Graphene-based nanomaterials for the removal of emerging contaminants of concern from water and their potential adaptation for point-of-use applications

Considering the plethora of work on the exceptional environmental performance of 2D nanomaterials, there is still a missing link in addressing their practical application in point-of-use (POU) water treatment. By reviewing the exceptional environmental performance of 2D nanomaterials with specific emphasis on graphene and its derivatives, this review aims at inspiring further discussions and research in graphene-based POU water treatment with particular focus on the removal of emerging contaminants of concern (ECCs), which is largely missing in the literature. We outlined the prevalence of ECCs in the environment, their health effects both on humans and marine life, and the potential of efficiently removing them from water using three-dimensional graphene-based macrostructures to ensure ease of adsorbent recovery and reuse compared to nanostructures. Given various successful studies showing superior adsorption capacity of graphene nanosheets, we give an account of the recent developments in graphene-based adsorbents. Moreover, several cost-effective materials which can be easily self-assembled with nanosheets to improve their environmental performance and safety for POU water treatment purposes were highlighted. We highlighted the strategy to overcome challenges of adsorbent regeneration and contaminant degradation; and concluded by noting the need for policy makers to act decisively considering the conservative nature of the water treatment industry, and the potential health risks from ingesting ECCs through drinking water. We further justified the need for the development of advanced POU water treatment devices in the face of the growing challenges regarding ECCs in surface water, and the rising cases of drinking water advisories across the world.

An investigation into the hammer toe effects on the lower extremity mechanics and plantar fascia tension: A case for a vicious cycle and progressive damage

Hammer toes are one of the common deformities of the forefoot that can lead to compensatory changes during walking in individuals with this condition. Predicting the adverse effects of tissue damage on the performance of other limbs is very important in the prevention of progressive damage. Finite element (FE) and musculoskeletal modeling can be helpful by allowing such effects to be studied in a way where the internal stresses in the tissue could be investigated. Hence, this study aims to investigate the effects of the hammer toe deformity on the lower extremity, especially on the plantar fascia functions. To compare the joint reactions of the hammer toe foot (HTF) and healthy foot (HF), two musculoskeletal models (MSM) of the feet of a healthy individual and that of a participant with hammer toe foot were developed based on gait analysis. A previously validated 3D finite element model which was constructed using Magnetic Resonance Imaging (MRI) of the diabetic participant with the hammer toe deformity was processed at five different events during the stance phase of gait. It was found that the hammer toe deformity makes dorsiflexion of the toes and the windlass mechanism less effective during walking. Specifically, the FE analysis results showed that plantar fascia (PF) in HTF compared to HF played a less dominant role in load bearing with both medial and lateral parts of PF loaded. Also, the results indicated that the stored elastic energy in PF was less in HTF than the HF, which can indicate a higher metabolic cost during walking. Internal stress distribution shows that the majority of ground reaction forces are transmitted through the lateral metatarsals in hammer toe foot, and the probability of fifth metatarsal fracture and also progressive deformity was subsequently increased. The MSM results showed that the joint reaction forces and moments in the hammer toe foot have deviated from normal, where the metatarsophalangeal joint reactions in the hammer toe were less than the values in the healthy foot. This can indicate a vicious cycle of foot deformity, leading to changes in body weight force transmission line, and deviation of joint reactions and plantar fascia function from normal. These in turn lead to increased internal stress concentration, which in turn lead to further foot deformities. This vicious cycle cause progressive damage and can lead to an increase in the risk of ulceration in the diabetic foot.

An investigation of the ankle contact forces in a foot with hammer toe deformity. A comparison of patient-specific approaches using finite element modeling and musculoskeletal simulation

The internal forces and stresses in the tissue are important as they are linked to the risk of mechanical trauma and injuries. Despite their value, the internal stresses and forces cannot be directly measured in-vivo. A previously validated 3D finite element model (FEM) was constructed using Magnetic Resonance Imaging (MRI) of a person with diabetes and hammer toe deformity. The foot model simulated at five different instances during the stance phase of gait. The internal stress distribution on the talus that was obtained using the FEM simulation, was used to calculate the joint reaction force at the ankle joint. In addition, the musculoskeletal model (MSM) of the participant with hammer toe foot was developed based on the gait analysis and was used to determine the muscle forces and joint reactions. The result showed that the vertical reaction forces obtained from the FEM and MSM follow a similar trend through the stance phase of gait cycle and are significantly correlated ( R=0.99). The joint reaction forces obtained through the two methods do not differ for the first 25% of the gait cycle, while the maximum difference was ∼0.7 Body weight that was observed at 50% of the stance phase. Clinical Relevance: Finite element modeling and musculoskeletal simulation can shed light on the internal forces at the ankle in pathological conditions such as hammer toe. The similarities and differences observed in the joint reaction forces calculated from the two methods can have implications in assessing the effect of clinical interventions.

Associations between changes in loading pattern, deformity, and internal stresses at the foot with hammer toe during walking; a finite element approach

Over the past decade, Finite Element (FE) modelling has been used as a method to understand the internal stresses within the diabetic foot. Foot deformities such as hammer toe have been associated with increased risk of foot ulcers in diabetic patients. Hence the aim of this study is to investigate the influence of hammer toe deformity on internal stresses during walking. A 3D finite element model of the human foot was constructed based on capturing Magnetic Resonance Imaging (MRI) of a diabetic neuropathic volunteer exhibiting hammer toe. 3D gait measurements and a multi-body musculoskeletal model for the same participant were used to define muscle forces. FE simulations were run at five different instances during the stance phase of gait. Peak plantar pressure and pressure distribution results calculated from the model showed a good agreement with the experimental measurement having less than 11% errors. Maximum von Mises internal stresses in the forefoot hard tissue were observed at the 3^rd and 5^th metatarsals and 4^th proximal phalanx. Moreover, presence of hammer toe deformity was found to shift the location of maximum internal stresses on the soft tissue to the forefoot by changing the location of centre of pressure with internal stress 1.64 times greater than plantar pressure. Hammer toe deformity also showed to reduce the involvement of the first phalanx in internal/external load-bearing during walking. The findings of this study support the association between changes in loading pattern, deformity, and internal stresses in the soft tissue that lead to foot ulceration.

Laser-Evoked Vertex Potentials Predict Defensive Motor Actions

The vertex potential is the largest response that can be recorded in the electroencephalogram of an awake, healthy human. It is elicited by sudden and intense stimuli, and is composed by a negative–positive deflection. The stimulus properties that determine the vertex potential amplitude have been well characterized. Nonetheless, its functional significance remains elusive. The dominant interpretation is that it reflects neural activities related to the detection of salient stimuli. However, given that threatening stimuli elicit both vertex potentials and defensive movements, we hypothesized that the vertex potential is related to the execution of defensive actions. Here, we directly compared the salience and motoric interpretations by investigating the relationship between the amplitude of laser-evoked potentials (LEPs) and the response time of movements with different defensive values. First, we show that a larger LEP negative wave (N2 wave) predicts faster motor response times. Second, this prediction is significantly stronger when the motor response is defensive in nature. Third, the relation between the N2 wave and motor response time depends not only on the kinematic form of the movement, but also on whether that kinematic form serves as a functional defense of the body. Therefore, the N2 wave of the LEP encodes key defensive reactions to threats.

Treatment of gingival lichen planus with a free gingival graft: a case report

Lichen planus is an inflammatory dermatosis affecting the skin and mucous membrane. In oral lichen planus, the gingival tissue is often involved. Treatment is symptomatic and depends mostly on the administration of corticosteroids and tranquilizers. This report presents the case of a patient with gingival lichen planus who was treated with free gingival graft. Followup after 3 1/2 years showed that the lesions had completely disappeared.