Sugarcane Light-Colored Lignin: A Renewable Resource for Sustainable Beauty

Lignin has emerged as a promising eco-friendly multifunctional ingredient for cosmetic applications, due to its ability to protect against ultraviolet radiation and its antioxidant and antimicrobial properties. However, its typical dark color and low water solubility limit its application in cosmetics. This study presents a simple process for obtaining light-colored lignin (LCLig) from sugarcane bagasse (SCB) alkaline black liquor, involving an oxidation treatment with hydrogen peroxide, followed by precipitation with sulfuric acid. The physico-chemical characterization, antioxidant and emulsifying potential of LCLig, and determination of its safety and stability in an oil-in-water emulsion were performed. A high-purity lignin (81.6%) with improved water solubility was obtained, as a result of the balance between the total aromatic phenolic units and the carboxylic acids. In addition, the antioxidant and emulsifying capacities of the obtained LCLig were demonstrated. The color reduction treatment did not compromise the safety of lignin for topical cosmetic applications. The emulsion was stable in terms of organoleptic properties (color, pH, and viscosity) and antioxidant activity over 3 months at 4, 25, and 40 °C.

From sugarcane to skin: Lignin as a multifunctional ingredient for cosmetic application

Lignin has been suggested as a promising candidate for cosmetic applications due to its remarkable potential to absorb ultraviolet rays and distinctive antioxidant activity. This study aims at evaluating the performance of lignin from sugarcane bagasse (SCB) as natural UV blocker, antioxidant, and pigment. Lignin was extracted from SCB, characterized and incorporated into a blemish balm (BB) cream. The biological potential, concretely, in vitro and in vivo sun protection factor (SPF) and in vitro UVA-PF, and safety were assessed. A high-purity SCB lignin (>92 %) was obtained by a mild alkaline extraction process. The results of cytotoxicity, mutagenicity, skin sensitization and in vivo acute cutaneous irritation demonstrated that SCB lignin is safe for topical applications. Lignin showed capacity to scavenge both ABTS and DPPH radicals, which were preserved after its incorporation into the cosmetic formulation. Notable results were achieved in terms of in vitro and in vivo SPF of 9.5 ± 2.9 and 9.6 ± 0.8, respectively. Furthermore, the tested lignin-based BB cream revealed a broad-spectrum UV protection (critical wavelength of 378 ± 0.5 nm). These results suggest SCB lignin as multifunctional and safe ingredient for use in cosmetic products.

Lignin from sugarcane bagasse as a prebiotic additive for poultry feed

Diet is a crucial factor on health and well-being of livestock animals. Nutritional strengthening with diet formulations is essential to the livestock industry and animal perfor-mance. Searching for valuable feed additives among by-products may promote not only circular economy, but also functional diets. Lignin from sugarcane bagasse was proposed as a potential prebiotic additive for chickens and incorporated at 1 % (w/w) in commercial chicken feed, tested in two feed forms, namely, mash and pellets. Physico-chemical characterization of both feed types with and without lignin was performed. Also, the prebiotic potential for feeds with lignin was assessed by in vitro gastrointestinal model and evaluated the impact on chicken cecal Lactobacillus and Bifidobacterium. As for the pellet's physical quality, there was a higher cohesion of the pellets with lignin, indicating a higher resistance to breakout and lignin decreases the tendency of the pellets for microbial contamination. Regarding the prebiotic potential, mash feed with lignin showed higher promotion of Bifidobacterium in comparison with mash feed without lignin and to pellet feed with lignin. Lignin from sugarcane bagasse has prebiotic potential as additive to chicken feed when supplemented in mash feed diets, presenting itself as a sustainable and eco-friendly alternative to chicken feed additives supplementation.

The biomimetic surface topography ofRubus fruticosusleaves stimulate the induction of osteogenic differentiation of rBMSCs

The interaction between cells and biomaterials is essential for the success of biomedical applications in which the implantation of biomaterials in the human body is necessary. It has been demonstrated that material´s chemical, mechanical, and structural properties can influence cell behavior. The surface topography of biomaterials is a physical property that can have a major role in mediating cell-material interactions. This interaction can lead to different cell responses regarding cell motility, proliferation, migration, and even differentiation. The combination of biomaterials with mesenchymal stem cells (MSCs) for bone regeneration is a promising strategy to avoid the need for autologous transplant of bone. Surface topography was also associated with the capacity to control MSCs differentiation. Most of the topographies studied so far involve machine-generated surface topographies. Herein, our strategy differentiates from the above mentioned since we selected natural surface topographies that can modulate cell functions for regenerative medicine strategies.
Rubus fruticosus leaf was the selected topography to be replicated in PCL membranes through Polydimethylsiloxane (PDMS) moulding and using soft lithography. Afterwards, rat bone marrow stem cells (rBMSC) were seeded at the surface of the imprinted PCL membranes to characterize the bioactive potential of our biomimetic surface topography to drive rBMSCs differentiation into the osteogenic lineage. The selected surface topography in combination with the osteogenic inductive medium reveals having a synergistic effect promoting osteogenic differentiation.

Biomimetic surface topography as a potential modulator of macrophages inflammatory response to biomaterials

The implantation of biomaterial devices can negatively impact the local microenvironment through several processes including the injury incurred during the implantation process and the associated host inflammatory response. Immune cell responses to implantable biomaterial devices mediate host-material interactions. Indeed, the immune system plays a central role in several biological processes required for the integration of biomaterials such as wound healing, tissue integration, inflammation, and foreign body reactions. The implant physicochemical properties such as size, shape, surface area, topography, and chemistry have been shown to provide cues to the immune system. Its induced immune-modulatory responses towards inflammatory or wound healing phenotypes can determine the success of the implant. In this work, we aim to evaluate the impact of some biomimetic surface topographies on macrophages' acute inflammatory response. For that, we selected 4 different biological surfaces to replicate through soft lithography on spin casting PCL membranes. Those topographies were: the surface of E. coli, S.eppidermidis and L929 cells cultured in polystyrene tissue culture disks, and an Eggshell membrane. We selected a model based on THP-1-derived macrophages to study the analysis of the expression of both pro-inflammatory and anti-inflammatory markers. Our results revealed that depending on the surface where these cells are seeded, they present different phenotypes. Macrophages present a M1-like phenotype when they are cultured on top of PCL membranes with the surface topography of E. coli and S. epidermidis. When cultured on membranes with L929 monolayers or Eggshell membrane surface topography, the macrophages present a M2-like phenotype. These results can be a significant advance in the development of new implantable biomaterial devices since they can help to modulate the inflammatory responses to implanted biomaterials by controlling their surface topography.

Non-melanoma skin cancers: physio-pathology and role of lipid delivery systems in new chemotherapeutic treatments

Non-melanoma carcinoma has high incidence rates and has two most common subtypes: basal cell carcinoma and squamous cell carcinoma. This type of carcinoma is usually not fatal; however, it can destroy sensory organs such as the nose, ears, and lips. The treatment of these injuries using non-invasive methods is thus strongly recommended. Some treatments for non-melanoma carcinoma are already well defined, such as surgery, cryosurgery, curettage and electrode section, and radiotherapy; however, these conventional treatments cause inflammation and scarring. In the non-surgical treatment of non-melanoma carcinoma, the topical administration of chemotherapeutic drugs contributes for an effective treatment with reduced side effects. However, the penetration of anticancer drugs in the deeper layers of the skin is required. Lipid delivery systems (liposomes, solid lipid nanoparticles, nanostructured lipid carriers) have been developed to overcome epidermal barrier of the skin and to allow the drugs to reach tumor cells. These lipid nanoparticles contribute to control the release profile of the loaded chemotherapeutic drugs, maintaining their stability and increasing death of tumor cells. In this review, the characteristics of non-melanoma carcinoma will be discussed, describing the main existing treatments, together with the contribution of lipid delivery systems as an innovative approach to increase the effectiveness of topical therapies for non-melanoma carcinomas.

Biomimetic Surface Topography from the Rubus fruticosus Leaf as a Guidance of Angiogenesis in Tissue Engineering Applications

The promotion of angiogenesis is a fundamental step for efficient organ/tissue reconstitution and replacement. Thus, several strategies to promote vascularization of scaffolds were studied to satisfy this unsolved clinical need. The interface between cells and substrates is a determinant for the success of tissue engineering (TE) strategies. Substrate's topography is reported to play a key role in influencing endothelial cell behavior, namely, on its proliferation, metabolic activity, morphology, migration, and secretion of cytokines and chemokines. Therefore, surface topography of the biomaterial-based grafts is a crucial property that is considered in the development of a new TE approach. Herein, we hypothesize that the surface of Rubus fruticosus leaf plays a crucial role in driving angiogenesis since its architecture resembles the vascular structures at a biologically relevant size scale. For this, we produced biomimetic polycaprolactone (PCL) membranes (BpMs) replicating the surface topography of a R. fruticosus leaf by replica molding and nanoimprint lithography. Our results showed an enhanced performance in terms of proliferation of the human endothelial cell line on top of the BpM. Moreover, an asymmetric cellular spatial distribution among the surface of the BpM was observed. These cells seem to have higher density for longer time periods in the region that replicates the leaf veins. Finally, we assess the angiogenic capacity through a chick chorioallantoic membrane assay, revealing that BpMs are more prone to support angiogenesis than flat PCL membranes. We strongly believe that this strategy can bring new insights into developing TE strategies with an enhanced performance in terms of the vascular integration between the host and the scaffolds implanted.

Fabrication of biomimetic patterned PCL membranes mimicking the complexity of Rubus fruticosus leaves surface

The development of bioresponsive interfaces that can induce a beneficial impact on cell mechanisms, such as adhesion, proliferation, migration and differentiation are of utmost relevance in Tissue engineering (TE) approaches. The surface topography is a captivating property that contribute to interesting cell responses, being inspired by several cues found in nature. Therefore, the study herein presented reports the fabrication of a surface topography using the Rubus fruticosus leaf on spin casting polycaprolactone (PCL) membranes. The topography was replicated by replica molding rapid fabrication technique and nanoimprint lithography (NIL). The biomimetic patterned PCL membranes (bpM) were successfully produced revealing high detail due to the complexity of the leaf's surface ranging from the stroma structures to nerves structures. The thermal evaluation revealed a slight increase of crystallinity of the bpM compared with the other tested conditions. However, did not induce significant effects on the melting and recrystallization temperatures. The mechanical properties revealed that the young modulus increase from 3.2 MPa to 4.4 MPa during the imprinting process. However, bpM presents a lowest elongation capacity than bare membrane (bM) (1076 to 444 %, respectively) due to the heterogeneous thickness induced by the topography. The selected topography revealed to promote a positive bioresponse, depicted by the improvement of the cellular behaviour and different organization. This promising strategy revealed that circumventing the traditional topographies by nature mimetic topographies is fundamental for the development of innovative bioresponsive substrates that can tune cellular behaviour in TE strategies.

Formulating octyl methoxycinnamate in hybrid lipid-silica nanoparticles: An innovative approach for UV skin protection

Sunscreens have been employed on daily skin care for centuries. Their role in protecting the skin from sun damage, avoiding accelerated photoaging and even limiting the risk of development of skin cancer is unquestionable. Although several chemical and physical filters are approved as sunscreens for human use, their safety profile is dependent on their concentration in the formulation which governs their acceptance by the regulatory agencies. A strategic delivery of such molecules should provide a UV protection and limit the skin penetration. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) may offer an alternative approach to achieve a synergistic effect on the UV protection when loaded with sunscreens as particles themselves also have a UV light scattering effect. Besides, the lipid character of SLN and NLC improves the encapsulation of lipophilic compounds, with enhanced loading capacity. Silica nanoparticles have also been employed in sunscreen formulations. Due to the formed sol-gel complexes, which covalently entrap sunscreen molecules, a controlled release is also achieved. In the present work, we have developed a new sunscreen formulation composed of hybrid SLN-Silica particles loaded with octyl methoxycinnamate (Parsol®MCX), and their further incorporation into a hydrogel for skin administration. Hybrid SLN-silica particles of 210.0 ± 3.341 nm of mean size, polydispersity below 0.3, zeta potential of ca. |7| mV, loading capacity of 19.9% and encapsulation efficiency of 98.3% have been produced. Despite the slight negative surface charge, the developed hybrid nanoparticles remained physicochemically stable over the study period. Turbiscan transmission profiles confirmed the colloidal stability of the formulations under stress conditions. The texture profile analysis of Parsol-SLN and Parsol-SLN-Si revealed semi-solid properties (e.g. adhesiveness, hardness, cohesiveness, springiness, gumminess, chewiness, resilience) suitable for topical application, together with the bioadhesiveness in the skin of pig ears. The non-irritation profile of the hybrid nanoparticles before and after dispersion into Carbopol hydrogels was confirmed by HET-CAM test.

Multiple Cell Signalling Pathways of Human Proinsulin C-Peptide in Vasculopathy Protection

A major hallmark of diabetes is a constant high blood glucose level (hyperglycaemia), resulting in endothelial dysfunction. Transient or prolonged hyperglycemia can cause diabetic vasculopathy, a secondary systemic damage. C-Peptide is a product of cleavage of proinsulin by a serine protease that occurs within the pancreatic β-cells, being secreted in similar amounts as insulin. The biological activity of human C-peptide is instrumental in the prevention of diabetic neuropathy, nephropathy and other vascular complications. The main feature of type 1 diabetes mellitus is the lack of insulin and of C-peptide, but the progressive β-cell loss is also observed in later stage of type 2 diabetes mellitus. C-peptide has multifaceted effects in animals and diabetic patients due to the activation of multiple cell signalling pathways, highlighting p38 mitogen-activated protein kinase and extracellular signal-regulated kinase ½, Akt, as well as endothelial nitric oxide production. Recent works highlight the role of C-peptide in the prevention and amelioration of diabetes and also in organ-specific complications. Benefits of C-peptide in microangiopathy and vasculopathy have been shown through conservation of vascular function, and also in the prevention of endothelial cell death, microvascular permeability, neointima formation, and in vascular inflammation. Improvement of microvascular blood flow by replacing a physiological amount of C-peptide, in several tissues of diabetic animals and humans, mainly in nerve tissue, myocardium, skeletal muscle, and kidney has been described. A review of the multiple cell signalling pathways of human proinsulin C-peptide in vasculopathy protection is proposed, where the approaches to move beyond the state of the art in the development of innovative and effective therapeutic options of diabetic neuropathy and nephropathy are discussed.

Comparison of antiproliferative effect of epigallocatechin gallate when loaded into cationic solid lipid nanoparticles against different cell lines

Several therapeutic properties have been attributed to epigallocatechin gallate (EGCG), a phytopharmaceutical polyphenol with antioxidant and antiproliferative activity. EGCG is, however, very prone to oxidation in aqueous solutions which changes its bioactive properties. Its loading in nanoparticles has been proposed to reduce its degradation while increasing its in vivo efficacy. The aim of this study was to compare the antiproliferative effect of EGCG before and after its loading in solid lipid nanoparticles (SLNs), against five different cell lines (Caco-2, HepG2, MCF-7, SV-80 and Y-79). EGCG produced concentration- and time-dependent antiproliferative effect, with efficacy dependent on the cell line. The order of potency was: MCF-7>SV-80>HepG2>Y-79>Caco-2, for 24 h exposure (MCF-7 IC₅₀=58.60 ± 3.29 µg/mL; Caco-2 IC₅₀>500.00 µg/mL). To the best of our knowledge this is the first study reporting EGCG antiproliferative effect in SV-80 and Y-79 cells. DDAB-SLN physicochemical properties (size ∼134 nm; PI∼0.179; ZP ∼+28mV) were only slightly modified with EGCG loading (EGCG-DDAB-SLN: ∼144 nm; PI∼0.160; ZP ∼+26mV). EGCG loading in SLN, only slightly increases the EGCG antiproliferative effect in MCF-7 and SV-80 cells. SLN exhibited intrinsic toxicity, attributed to the surfactant used in its production. From the obtained results, the biocompatibility of blank SLN must be also considered when testing the efficacy of loaded phytopharmaceutics.

The Influence of Polysaccharide Coating on the Physicochemical Parameters and Cytotoxicity of Silica Nanoparticles for Hydrophilic Biomolecules Delivery

The present work reports the effect of polysaccharides (chitosan and sodium alginate) on silica nanoparticles (SiNP) for hydrophilic molecules delivery taking insulin as model drug. The influence of tetraethyl orthosilicate (TEOS) and homogenization speed on SiNP properties was assessed by a 22 factorial design achieving as optimal parameters: 0.43 mol/L of TEOS and homogenization speed of 5000 rpm. SiNP mean particle size (Z-Ave) was of 256.6 nm and polydispersity index (PI) of 0.218. SiNP coated with chitosan (SiNP-CH) or sodium alginate (SiNP-SA) increased insulin association efficacy; reaching 84.6% (SiNP-SA) and 90.8% (SiNP-CH). However, coated SiNP released 50%-60% of the peptide during the first 45 min at acidic environment, while uncoated SiNP only released 30%. Similar results were obtained at pH 6.8. The low Akaike's (AIC) values indicated that drug release followed Peppas model for SiNP-SA and second order for uncoated SiNP and SiNP-CH (pH 2.0). At pH 6.8, the best fitting was Boltzmann for Ins-SiNP. However, SiNP-CH and SiNP-SA showed a first-order behavior. Cytotoxicity of nanoparticles, assessed in Caco-2 and HepG2 cells, showed that 100 to 500 µg/mL SiNP-CH and SiNP-SA slightly decreased cell viability, comparing with SiNP. In conclusion, coating SiNP with selected polysaccharides influenced the nanoparticles physicochemical properties, the insulin release, and the effect of these nanoparticles on cell viability.

Optimization of nimesulide-loaded solid lipid nanoparticles (SLN) by factorial design, release profile and cytotoxicity in human Colon adenocarcinoma cell line

The aim of this work is development of a nontoxic, long-term stable solid lipid nanoparticles (SLN) formulation for the loading of Nimesulide (NiM) by a 2² factorial design. The optimized formulation was composed of 10 wt% of glyceryl behenate and 2.5 wt% of poloxamer 188. Immediately after production, Z-Ave of NiM-SLN was 166.1 ± 0.114 nm, with a polydispersity index (PI) of 0.171 ± 0051 and zeta potential nearly neutral (-3.10 ± 0.166 mV). A slight increase of Z-Ave was recorded for NiM-SLN stored at 25 °C for a period of 15 days, whereas at 4 °C particles kept size within similar range. Long-term stability was monitored using TurbiscanLab^®, showing a high stability of the nanoparticles with variations in the backscattering profiles below 10%. The release profile of NiM-SLN followed a sustained pattern with ca. 30% of drug released up to 24 h. Empty-SLN and NiM-SLN were nontoxic after exposing Caco-2 cells to the highest concentration (100 μg/mL) up to 48 hours (cell viability higher than 80%). NiM-SLN were lyophilized using different cryoprotectants, producing particles of 463.1 ± 36.63 nm (PI 0.491 ± 0.027) with 5% trehalose. Solid character of NiM-SLN was confirmed by DSC, recording a recrystallization index of 83% for NiM-SLN and of 74% for lyophilized SLN.

Ibuprofen nanocrystals developed by 22 factorial design experiment: A new approach for poorly water-soluble drugs

The reduction of the particle size of drugs of pharmaceutical interest down to the nano-sized range has dramatically changed their physicochemical properties. The greatest disadvantage of nanocrystals is their inherent instability, due to the risk of crystal growth. Thus, the selection of an appropriate stabilizer is crucial to obtain long-term physicochemically stable nanocrystals. High pressure homogenization has enormous advantages, including the possibility of scaling up, lack of organic solvents and the production of small particles diameter with low polydispersity index. The sequential use of high shear homogenization followed by high pressure homogenization, can modulate nanoparticles’ size for different administration routes. The present study focuses on the optimization of the production process of two formulations composed of different surfactants produced by High Shear Homogenization followed by hot High Pressure Homogenization. To build up the surface response charts, a 2² full factorial design experiment, based on 2 independent variables, was used to develop optimized formulations. The effects of the production process on the mean particle size and polydispersity index were evaluated. The best ibuprofen nanocrystal formulations were obtained using 0.20% Tween 80 and 1.20% PVP K30 (F1) and 0.20% Tween 80 and 1.20% Span 80 (F2). The estimation of the long-term stability of the aqueous suspensions of ibuprofen nanocrystals was studied using the LUMISizer. The calculated instability index suggests that F1 was more stable when stored at 4 °C and 22 °C, whereas F2 was shown to be more stable when freshly prepared.

Ocular Drug Delivery - New Strategies for Targeting Anterior and Posterior Segments of the Eye

The ocular delivery of drugs encounters several limitations because of the dynamic and static barriers of the human's eye anatomy and physiology. The poor bioavailability of drugs are mainly related to the topical administration, i.e. eye drops which is the most common drug dosage form for the treatment of eye pathologies. Precorneal factors and drug limitations related to its solubility and susceptibility for physicochemical degradation could be the main reasons for the poor permeation and uptake in the ocular mucosa. Pathologies affecting the anterior and posterior segment of the eye are thereafter difficult to be treated and, given the chronic and degenerative nature of some of these injuries, it is crucial to improve drugs therapeutic effect. Nanotechnology-based delivery systems could be a suitable approach to overcome these limitations. Some of the most important colloidal systems are highlighted in this review, such as the use of mucoadhesive polymers, prodrugs, nanogels, liposomes, microemulsions, lipid and polymeric nanoparticles, cyclodextrins, dendrimers and nanocrystals, along with their clinical and therapeutic relevance for the administration of drugs for ocular delivery.

Hydrophilic Polymers for Modified-Release Nanoparticles: A Review of Mathematical Modelling for Pharmacokinetic Analysis

Hydrophilic polymers are the most common group of polymers used in the preparation of modifiedrelease drug delivery systems. This is due to their versatility, low cost, high production yield, as well as easy manufacturing and adequate in vitro/in vivo correlation. In normal physiological conditions, the matrix controls the release of the loaded drug over time through a process of diffusion and/or erosion of the matrix, depending on its physicochemical composition. This is particularly relevant when describing the pharmacokinetic profile of nanosized drug delivery systems (nanoparticles). The use of mathematical models became an important tool to characterize the pharmacokinetics of drugs loaded in nanoparticles to improve the drug bioavailability and to establish bioequivalence. Therefore, the drug release profile can be predicted by a minimum number of experimental studies, since the mathematical equations reveal the dissolution rate of the drug loaded in the hydrophilic matrix. The present paper discusses the use of mathematical models when developing modified-release drug delivery systems of nanometer size composed of hydrophilic polymers.

Biopharmaceutical evaluation of epigallocatechin gallate-loaded cationic lipid nanoparticles (EGCG-LNs): In vivo, in vitro and ex vivo studies

Cationic lipid nanoparticles (LNs) have been tested for sustained release and site-specific targeting of epigallocatechin gallate (EGCG), a potential polyphenol with improved pharmacological profile for the treatment of ocular pathologies, such as age-related macular edema, diabetic retinopathy, and inflammatory disorders. Cationic EGCG-LNs were produced by double-emulsion technique; the in vitro release study was performed in a dialysis bag, followed by the drug assay using a previously validated RP-HPLC method. In vitro HET-CAM study was carried out using chicken embryos to determine the potential risk of irritation of the developed formulations. Ex vivo permeation profile was assessed using rabbit cornea and sclera isolated and mounted in Franz diffusion cells. The results show that the use of cationic LNs provides a prolonged EGCG release, following a Boltzmann sigmoidal profile. In addition, EGCG was successfully quantified in both tested ocular tissues, demonstrating the ability of these formulations to reach both anterior and posterior segment of the eye. The pharmacokinetic study of the corneal permeation showed a first order kinetics for both cationic formulations, while EGCG-cetyltrimethylammonium bromide (CTAB) LNs followed a Boltzmann sigmoidal profile and EGCG-dimethyldioctadecylammonium bromide (DDAB) LNs a first order profile. Our studies also proved the safety and non-irritant nature of the developed LNs. Thus, loading EGCG in cationic LNs is recognised as a promising strategy for the treatment of ocular diseases related to anti-oxidant and anti-inflammatory pathways.

Effect of mucoadhesive polymers on the in vitro performance of insulin-loaded silica nanoparticles: Interactions with mucin and biomembrane models

The present paper focuses on the development and characterization of silica nanoparticles (SiNP) coated with hydrophilic polymers as mucoadhesive carriers for oral administration of insulin. SiNP were prepared by sol-gel technology under mild conditions and coated with different hydrophilic polymers, namely, chitosan, sodium alginate or poly(ethylene glycol) (PEG) with low and high molecular weight (PEG 6000 and PEG 20000) to increase the residence time at intestinal mucosa. The mean size and size distribution, association efficiency, insulin structure and insulin thermal denaturation have been determined. The mean nanoparticle diameter ranged from 289 nm to 625 nm with a PI between 0.251 and 0.580. The insulin association efficiency in SiNP was recorded above 70%. After coating, the association efficiency of insulin increased up to 90%, showing the high affinity of the protein to the hydrophilic polymer chains. Circular dichroism (CD) indicated that no conformation changes of insulin structure occurred after loading the peptide into SiNP. Nano-differential scanning calorimetry (nDSC) showed that SiNP shifted the insulin endothermic peak to higher temperatures. The influence of coating on the interaction of nanoparticles with dipalmitoylphosphatidylcholine (DPPC) biomembrane models was also evaluated by nDSC. The increase of ΔH values suggested a strong association of non-coated SiNP and those PEGylated nanoparticles coated with DPPC polar heads by forming hydrogen bonds and/or by electrostatic interaction. The mucoadhesive properties of nanoparticles were examined by studying the interaction with mucin in aqueous solution. SiNP coated with alginate or chitosan showed high contact with mucin. On the other hand, non-coated SiNP and PEGylated SiNP showed lower interaction with mucin, indicating that these nanoparticles can interdiffuse across mucus network. The results of the present work provide valuable data in assessing the in vitro performance of insulin-loaded SiNP coated with mucoadhesive polymers.

Physicochemical characterization of epigallocatechin gallate lipid nanoparticles (EGCG-LNs) for ocular instillation

The encapsulation of epigallocatechin gallate (EGCG) in lipid nanoparticles (LNs) could be a suitable approach to avoid drug oxidation and epimerization, which are common processes that lead to low bioavailability of the drug limiting its therapeutic efficacy. The human health benefits of EGCG gained much interest in the pharmaceutical field, and so far there are no studies reporting its encapsulation in LNs. The purpose of this study has been the development of an innovative system for the ocular delivery of EGCG using LNs as carrier for the future treatment of several diseases, such as dry eye, age-related macular degeneration (AMD), glaucoma, diabetic retinopathy and macular oedema. LNs dispersions have been produced by multiple emulsion technique and previously optimized by a factorial design. In order to increase ocular retention time and mucoadhesion by electrostatic attraction, two distinct cationic lipids were used, namely, cetyltrimethylammonium bromide (CTAB) and dimethyldioctadecylammonium bromide (DDAB). EGCG has been successfully loaded in the LNs dispersions and the nanoparticles analysis over 30 days of storage time predicted a good physicochemical stability. The particles were found to be in the nanometer range (<300 nm) and all the evaluated parameters, namely pH, osmolarity and viscosity, were compatible to the ocular administration. The evaluation of the cationic lipid used was compared regarding physical and chemical parameters, lipid crystallization and polymorphism, and stability of dispersion during storage. The results show that different lipids lead to different characteristics mainly associated with the acyl chain composition, i.e. double lipid shows to have influence in the crystallization and stability. Despite the recorded differences between DTAB and DDAB, both cationic LNs seem to fit the parameters for ocular drug delivery.

Nanoemulsions (NEs), liposomes (LPs) and solid lipid nanoparticles (SLNs) for retinyl palmitate: effect on skin permeation

The aim of this study was to develop biocompatible lipid-based nanocarriers for retinyl palmitate (RP) to improve its skin delivery, photostability and biocompatibility, and to avoid undesirable topical side effects. RP loaded nanoemulsions (NEs), liposomes (LPs) and solid lipid nanoparticles (SLNs) were characterized in terms of size, surface electrical charge, pH, drug encapsulation efficiency and morphology. Spherical-shaped nanocarriers with a negatively charged surface (>|40|mV) and mean size lower than 275 nm were produced with adequate skin compatibility. The rheological properties showed that aqueous dispersions of SLNs followed a non-Newtonian behavior, pseudoplastic fluid adjusted to Herschel-Bulkley equation, whereas LPs and NEs exhibited a Newtonian behavior. SLNs offered significantly better photoprotection than LPs and NEs for RP. The cumulative amount of drug permeated through human skin at the end of 38 h was 6.67 ± 1.58 μg, 4.36 ± 0.21 μg and 3.64 ± 0.28 μg for NEs, LPs and SLNs, respectively. NEs flux was significantly higher than SLNs and LPs: NEs (0.37 ± 0.12 μg/h) > LPs (0.15 ± 0.09 μg/h) > SLNs (0.10 ± 0.05 μg/h). LPs offered significant higher skin retention than NEs and SLNs. Finally, even though all developed nanocarriers were found to be biocompatible, according to histological studies, NE was the system that most disrupted the skin. These encouraging findings can guide in proper selection of topical carriers among the diversity of available lipid-based nanocarriers, especially when a dermatologic or cosmetic purpose is desired.

Nanoemulsions and nanoparticles for non-melanoma skin cancer: effects of lipid materials

Basal cell carcinomas and squamous cell carcinomas are non-melanoma skin cancers reported to be among the most common malignancies, being responsible for high human morbidity. Conventional chemotherapy applied to these conditions shows non-specific targeting, thus severe adverse side effects are also commonly reported. New therapeutic strategies based on nanoparticulates technology have emerged as alternatives for site specific chemotherapy. Among the different types of nanoparticulates, lipid nanoemulsions and nanoparticles have several advantages for topical delivery of poorly soluble chemotherapeutics. These particles show sustained drug release and protection of loaded drugs from chemical degradation. This technology is promising to enhance the intracellular concentration of drugs and consequently reduce the cytotoxicity of skin chemotherapy.

Predictive modeling of insulin release profile from cross-linked chitosan microspheres

Insulin-loaded microspheres composed of chitosan 3% (w/v), and loading 120 IU insulin were produced by emulsion cross-linking method. Cross-linking time was 5 h and glutaraldehyde 3.5% (v/v) was used as cross-linker. Swelling ratio studies were evaluated to predict release of insulin from chitosan microspheres. Bacitracin and sodium taurocholate were incorporated in the formulations as proteolytic enzyme inhibitor and absorption enhancer, respectively. In vitro insulin release studies were performed in phosphate buffer pH 7.4 and also in HCl pH 2 with and without trypsin. Activity of bacitracin was also evaluated. In vitro release showed a controlled profile up to 12 h and the formulation containing 0.15% (w/v) of bacitracin revealed a maximum biological activity of about 49.1 ± 4.1%. Mathematical modeling using Higuchi and Korsmeyer-Peppas suggested a non-Fickian diffusion as the mechanism of insulin release. Insulin-loaded chitosan microspheres for oral delivery showed to be an innovative and reliable delivery system to overcome conventional insulin therapy.

Cross-linked chitosan microspheres for oral delivery of insulin: Taguchi design and in vivo testing

Insulin-loaded chitosan microspheres were engineered by emulsion cross-linking method using glutaraldehyde as cross-linker. Taguchi orthogonal method was applied to optimize the production time and reduce the number of experiments required to obtain an optimized formulation. Three variables were evaluated, i.e. chitosan and glutaraldehyde concentrations, and cross-linking time at three levels. The dependent variables were the mean particle size and the encapsulation efficiency. The optimal formulation was obtained with chitosan 3% (w/v), glutaraldehyde 3.5% (v/v), and cross-linking time of 5h, characterized by microspheres with a mean particle size of 29.5 μm, and insulin encapsulation efficiency of 71.6±1.3%. In vivo studies were carried out using male Wistar albino rats, revealing a significant reduction in blood glucose level after administration of the optimized formulation, in comparison to a subcutaneous insulin injection. Chitosan microspheres were superior in terms of sustaining protein release over conventional insulin therapy.