Thermosensitive polymer-assisted extraction and purification of fungal laccase from citrus pulp wash effluent

BACKGROUND

This study explores the use of liquid-liquid extraction with thermosensitive polymers for producing laccase (Lac) from Pleurotus sajor-caju. This process leverages liquid waste from the citrus industry, specifically pulp wash. The research delves into extractive fermentation and thermoseparation, both processes being facilitated by a polymer exhibiting a lower critical solution temperature transition.

RESULTS

Key factors considered include the choice of polymer, its concentration, pH, separation temperature, and the behavior of the polymer-rich phase post-extractive fermentation concerning the lower critical solution temperature. Notably, under conditions of 45% by weight of Pluronic L-61 and pH 5.0 at 25 °C, the Lac resulted in an enhancement in the purification factor of 28.4-fold, compared with the Lac obtained directly from the fermentation process on the eighth day. There was an 83.6% recovery of the Lac enzyme in the bottom phase of the system. Additionally, the unique properties of Pluronic L-61, which can induce phase separation and also allow for thermoseparation, led to a secondary fraction (aqueous solution) of Lac with purification factor of 2.1 ± 0.1-fold (at 32 ± 0.9 °C and 30 ± 0.3 min without stirring) from the polymeric phase (top phase). Fourier-transform infrared analysis validated the separation data, particularly highlighting the α-helix content in the amide I region (1600-1700 cm-1 ).

CONCLUSION

In summary, the insights from this study pave the way for broader industrial applications of these techniques, underscoring benefits like streamlined process integration, heightened selectivity, and superior separation efficacy. © 2023 Society of Chemical Industry.

Toward efficient electrocatalytic degradation of iohexol using active anodes: A laser-made versus commercial anodes

The X-ray iodinated contrast medium iohexol is frequently detected in aquatic environments due to its high persistence and the inefficiency of its degradation by conventional wastewater treatments. Hence, the challenge faced in this study is the development of an alternative electrochemical treatment using active anodes. We investigate the oxidation of iohexol (16.42 mg L^-1) using different operating conditions, focusing on the role of different mixed metal oxide anodes in the treatment efficiency. The electrocatalytic efficiency of the Ti/RuO₂-TiO₂ anode prepared using a CO₂ laser heating and an ionic liquid is compared with Ti/RuO₂-TiO₂-IrO₂ and Ti/IrO₂-Ta₂O₅ commercial anodes. The hypochlorite ions generated by the anodes are also analyzed. The effect of the electrolyte composition (NaCl, Na₂SO₄, and NaClO₄) and current density (15, 30, and 50 mA cm^-2) on the iohexol degradation is also studied. The Ti/RuO₂-TiO₂ laser-made anode is more efficient than the commercial anodes. After optimizing experimental parameters, this anode removes 95.5% of iohexol in 60 min and displays the highest kinetic rate (0.059 min^-1) with the lowest energy consumption per order (0.21 kWh m^-3order^-1), using NaCl solution as the electrolyte and applying 15 mA cm^-2. Additionally, iohexol-intensified groundwater was used to compare the efficiency of anodes. The Ti/RuO₂-TiO₂ is also more efficient in removing the organic charge from the real water matrix (21.7% TOC) than the commercial anodes. Notably, the iohexol removal achieved is higher than all electrochemical treatments already reported using state-of-the-art non-active anodes in lower electrolysis time. Therefore, data from this study indicate that the electrochemical degradation of iohexol using the Ti/RuO₂-TiO₂ anode is efficient and has excellent cost-effectiveness; thus, it is a promising approach in the degradation of iohexol from wastewater. Furthermore, the Ti/RuO₂-TiO₂ active anode is competitive and can be an excellent option for treating effluents contaminated with recalcitrant organic compounds such as iohexol.

Pulp wash: a new source for production of ligninolytic enzymes and biomass and its toxicological evaluation after biological treatment

Pulp wash was used as substrate for the activity of ligninolytic enzymes of the fungus Pleurotus sajor-caju. Activity of laccase (Lac) and manganese peroxidase (MnP) as well as fungal biomass occurred under four conditions: different pulp wash concentrations, pH variation at the optimal pulp wash concentration, different glucose concentrations, and different concentrations of ammonium nitrate. The best enzyme activity and biomass production were obtained with in natura pulp wash and pH corrected to 5.0 (4884 IU/L Lac; 82 IU/L MnP; 25 g/100 mL biomass). However, the addition of glucose and ammonium nitrate to the pulp wash was not necessary for increasing the enzyme activity and biomass production. Efficient removal of pulp wash chemical oxygen demand (99.66%) and biochemical oxygen demand (83.27%) occurred after the mycoremediation with P. sajor-caju in the optimized conditions. Lactuca sativa L. seeds germination bioassay showed a four-fold reduction in the residue toxicity (EC₅₀ 28.72%) after the treatment with the fungus. Our findings are consistent with the notion that pulp wash is an excellent substrate for inducing the activity of ligninolytic enzymes and producing fungal biomass, and that the biological treatment is efficient to reduce effluent toxicity.

Pleurotus biomass production on vinasse and its potential use for aquaculture feed

The vinasse is a by-product generated during the manufacture of alcohol from sugarcane fermentation. Rich in organic matter, it is known that the vinasse has the potential to be used as a source of nutrients for plants as well as microorganisms. In this study, the fungi Pleurotus sajor-caju, P. ostreatus, P. albidus and P. flabellatus were cultivated in vinasse and utilised as a complementary diet for Danio rerio fish. The fungi mycelia cultured in vinasse for 15 days were lyophilised and offered to the fishes at a rate of 2% (medium/body weight) for 28 days. P. albidus produced the highest biomass (16.27 g L^-1). Bromatological analysis of mycelia showed similar values to commercial rations. Toxicity tests showed that fish survival was 100% and no significant biomass loss was observed, indicating that the tested fungi grown in vinasse showed no toxicity. Our results showed that vinasse is a promising by-product for fungal growth and the mycelia of Pleurotus sp. fungi can be included in the diets of fish as a nutritional supplement.

Genetic diversity of polysporic isolates of Moniliophthora perniciosa (Tricholomataceae)

The causal agent of witches' broom disease, Moniliophthora perniciosa is a hemibiotrophic and endemic fungus of the Amazon basin and the most important cocoa disease in Brazil. The purpose of this study was to analyze the genetic diversity of polysporic isolates of M. perniciosa to evaluate the adaptation of the pathogen from different Brazilian regions and its association with different hosts. Polysporic isolates obtained previously in potato dextrose agar cultures of M. perniciosa from different Brazilian states and different hosts (Theobroma cacao, Solanum cernuum, S. paniculatum, S. lycocarpum, Solanum sp, and others) were analyzed by somatic compatibility grouping where the mycelium interactions were distinguished after 4-8 weeks of confrontation between the different isolates of M. perniciosa based on the precipitation line in the transition zone and by protein electrophoresis through SDS-PAGE. The diversity of polysporic isolates of M. perniciosa was grouped according to geographic proximity and respective hosts. The great genetic diversity of M. perniciosa strains from different Brazilian states and hosts favored adaptation in unusual environments and dissemination at long distances generating new biotypes.