Buttermilk as Encapsulating Agent: Effect of Ultra-High-Pressure Homogenization on Chia Oil-in-Water Liquid Emulsion Formulations for Spray Drying

Functional foods are highly demanded by consumers. Omega-3 rich oil and commercial buttermilk (BM), as functional components, used in combination to produce emulsions for further drying may facilitate the incorporation to foods. Ultra-high-pressure homogenization (UHPH) has a great potential for technological and nutritional aspects in emulsions production. The present study aimed to examine the potential improvement of UHPH technology in producing buttermilk-stabilized omega-3 rich emulsions (BME) for further drying, compared with conventional homogenization. Oil-in-water emulsions formulated with 10% chia: sunflower oil (50:50); 30% maltodextrin and 4 to 7% buttermilk were obtained by using conventional homogenization at 30 MPa and UHPH at 100 and 200 MPa. Particle size analysis, rheological evaluation, colloidal stability, zeta-potential measurement, and microstructure observations were performed in the BME. Subsequent spray drying of emulsions were made. As preliminary approximation for evaluating differences in the homogenization technology applied, encapsulation efficiency and morphological characteristics of on spray-dried emulsions (SDE) containing 21.3 to 22.7% oil content (dry basis) were selected. This study addresses the improvement in stability of BME treated by UHPH when compared to conventional homogenization and the beneficial consequences in encapsulation efficiency and morphology of SDE.

Effect of heat and high-pressure treatments on microbiological quality and immunoglobulin G stability of caprine colostrum

Caprine colostrums (6 batches) were subjected to heat (56 degrees C for 60 min and 63 degrees C for 30 min) and high-pressure (400 and 500 MPa for 10 min at 20 degrees C) treatments at laboratory scale, and analyses of the main microbial groups and the extent of IgG denaturation (determined by immunodiffusion) were performed. Overall mean microbial values in raw colostrums were: total count, 5.55 log cfu/mL; Enterobacteriaceae, 2.64 log cfu/mL; lactococci, 5.41 log cfu/mL; lactobacilli, 2.34 log cfu/mL; and enterococci, 4.06 log cfu/mL. Neither Salmonella spp. nor Listeria monocytogenes were detected, whereas coagulase-positive staphylococci were found in various colostrum samples with an overall mean of 1.02 log cfu/mL. Heat and high-pressure treatments significantly reduced total count (1.47 log), lactococci (1.45 log), enterococci (2.47 log), and Enterobacteriaceae, whereas lactobacilli and coagulase-positive staphylococci counts were reduced to undetectable levels, but differences between technological treatments were not statistically significant. High-pressure treatments were as efficient in reducing the bacterial population as were heat pasteurization treatments: 95.50 and 96.93% for pressure treatments of 400 and 500 MPa, and 91.61 and 97.59% for heat treatments of 56 degrees C for 60 min and 63 degrees C for 30 min, respectively. All treatments assayed produced a reduction in colostrum IgG concentration (27.53, 23.58, 23.33, 22.09, and 17.06 mg/mL for raw, heat-treated at 56 degrees C for 60 min or 63 degrees C for 30 min, and pressure-treated at 400 and 500 MPa, respectively), but differences were only observed between raw colostrums and those pressure-treated at 500 MPa. This laboratory-scale study indicated that 20- to 30-mL volumes of goat colostrum could be heated and pressure-treated (400 MPa) to produce hygienic colostrum without affecting IgG concentration.

Effects of Ultra-High Pressure Homogenization on Microbial and Physicochemical Shelf Life of Milk

The effect of ultra-high pressure homogenization (UHPH) on microbial and physicochemical shelf life of milk during storage at 4 degrees C was studied and compared with a conventional heat preservation technology used in industry. Milk was standardized at 3.5% fat and was processed using a Stansted high-pressure homogenizer. High-pressure treatments applied were 100, 200, and 300 MPa (single stage) with a milk inlet temperature of 40 degrees C, and 200 and 300 MPa (single stage) with a milk inlet temperature of 30 degrees C. The UHPH-treated milks were compared with high-pasteurized milk (PA; 90 degrees C for 15 s). The microbiological quality was studied by enumerating total counts, psychrotropic bacteria, lactococci, lactobacilli, enterococci, coliforms, spores, and Pseudomonas. Physicochemical parameters assessed in milks were viscosity, color, pH, acidity, rate of creaming, particle size, and residual peroxidase and phosphatase activities. Immediately after treatment, UHPH was as efficient (99.99%) in reducing psychrotrophic, lactococci, and total bacteria as was the PA treatment, reaching reductions of 3.5 log cfu/mL. Coliforms, lactobacilli, and enterococci were eliminated. Microbial results of treated milks during storage at 4 degrees C showed that UHPH treatment produced milk with a microbial shelf life between 14 and 18 d, similar to that achieved for PA milk. The UHPH treatments reduced the L* value of treated milks and induced a reduction in viscosity values of milks treated at 200 MPa compared with PA milks; however, these differences would not be appreciated by consumers. In spite of the fat aggregates detected in milks treated at 300 MPa, no creaming was observed in any UHPH-treated milk. Hence, alternative methods such as UHPH may give new opportunities to develop fluid milk with an equivalent shelf life to that of PA milk in terms of microbial and physicochemical characteristics.