Disclosing the Biocide Activity of α-Ag2−2xCuxWO4 (0 ≤ x ≤ 0.16) Solid Solutions

In this work, α-Ag2−2xCuxWO4 (0 ≤ x ≤ 0.16) solid solutions with enhanced antibacterial (against methicillin-resistant Staphylococcus aureus) and antifungal (against Candida albicans) activities are reported. A plethora of techniques (X-ray diffraction with Rietveld refinements, inductively coupled plasma atomic emission spectrometry, micro-Raman spectroscopy, attenuated total reflectance–Fourier transform infrared spectroscopy, field emission scanning electron microscopy, ultraviolet–visible spectroscopy, photoluminescence emissions, and X-ray photoelectron spectroscopy) were employed to characterize the as-synthetized samples and determine the local coordination geometry of Cu2+ cations at the orthorhombic lattice. To find a correlation between morphology and biocide activity, the experimental results were sustained by first-principles calculations at the density functional theory level to decipher the cluster coordinations and electronic properties of the exposed surfaces. Based on the analysis of the under-coordinated Ag and Cu clusters at the (010) and (101) exposed surfaces, we propose a mechanism to explain the biocide activity of these solid solutions.

Photocurrent Response and Progesterone Degradation by Employing WO3 Films Modified with Platinum and Silver Nanoparticles

The effect of silver (Ag⁰ ) and platinum (Pt⁰ ) metallic nanoparticles (NPs) on WO₃ film was investigated by studying the photocurrent response under polychromatic irradiation. The structural phase revealed by X-ray diffraction analysis indicates a monoclinic crystal nanostructure. WO_3, Ag⁰ /WO_3, and Pt⁰ /WO₃ electrodes were used to degrade 0.35 mg L^-1 progesterone hormone in aqueous solution under polychromatic irradiation for 3h. The studies on degradation were investigated under electrochemically assisted heterogeneous photocatalysis (EHP) conditions. For photodegradation of progesterone, higher performance was achieved when WO₃ was functionalized and when the EHP configuration was adopted with bias at +0.7 V vs Ag/AgCl. This study reveals that incorporation of metallic NPs onto a semiconductor increases its efficiency, thereby preventing electron-hole recombination in the photocatalyst and photoelectrochemical limitations of WO₃ due to surface plasmon resonance and the trapping state. Therefore, efficient advances in the degradation of organic contaminants during water treatment can be realized.

Structural evolution, growth mechanism and photoluminescence properties of CuWO4 nanocrystals

Copper tungstate (CuWO₄) crystals were synthesized by the sonochemistry (SC) method, and then, heat treated in a conventional furnace at different temperatures for 1h. The structural evolution, growth mechanism and photoluminescence (PL) properties of these crystals were thoroughly investigated. X-ray diffraction patterns, micro-Raman spectra and Fourier transformed infrared spectra indicated that crystals heat treated and 100°C and 200°C have water molecules in their lattice (copper tungstate dihydrate (CuWO₄·2H₂O) with monoclinic structure), when the crystals are calcinated at 300°C have the presence of two phase (CuWO₄·2H₂O and CuWO₄), while the others heat treated at 400°C and 500°C have a single CuWO₄ triclinic structure. Field emission scanning electron microscopy revealed a change in the morphological features of these crystals with the increase of the heat treatment temperature. Transmission electron microscopy (TEM), high resolution-TEM images and selected area electron diffraction were employed to examine the shape, size and structure of these crystals. Ultraviolet-Visible spectra evidenced a decrease of band gap values with the increase of the temperature, which were correlated with the reduction of intermediary energy levels within the band gap. The intense photoluminescence (PL) emission was detected for the sample heat treat at 300°C for 1h, which have a mixture of CuWO₄·2H₂O and CuWO₄ phases. Therefore, there is a synergic effect between the intermediary energy levels arising from these two phases during the electronic transitions responsible for PL emissions.

Synthesis, growth mechanism, optical properties and catalytic activity of ZnO microcrystals obtained via hydrothermal processing

Herein we describe ZnO microcrystals obtainedviahydrothermal processing at 120, 150 and 180 °C, assisted by CTAB.

Experimental and theoretical investigations of electronic structure and photoluminescence properties of β-Ag2MoO4 microcrystals

In this paper, we investigate a correlation between theoretical calculations and experimental data to explain the electronic structure and optical properties of silver molybdate (β-Ag2MoO4) microcrystals synthesized by the microwave-assisted hydrothermal method. X-ray diffraction, Rietveld refinement, and micro-Raman spectroscopy confirmed that these microcrystals crystallize in a spinel-type cubic structure. Field-emission scanning electron microscopy images revealed that the processing temperatures influence in the final shape of microcrystals. Optical properties were analyzed by ultraviolet-visible diffuse reflectance spectroscopy; the increase in the optical band gap energy (Egap) (from 3.24 to 3.31 eV) with processing temperature is associated with the reduction of intermediary energy levels. First-principles quantum mechanical calculations based on the density functional theory at the B3LYP level were conducted. The calculated band structure revealed an indirect Egap of approximately 4.00 and 3.34 eV for the β-Ag2MoO4 without and with the formation of defects, respectively. Theoretical calculations based on density of states and electron density maps were employed to understand the polarization phenomenon induced by structural defects in the β-Ag2MoO4 crystals. Finally, photoluminescence properties at room temperature of β-Ag2MoO4 microcrystals were explained by the charge-transfer mechanism involving tetrahedral [MoO4] clusters.

Synthesis of (Ca,Nd)TiO3 powders by complex polymerization, Rietveld refinement and optical properties

Neodymium calcium titanate, (Ca(0.99)Nd(0.01))TiO(3) powders were synthesized by the complex polymerization method and heat treated at different temperatures for 2 h under air atmosphere. The structural evolution of these powders as a function of heat treatment temperature was analyzed by X-ray diffraction (XRD) and micro-Raman (MR) spectroscopy. The optical properties were investigated by Ultraviolet-visible (UV-vis) absorption spectroscopy and Photoluminescence (PL) measurements. XRD patterns, Rietveld refinement and MR spectra indicated that the powders heated treated at 750 degrees C for 2 h present an orthorhombic structure without secondary phases. UV-vis measurements suggested the presence of intermediary energy in disordered (Ca(0.99)Nd(0.01))TiO(3) powders. Broad and narrow bands were observed in the PL spectra of these powders when excited with 350 nm wavelength. The broad bands were associated to the structural defects and/or p-d electronic transitions while, the narrow bands were ascribed to f-f transitions arising from Nd(3+) ions.

Morphology and Photoluminescence of HfO(2) Obtained by Microwave-Hydrothermal

In this letter, we report on the obtention of hafnium oxide (HfO(2)) nanostructures by the microwave-hydrothermal method. These nanostructures were analyzed by X-ray diffraction (XRD), field-emission gum scanning electron microscopy (FEG-SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDXS), ultraviolet-visible (UV-vis) spectroscopy, and photoluminescence (PL) measurements. XRD patterns confirmed that this material crystallizes in a monoclinic structure. FEG-SEM and TEM micrographs indicated that the rice-like morphologies were formed due to an increase in the effective collisions between the nanoparticles during the MH processing. The EDXS spectrum was used to verify the chemical compositional of this oxide. UV-vis spectrum revealed that this material have an indirect optical band gap. When excited with 488 nm wavelength at room temperature, the HfO(2) nanostructures exhibited only one broad PL band with a maximum at around 548 nm (green emission).