSR, lower rate, and mode were the most frequently changed parameters (>85.7%, 65.3%, 54.2%, and 52.8%, respectively) compared with unmodified ventricular refractory time and hysteresis (91.7% and. 85.4%, respectively); 2.8% of PMs had out-of-the-box settings. The most frequent personalized data were last (88.9%) and first name (73.6%), while atrial and ventricular serial lead numbers were rarely entered (18.2% and 23.4%, respectively).

CONCLUSION

The programming possibilities of PMs have advanced greatly. Nonetheless, improvements in individual PM programming are still needed as demonstrated by the findings in this study, e.g., PMs with manufacturer settings and lack of individual data.

Effects of transgenic endothelin-2 overexpression on diabetic cardiomyopathy in rats

BACKGROUND

Transgenic overexpression of human endothelin-2 in rats was used to characterize the contribution of endothelin to diabetic cardiomyopathy.

MATERIALS AND METHODS

Diabetes mellitus was induced by streptozotocin in transgenic rats and transgene-negative controls. Nondiabetic animals were included as well to form a 4-group study design. Heart morphological and molecular alterations were analysed following 6 months of hyperglycaemia.

RESULTS

Plasma endothelin concentrations were significantly higher in both transgenic groups than in wild-type groups (nondiabetic: 3.5 +/- 0.4 vs. 2.1 +/- 0.2, P < 0.05; diabetic: 4.5 +/- 0.4 vs. 2.5 +/- 0.4 fmol mL(-1), P < 0.01). Diabetes induced cardiac hypertrophy in both wild-type and transgenic rats and showed the highest myocardial interstitial tissue volume density in diabetic transgenic rats (1.5 +/- 0.07%) as compared with nondiabetic transgenic (1.1 +/- 0.03%), nondiabetic wild-type (0.8 +/- 0.01%) and diabetic wild-type rats (1.1 +/- 0.03%; P < 0.01 for all comparisons). A similar pattern with the most severe changes in the enothelin-2 transgenic, diabetic animals was observed for hypertrophy of the large coronary arteries and the small intramyocardial arterioles respectively. Cardiac mRNA expression of endothelin-1, endothelin receptors type A and B were altered in some degree by diabetes or transgenic overexpression of endothelin-2, but not in a uniform manner. Blood pressure did not differ between any of the four groups.

CONCLUSIONS

Overexpression of the human endothelin-2 gene in rats aggravates diabetic cardiomyopathy by more severe coronary and intramyocardial vessel hypertrophy and myocardial interstitial fibrosis. This transgenic intervention provides further and independent support for a detrimental, blood pressure-independent role of endothelins in diabetic cardiac changes.

Polymerization contraction stress in light-cured compomer restorative materials

OBJECTIVE

The magnitude and kinetics of polymerization contraction stress build-up may be potential predictors of bond failure of adhesive restorations. The present study determined these properties of seven commercial compomers (Dyract, Dyract AP, F2000 Rasant, Hytac, Compoglass F, Luxat, Glasiosite).

METHODS

Polymerization shrinkage was generated by 40 s light curing the test materials (800 mW/cm2). The contraction force induced was recorded for 300 s at room temperature (23-24 degrees C) by means of a Stress-Strain-Analyzer (C factor=0.33). Maximum contraction stress (MPa), coefficient of near linear fit of contraction force/time (gradient) and relative force rate (%/s) of each material were compared with that of two hybrid composites (Tetric Ceram, Prodigy). The statistical analysis was conducted by ANOVA (alpha=0.05) and post hoc Tukey's test.

RESULTS

No statistically significant differences in the maximum stress between Glasiosite (2.27+/-0.06 MPa), Hytac (2.31+/-0.07 MPa) and Tetric Ceram (2.21+/-0.11 MPa), and between Compoglass F (2.60+/-0.18 MPa) and Prodigy (2.70+/-0.06 MPa) were found. The contraction stress of F2000 Rasant (3.41+/-0.09 MPa) and Luxat (3.33+/-0.08 MPa) were significantly highest, whilst Dyract exhibited the significantly lowest shrinkage stress (1.27+/-0.08 MPa) among the tested materials.

SIGNIFICANCE

High contraction stress, early start of stress build-up and rapid contraction force development may lead to failure of bond to tooth structure. This study suggested that the contraction stress and kinetic behavior of compomers are generally similar to those of hybrid composites in a dry condition. Dyract might be superior in maintaining the bond with cavity walls compared to conventional hybrid composites in view of its low shrinkage stress.

Toxicokinetic of HEMA in guinea pigs

OBJECTIVE

Unconverted 2-hydroxyethylmethacrylate (HEMA) can be released from dental resin materials and can enter the body in humans. In the present study the uptake, distribution and excretion of 14C-HEMA applied via different routes were examined in vivo in guinea pigs.

METHODS

HEMA (0.02 mmol/kg bw labelled with a tracer dose 14C-HEMA 0.3 Bq/g bw) was administered by gastric tube or by subcutaneous injection. Urine, feces, and exhaled carbon dioxide were collected for 24 h after administration. Guinea pigs were killed 24 h after the beginning of the experiment and various organs removed and 14C radioactivity measured.

RESULTS

Low fecal 14C levels (about 2% of the dose) and urinary levels of about 15% after 24 h were noted with either route of administration. Direct measurement of exhaled CO(2) showed that about 70% of the dose left the body via the lungs. Two pathways for the metabolism of 14C-HEMA can be described. It is likely that 14C-pyruvate is formed in vivo resulting in the formation of toxic 14C-HEMA intermediates. 14C-HEMA was taken up rapidly from the stomach and small intestine after gastric administration and was widely distributed in the body following administration by each of the routes.

CONCLUSIONS

Clearance from most tissues following gastric and intradermal administration was essentially complete within one day. The peak HEMA levels in all tissues examined after 24 h were at least onemillion-fold less than known toxic levels.

Biological clearance of HEMA in guinea pigs

No toxicokinetic data are available about the dental composite component 2-hydroxyethylmethacrylate (HEMA) in vivo in the literature. Therefore, the excretion of HEMA in feces and urine in vivo and, using the pendular perfusion technique with segments of jejunum and colon, in the biliary and enteric excretion in situ were investigated in anesthetized guinea pigs. In the in situ experiments, guinea pigs (n = 4) received HEMA (0.02 mmol/kgbw labelled with a tracer dose 14C-HEMA 0.3 kBq/gbw) injected into the jugular vein. In the in vivo experiments, guinea pigs (n = 4) received HEMA (+ 14C-HEMA, same dose as above) via gastric tube. Urine and feces were collected for 24h. In the in situ experiments, organs from guinea pigs were removed 60 min after the beginning of the experiment, and then the 14C-radioactivity was measured. During the 60 min perfusion period the calculated amount of 14C-activity excreted into the total jejunum and colon was 6.0 +/- 1.0% and 2.7 +/- 0.7% of the dose administered, respectively (mean +/- sem). Of the 14C-HEMA dose, 5.3 +/- 0.3% was found in the bile. Significantly (p < 0.05) higher bile/blood concentration ratios were found at 10-40 min after the injection of HEMA, as compared to the ratio at 60 min. The total 14C-recovery in all organs tested was 20.0 +/- 2.6%. During 24h the amounts of 14C-activity excreted in the feces and urine were 1.1 +/- 0.1% or 17.1 +/- 1.50% of the dose administered, respectively (mean +/- sem). The total 14C-recovery in all organs tested was 11.6 +/- 0.6%. In a second series of in vivo experiments, exhaled air from the animals was captured during the 24h experimental period. 14C was exhaled to 63.6 +/- 2.11% of the administered 14C-HEMA dose (mean +/- sem; n = 4) as 14C-carbondioxide. The results indicate a rapid clearance of 14C-HEMA and/or 14C-HEMA metabolite(s) from the organism, exhalation being the major route of elimination.

Marginal quality of tooth-colored restorations in class II cavities after artificial aging

This in vitro study compared the proximal marginal adaptation of direct composite restorations with composite and ceramic inlays inserted with different resin cements. Standardized MOD Class II inlay cavities with one proximal box extending below and the other above the CEJ were cut in 48 extracted human molars and randomly assigned to six groups (n=8). Incrementally layered direct composite restorations (P60), composite inlays (P60) and ceramic inlays (Empress; Cerec Vitablocs Mark II) were placed in the cavities. Three different resin cements (RelyX ARC; Variolink II high viscosity; Panavia 21) were used for luting the composite inlays. All ceramic inlays were cemented with RelyX ARC. After finishing and polishing, the teeth were stored for 24 hours in Ringer solution at 37 degrees C before they were subjected to thermal and mechanical loading (5/55 degrees C, 2000x; 50 N vertical load, 50000x). Margins were evaluated on epoxy replicas using a scanning electron microscope at X200 magnification. Statistical analysis was performed with non-parametric test methods (alpha=0.05). The adhesive interfaces to enamel exhibited high percentages of perfect margins for all groups (91.8% to 96%) and a maximum of 5.2% marginal gap formation. Dentin-limited cavity segments demonstrated more marginal openings and less perfect margins than enamel-bound areas; however, this was only statistically significant for direct composite restorations and composite inlays inserted with Variolink II and Panavia 21. RelyXARC showed a significantly better adaptation to P60 inlays compared with the leucite-reinforced Empress ceramic but not the Vitablocs Mark II ceramic.

Longevity of restorations in posterior teeth and reasons for failure

PURPOSE

This article compiles a survey on the longevity of restorations in stress-bearing posterior cavities and assesses possible reasons for failure.

MATERIALS AND METHODS

The dental literature predominantly of the last decade was reviewed for longitudinal, controlled clinical studies and retrospective cross-sectional studies of posterior restorations. Only studies investigating the clinical performance of restorations in permanent teeth were included. Longevity and annual failure rates of amalgam, direct composite restorations, glass ionomers and derivative products, composite and ceramic inlays, and cast gold restorations were determined for Class I and II cavities.

RESULTS

Annual failure rates in posterior stress-bearing restorations are: 0% to 7% for amalgam restorations, 0% to 9% for direct composites, 1.4% to 14.4% for glass ionomers and derivatives, 0% to 11.8% for composite inlays, 0% to 7.5% for ceramic restorations, 0% to 4.4% for CAD/CAM ceramic restorations, and 0% to 5.9% for cast gold inlays and onlays.

CONCLUSION

Longevity of dental restorations is dependent upon many different factors that are related to materials, the patient, and the dentist. The principal reasons for failure were secondary caries, fracture, marginal deficiencies, wear, and postoperative sensitivity. A distinction must be made between factors causing early failures and those that are responsible for restoration loss after several years of service.

Polymerization contraction stress in light-cured packable composite resins

OBJECTIVE

Determination of the polymerization contraction stress of packable composites (ALERT, Surefil, Solitaire, Solitaire 2) and a packable ORMOCER material (Definite) in comparison with a conventional hybrid composite (Tetric Ceram).

METHODS

Contraction force generated by the test materials (10 replications each) was measured by polymerizing the composites filled in a plastic tray between two aluminum attachments mounted in a Stress-Strain-Analyzer testing machine (specimen size: 4x4x2 mm, C-factor=0.33). Contraction force was recorded for 300s under a standard exposure condition (40s, 800mW/cm(2)). Maximum contraction stress (MPa), force rate (N/s), relative force rate (%/s) of each material were statistically analyzed by ANOVA (alpha=0.05) and post-hoc Tukey's test.

RESULTS

Maximum contraction stresses of the packable materials were 4.60 +/- 0.32MPa (ALERT), 4.16 +/- 0.18MPa (Definite), 3.36 +/- 0.08MPa (Solitaire 2), 3.33 +/- 0.23MPa (Solitaire) and 3.13 +/- 0.18MPa (Surefil), which were significantly higher than that of Tetric Ceram (2.51 +/- 0.14MPa). Tetric Ceram exhibited the significantly lowest force rate. Force/time curves were S-shaped. Solitaire especially showed a longer pre-gelation phase before contraction force was recorded.

SIGNIFICANCE

High contraction stress and rapid contraction force development can lead to failure of bond to tooth structure. This study suggested that, packable composite resins are less capable of reducing the contraction stress during the early setting stage, thus not superior in maintaining the bond with cavity walls to conventional hybrid composite Tetric Ceram.

The suitability of packable resin-based composites for posterior restorations

BACKGROUND

Packable composites, promoted for the restoration of stress-bearing posterior teeth, have captured clinicians' interest.

METHODS

The authors tested three packable composites (Alert, Jeneric/Pentron; Solitaire, Heraeus Kulzer, Wehrheim, Germany; SureFil, Dentsply De Trey, Konstanz, Germany); a new packable organically modified ceramic, or ormocer (Definite, Degussa AG, Hanau, Germany); a hybrid composite (Tetric Ceram, Ivoclar Vivadent, Schaan, Liechtenstein) and an ion-releasing composite (Ariston pHc, Ivoclar Vivadent, Schaan, Liechtenstein). They determined modulus of elasticity according to EN 24049:1993 of the European Committee for Standardization. They measured Vickers hardness using a 200-gram load for 40 seconds. To determine the materials' depth of cure, they used both a scraping method (International Standards Organization standard CD 4049:1997) and a hardness profiling method.

RESULTS

The authors calculated means and standard deviations from 10 replications of each test and used one-way analysis of variance and post hoc Tukey tests (alpha = .05). The materials had significant differences (P < .001) in all characteristics. Solitaire had the significantly lowest elastic modulus and microhardness; Alert had the highest values for these characteristics. Ariston pHc exhibited the significantly lowest depth of cure. There was a significant correlation between the two methods of measuring depth of cure (r2 = 0.9945; P = .021).

CONCLUSIONS

The material group of packable composites is rather inhomogeneous in terms of mechanical and physical data. Our data suggest that bulk curing of packable composites in deep cavities still is not recommendable.

CLINICAL IMPLICATIONS

The clinician needs to select packable composites carefully, as it seems that not all of these materials quality for stress-loaded posterior restorations.

Three-year clinical evaluation of composite and ceramic inlays

PURPOSE

To evaluate the 3-yr clinical performance of composite and ceramic inlays in posterior teeth.

MATERIALS AND METHODS

47 composite inlays (Tetric, Blend-a-Lux, Pertac) and 24 ceramic inlays (Empress) were placed by seven student operators under supervision of an experienced dentist. Clinical assessment of 58 inlays (81.7%) was performed after 3 yrs using amodified USPHS criteria and statistically analyzed with Mann-Whitney U test and Fisher's exact test.

RESULTS

A total of 100% of the ceramic inlays and 89% of the composite inlays were assessed to be clinically excellent or acceptable. Three composite inlays failed during the first yr and one had to be replaced during the second evaluation period. All composite inlay failures were recorded on molars, revealing a significantly higher failure rate compared with premolars (Fisher's test, P = 0.041). Ceramic inlays revealed a significantly better "anatomic form of the surface" (P = 0.027) and "integrity of the restoration" (P = 0.035). Inlays in small cavities performed better for "marginal integrity" (P = 0.033) and "discoloration at the margin" (P = 0.038).

Marginal quality and microleakage of adhesive class V restorations

OBJECTIVES

The aim of this in vitro study was to determine the marginal quality and microleakage of composite resin class V restorations.

METHODS

Standardized mixed class V cavities (diameter: 4mm, depth: 2mm) with half of the finish lines limited within dentin were cut in 90 freshly extracted human molars and randomly assigned to nine groups (n=10). After etching enamel and dentin, the cavities were restored with nine different restorative systems (Syntac Sprint/Tetric Ceram=SS, Syntac Single-Component/Tetric Ceram=SC, Onestep/Aeliteflo=OS, Aquaprep+Onestep/Aeliteflo=OA, Prime & Bond 2.1/TPH=PB, Optibond Solo/Prodigy=OP, Singlebond/Z100=SB, Tenure Quik/Marathon=TQ, Solobond M/Arabesk=SM) using a wet-bonding procedure. After finishing and polishing, the teeth were stored for 24h in distilled water at 37 degrees C before they were subjected to thermocycling (5/55 degrees C, 1000x). Epoxy replicas were made for margin analysis in the SEM. Specimens were stained in methylene blue, sectioned, and evaluated for microleakage. Dye penetration was scored on a 0-3 ordinal scale.

RESULTS

Statistical analysis (Kruskal-Wallis H-test, Mann-Whitney U-test) revealed significant differences (P<0.05) among the groups at dentin and enamel margins for the microleakage scores as well as for the results of the quantitative SEM margin analysis. SC revealed a significantly higher percentage of perfect margins in the SEM than OS and SM in enamel and dentin, respectively. OA exhibited significantly more leakage in enamel than all other groups.

CONCLUSIONS

None of the tested restorative systems achieved a perfect seal in dentin and enamel of mixed class V cavities. Marginal quality and sealing ability of adhesive systems to dentin, using a wet-bonding procedure, is still inferior compared with enamel margins.

A 2-year clinical study of composite and ceramic inlays

Objective long-term clinical data are necessary to evaluate the performance of dental restorations. This prospective clinical trial evaluated composite and ceramic inlays for clinical acceptability as restorative materials in posterior teeth and provided 2-year results. The study involved 7 student operators placing 47 composite inlays (Tetric, blend-a-lux, Pertac) and 24 ceramic inlays (Empress) under the supervision of an experienced dentist. Clinical assessment of 56 inlays (78.9%) was performed after 2 years with modified USPHS criteria and statistically analyzed using the Mann-Whitney U test and Fisher's exact test. All the ceramic inlays and 90% of the composite inlays were considered clinically excellent or acceptable. During the first year 3 composite inlays failed and during the second evaluation period 1 had to be replaced. Ceramic inlays produced significantly better "anatomic form of the surface" (P = 0.038) and "integrity of the restoration" values (P = 0.043). Inlays in small cavities exhibited superior "marginal integrity" (P = 0.026) and "marginal discoloration" values (P = 0.034). Fisher's test revealed a significantly higher failure rate in molars than in bicuspids (P = 0.034). Posterior tooth-colored inlays exhibited a success rate of 100% for ceramic inlays and 90% for composite inlays even if placed by relatively inexperienced but supervised student operators.

Clinical results and new developments of direct posterior restorations

PURPOSE

To (1) review the literature and analyze the longevity and reasons for failure of direct resin-based composite (RBC), amalgam, and glass-ionomer cement (GIC) restorations in stress-bearing posterior cavities and (2) to assess new material developments and treatment techniques to restore these cavities.

MATERIALS AND METHODS

This work reviewed the dental literature predominately of the last decade for longitudinal, controlled clinical studies and retrospective cross-sectional studies. Only studies investigating the clinical performance of restorations in permanent teeth were included. Annual failure rates of direct resin-based composite, amalgam, and GIC restorations were determined and failure reasons were discussed.

RESULTS

Annual failure rates in posterior stress-bearing cavities were determined to be: 0-9% for direct RBC restorations, 0-7% for amalgam restorations, and 1.9-14.4% for GIC restorations. The median annual failure rate of longitudinal studies for amalgam was calculated with 1.1%, for RBCs 2.1% and for GICs 7.7%. GIC is significantly worse compared with amalgam and RBC. Main reasons for failure were secondary caries, marginal deficiencies, fracture, and wear. Longitudinal studies showed a strong trend towards a higher longevity compared with cross-sectional investigations.

Mechanical properties of new composite restorative materials

OBJECTIVE

Determination of flexural strength, flexural modulus, fracture toughness, Vickers hardness, and wear resistance of condensable composites (Solitaire, Surefil, Alert) and an ormocer (Definite) in comparison with a hybrid composite (Tetric Ceram) and an ion-releasing composite (Ariston pHc).

METHODS

Flexural strength, flexural modulus, and fracture toughness were determined in 3-point bending. Single-edge notched-bend specimens were used to evaluate fracture toughness. Microhardness was measured with a Vickers indenter. Wear was determined in a pin-on-block-design with a Degusit antagonist at 50 N load and quantified by a replica technique after 6000, 10000, 30000, and 50000 load cycles using a 3D-laser scanner. All results were statistically analyzed with ANOVA and post hoc Tukey HSD tests.

RESULTS

Alert exhibited the highest flexural modulus, K(IC), and hardness, but lowest wear resistance. Solitaire presented the highest wear resistance, but significantly lower flexural strength, flexural modulus, K(IC), and hardness than all other materials. No significant correlation could be detected between hardness and wear of the tested composites with Pearson's correlation coefficient.

SIGNIFICANCE

The condensable composites differed significantly in their mechanical properties. This study suggested that, besides the filler content level and filler size, other factors like matrix-filler interactions highly influence the fracture and wear behavior of the materials.

Three-year clinical evaluation of direct and indirect composite restorations in posterior teeth

STATEMENT OF THE PROBLEM

Objective long-term clinical data are necessary to assess the performance of modern posterior composites as direct and indirect restorations.

PURPOSE

This prospective, long-term clinical trial evaluated direct and indirect composite restorations for clinical acceptability as posterior restoratives in single or multisurface cavities and provided a survey on the 3-year results.

MATERIAL AND METHODS

Under the supervision of an experienced dentist, 9 dental students placed 88 composite restorations (Tetric, blend-a-lux, Pertac-Hybrid Unifil), 43 direct composite restorations, and 45 indirect inlays. Clinical evaluation was performed at baseline and in yearly intervals after placement by 2 other experienced dentists, using modified USPHS criteria. A third follow-up of 60 restorations took place within 33 to 36 months after placement.

RESULTS

A total of 93% of indirect and 87% of direct restorations were assessed to be clinically excellent or acceptable. During the third year, 1 direct restoration in a molar failed because of margin opening. Indirect inlays exhibited a significantly better anatomic form of the surface than direct composite restorations. Premolars revealed a significantly better marginal integrity and anatomic form of the surface than molars. Restorations in molars exhibited a significantly higher failure rate compared with premolars.

CONCLUSION

Posterior composite restorations provided a satisfactory clinical performance over a 3-year period, even if placed by relatively inexperienced but supervised students.

Esthetic compomer restorations in posterior teeth using a new all-in-one adhesive: case presentation

Compomers have continually gained in importance since their introduction in 1993, especially because of their ease of handling. The main indications are cervical lesions, Class III restorations, and restorations in the primary dentition. To extend the indications of compomers to esthetic Class I and II restorations in the permanent dentition, improvements in wear resistance and bond strength need to be accomplished. Studies have shown an improved bond strength and less marginal gap formation between compomers and enamel and dentin with acid etching of the tooth before application of conventional mild self-etching adhesives. Newly formulated, improved self-etching adhesives with a higher demineralization potential recently have been developed. The objective of this case presentation is to demonstrate step-by-step the clinical procedure for the application of a newly developed self-etching adhesive with high demineralization potential in combination with a compomer material in occlusal cavities.

CLINICAL SIGNIFICANCE

Improved self-etching adhesives provide a faster and simplified application technique and allow effective conditioning and priming of enamel and dentin in one step, without waiving sufficient bond strengths. With limited indications, compomers are used in combination with these self-etching primers to restore occlusal cavities in posterior teeth. Evidence-based dentistry requires exact scientific data to evaluate whether this new trend results in benefits for patients. However, until clear evidence from controlled clinical studies supports the use of improved compomer systems in Class I and II cavities in the permanent dentition, dentists should be careful with this indication.

Mechanical properties and wear behavior of light-cured packable composite resins

OBJECTIVES

Determination of flexural strength, flexural modulus, fracture toughness and wear resistance of three packable composites (Solitaire, Surefil, ALERT) and a packable ormocer (Definite) in comparison with an advanced hybrid composite (Tetric Ceram) and an ion-releasing composite (Ariston pHc).

METHODS

Flexural strength, flexural modulus and fracture toughness of each material were determined in three-point bending (each test n = 10). Single-edge notched-bend specimens were used to evaluate the fracture toughness (K1C). Wear of the materials (n = 8) was determined in a pin-on-block-design with a spherical Degusit antagonist at 50 N vertical load and quantified by a replica technique using a 3D-laser scanner. Replicas were made after 6000, 10,000, 30,000 and 50,000 load cycles. The mean wear rate (MWR (micron 3 cycle-1)) was obtained by a linear regression analysis in the steady-state of the time-wear-curve. All results were statistically analyzed with ANOVA and post hoc Tukey HSD tests (p < 0.05).

RESULTS

ALERT exhibited the highest flexural modulus (12.5 +/- 2.1 GPa) and K1C (2.3 +/- 0.2 MN m-3/2), but the lowest wear resistance (8275 micron 3 cycle-1). Solitaire presented the highest wear resistance (1591 micron 3 cycle-1), but significantly lower flexural strength (81.6 +/- 10.0 MPa), flexural modulus (4.4 +/- 0.3 GPa), and K1C (1.4 +/- 0.2 MN m-3/2) than all other materials. Surefil revealed a significantly higher flexural modulus (9.3 +/- 0.9 GPa) and wear resistance (3028 micron 3 cycle-1) than Tetric Ceram (6.8 +/- 0.5 GPa; 5417 micron 3 cycle-1) and Ariston pHc (7.3 +/- 0.8 GPa; 7194 micron 3 cycle-1).

SIGNIFICANCE

The tested packable composite resins differed significantly in their mechanical properties. This study suggested that fracture and wear behavior of the composite resins are highly influenced by the filler system. Overall, Surefil demonstrated good fracture mechanics parameters and a low wear rate.

Bond strength of a compomer to dentin under various surface conditions

This study determined the influence of different dentin pretreatments on the shear bond strength of an adhesive system and corresponding compomer material. One hundred and twenty freshly extracted human molars were ground with wet SiC paper to expose flat oral/buccal surfaces of superficial dentin. The teeth were assigned to 12 treatment groups (n = 10) based on dentin surface finish (600-grit SiC vs. air abrasion vs. 40 microns diamond bur), surface conditioning (acid etching vs. no etching), and moisture content of the dentin (moist vs. dry). Cylinders of Compoglass F compomer were bonded to the dentin with Syntac Single-Component. After 24-h storage in distilled water, the specimens were debonded in shear mode. Bond strengths in MPa (SD) were calculated and bonding sites were analyzed for the mode of failure. Three-way ANOVA revealed significantly higher bond strength values for acid etched specimens (P = 0.001). Moisture content of the dentin surface (P = 0.614) and mechanical surface finish (P = 0.367) had no significant influence on the results. Debonding in unetched groups ranged from 94 to 100% adhesively. Acid etched groups showed adhesive failures ranging from 56 to 100%. To obtain a more reliable bond it is recommended that dentin is acid etched prior to the bonding of a compomer.

Two-year clinical evaluation of direct and indirect composite restorations in posterior teeth

STATEMENT OF PROBLEM

Few long-term clinical studies have reported data of modern posterior composites as direct and indirect restorations.

PURPOSE

This prospective, long-term clinical trial (1) evaluated direct and indirect composite restorations for clinical acceptability as posterior restoratives in single or multisurface carious teeth and (2) provided a survey on the 2-year results.

MATERIAL AND METHODS

Nine dental students placed 88 composite restorations (Tetric, blend-a-lux, Pertac-Hybrid Unifil), 43 direct composite restorations and 45 indirect inlays, under the supervision of an experienced dentist. The first clinical evaluation was performed 11 to 13 months after placement by 2 other experienced dentists, using modified USPHS criteria. A second follow-up of 60 restorations took place within 20 to 26 months after placement.

RESULTS

A total of 93% of indirect and 90% of direct composite restorations were assessed to be clinically excellent or acceptable. Two restorations (1 indirect composite inlay and 1 margin of a direct composite restoration) failed during the second year because of fracture. Indirect inlays demonstrated a significantly better "anatomic form of the surface" than direct composite restorations. Premolars revealed a significantly better margin integrity and postoperative symptoms than molars.

CONCLUSION

Posterior composite restorations provided a satisfactory clinical performance over a 2-year period when placed by relatively inexperienced but supervised students.

Bond strength of composite to dentin treated by air abrasion

This study compared the bond strength of composite to dentin produced by an air-abrasive dentin pretreatment and acid etch only. Two hundred sixty extracted human molars were randomly divided into 13 groups (n = 20). An occlusal dentin surface with a defined smear layer was exposed. Dentin was conditioned either with 37% H3PO4 for 20 seconds, or an air-abrasion unit (KCP 1000, ADT) was used with 120 and 160 psi pressure and two different particle sizes, 50 and 27 microns. A combination of both treatments beginning with air abrasion was tested as well as dentin specimens without pretreatment. The dentin adhesive Syntac Single-Component was applied under dry and moist conditions. Composite cylinders with a bond diameter of 2.5 mm were bonded in two increments to the teeth. Specimens were stored for 24 hours at 37 degrees C in distilled water and then thermo-cycled for 1000 cycles (5/55 degrees C). Shear bond strength was tested using a Universal Testing Machine at 0.5 mm/min cross-head speed. Means and standard deviations in MPa were calculated. Analysis of variance and Bonferroni pairwise comparison tests were performed. Lowest bond strengths were obtained in specimens without conditioning the dentin. Air-abraded specimens showed a significantly higher bond strength than the before-mentioned groups. The comparison for acid-etched groups and air-abraded specimens revealed higher values for the abraded groups. Air abrasion with 160 psi pressure produced a significantly higher bond strength than 120 psi. There was no significant difference between the 27 and 50 microns particles. Air abrasion in combination with a self-priming bonding agent produced bond strength on dentin at least comparable to conditioning with 37% H3PO4.

One-year clinical evaluation of composite and ceramic inlays in posterior teeth

STATEMENT OF PROBLEM

There are only a few studies available that deal with the clinical behavior of composite and ceramic inlay systems as potential substitutes for amalgam restorations.

PURPOSE

This prospective clinical trial evaluated composite and ceramic inlay systems for clinical acceptability as restorative materials in single or multisurface cavities of posterior teeth and provided 1-year results.

MATERIAL AND METHODS

Forty-seven composite inlays (Tetric, Blend-a-lux, Pertac) and 24 heat-pressed ceramic inlays (IPS Empress) were placed in 45 patients by 7 student operators under the supervision of an experienced dentist. The first clinical evaluation was performed 11 to 13 months after placement of the restorations and used modified United States Public Health Services criteria.

RESULTS

Satisfactory results over this period were found, as 100% of ceramic inlays and 94% of composite inlays were assessed to be clinically excellent and acceptable. Only 3 composite inlay restorations were scored delta (unacceptable). Two inlays exhibited secondary caries and 1 demonstrated loss of pulp vitality. For the criteria "anatomic form of the surface" and "marginal integrity," ceramic inlays were significantly better than composite inlays.

CONCLUSION

Posterior tooth-colored inlays provided acceptable and excellent clinical service, even if they are placed by relatively inexperienced student operators.

One-year clinical evaluation of composite fillings and inlays in posterior teeth

In the course of a prospectively designed long-term clinical trial, composite fillings and inlays were evaluated for clinical acceptability as restorative materials in one, two or more surface cavities of posterior teeth over a 1-year period. In 45 patients, 88 restorations were placed by nine student operators, under the supervision of an experienced dentist, to compare the two half sides using the composite resins Tetric (Vivadent), blend-a-lux (Blend-a-med), and Pertac-Hybrid Unifil (Espe). The first clinical follow-up check took place within a time period of 11-13 months after placement of the restorations using modified USPHS criteria. The interpretation of the clinical criteria showed satisfactory results over this time period: more than 85% of the inlays and direct fillings were rated "alpha" or "bravo", using the parameters of assessment defined in this study. Only three restorations (two fillings, one inlay), all in molars, were rated "delta", i.e., unacceptable. The reasons for their replacement were marginal opening, secondary caries, and loss of sensitivity. For the criteria "surface texture", "anatomical form of the surface", and "occlusion", composite inlays were significantly better than composite fillings. These results indicate that posterior composite restorations provide acceptable and excellent clinical service, even if they are placed by relatively inexperienced student operators.

Crop/weed gene flow:Chenopodium quinoa Willd. andC. berlandieri Moq

Introduction of the Andean grain chenopod (Chenopodium quinoa) into North America placed this crop within the distributional range of a related wild species,C. berlandieri. This wild species, native to the North American flora, is cross-compatible withC. Quinoa. Isozyme analysis of progeny fromC. berlandieri plants growing within and at the periphery of theC. Quinoa fields, combined with fertility assessment and phenetic comparison among putative hybrids and parental types, indicates that over 30% of progeny from wild plants growing as weeds withC. quinoa in 1987 were crop/weed hybrids. This high incidence of interspecific gene flow from crop to weed appears to be the result of asymmetric pollen flow to free-living plants from high-density cultivated populations. The observed level of crop/weed hybridization, combined with heterosis and partial fertility of F1 crop/weed hybrids, suggests that repeated annual cycles ofC. quinoa cultivation within the North American range ofC. berlandieri could produce introgressive change among sympatric wild populations. In terms of risk assessment for biotechnology, these results suggest that the breeding system may not provide an accurate indication of the potential for genetic interaction among predominately self-pollinating grain crops and their free-living relatives.