Targeted elimination of molybdenum ions from a leaching solution with the ability of radiated grafting GMA-PAN nanofibers

In this study, electrospun polyacrylonitrile nanofibers were effectively functionalized for enhanced molybdenum ion adsorption through a multi-step approach. Initially, glycidyl methacrylate was grafted onto the nanofibers via irradiation-induced grafting polymerization, followed by chemical modification with various amino groups, with triethylamine identified as the optimal modifier. The impacts of key synthesis parameters and reaction conditions on grafting level and adsorption capacity were thoroughly investigated, with a focus on achieving maximum efficiency. The resulting nanofibers were characterized using FTIR, SEM, and BET techniques, confirming the successful modification and structural features conducive to adsorption. Furthermore, a comprehensive experimental design, incorporating a central composite design, yielded optimal conditions for molybdenum adsorption, with key parameters including monomer concentration, irradiation dose, adsorbent mass, initial concentration, time, pH, temperature, and amine concentration. The adsorption kinetics were effectively described by the pseudo-second-order model, while the Langmuir isotherm model provided valuable insight into the adsorption behavior. Impressively, the adsorbent exhibited exceptional adsorption efficiency, surpassing 98% even after six adsorption-desorption cycles using 0.5 M HCl. Thermodynamic analysis revealed the exothermic nature of the adsorption process, along with decreased entropy and overall spontaneity, underlining the favorable conditions for molybdenum adsorption. Notably, the synthesized adsorbent demonstrated notable selectivity for molybdenum and achieved an impressive adsorption capacity of 109.79 mg/g, highlighting its potential for practical applications in molybdenum removal from aqueous solutions.

Pathotypic and Phylogenetic Study of Diarrheagenic Escherichia coli and Uropathogenic E. coli Using Multiplex Polymerase Chain Reaction

BACKGROUND

Acute diarrheal disease and urinary tract infection are leading causes of childhood morbidity and mortality in the developing world. Diarrheagenic Escherichia coli (DEC) has been identified as a major etiologic agent of diarrhea worldwide, and urinary tract infection (UTI) caused by uropathogenic Escherichia coli (UPEC) is one of the most common bacterial infections among human beings. Quick and precise detection of these bacteria help provide more effective intervention and management of infection.

OBJECTIVES

In this study we present a precise and sensitive typing and phylogenetic study of UPEC and DEC using multiplex PCR in order to simplify and improve the intervention and management of diarrheal and UT infections.

MATERIALS AND METHODS

In total, 100 urinary tract infection samples (UTI) and 200 specimens from children with diarrhea, which had been diagnosed with E. coli as the underlying agent by differential diagnosis using MacConkey's agar and biochemical study, were submitted for molecular detection. Pathotyping of E. coli pathotypes causing urinary tract infection and diarrhea were examined using a two set multiplex PCR, targeting six specific genes. Phylogenetic typing was done by targeting three genes, including ChuA, YjaA and TspE4C2.

RESULTS

Overall, 88% of DEC and 54% of UTI isolates were positive for one or more of the six genes encoding virulence factors. Prevalence of the genes encoding virulence factors for DEC were 62%, 25%, 24%, 13%, 7% and 5% for ST (ETEC), LT (ETEC), aggR (EAggEC), daaD (DAEC), invE (EIEC) and eae (EPEC), respectively; whereas, the prevalence rates for the UTI samples were 23%, 14%, 6%, 6% and 4% for aggR (EAggEC), LT (ETEC), daaD (DAEC), invE (EIEC) and ST (ETEC), respectively. No coding virulence factors were detected for eae (EPEC). Group B2 was the most prevalent phylogroup and ST was the most frequently detected pathotype in all phylogroups.

CONCLUSIONS

ETEC and EAggEC were the most detected E. coli among stool and UTI samples, emphasizing the need to dedicate more health care attention to this group. In addition, our phylogenetic study may be helpful in figuring out the infection origin and for epidemiological studies. Nonetheless, more research studies with larger sample sizes are suggested for confirming our results.

Marginal Microleakage of Conventional Fissure Sealants and Self-Adhering Flowable Composite as Fissure Sealant in Permanent Teeth

OBJECTIVES

Application of sealants is a safe and effective way to prevent occlusal caries in the posterior teeth. A successful sealant therapy depends on good isolation. Decreased steps of adhesive application may enable proper isolation and use of self-adhering flowable composites for sealant therapy. This study sought to compare the marginal microleakage of fissure sealants and self-adhering flowable composites in permanent teeth.

MATERIALS AND METHODS

This in vitro, experimental study was conducted on 60 extracted human premolar teeth. The teeth were divided randomly into two groups of 30. In the first group, fissure sealant (Clinpro, 3M ESPE, USA) was placed on the teeth. In the second group, self-adhering flowable composite (Vertise Flow, Kerr, USA) was applied as the sealant. Then, both groups were immersed in 0.5% fuchsin dye solution for 24 hours. Sectioned samples were observed with a stereomicroscope for the extent of dye penetration. Data were analyzed using SPSS 21 and the Mann-Whitney test (P<0.05).

RESULTS

Microleakage in the fissure sealant group was significantly higher than that in the self-adhering flowable composite group (P<0.001).

CONCLUSION

Microleakage was less using self-adhering flowable composite compared to conventional fissure sealant; therefore, self-adhering flowable composite can be used as a suitable fissure sealant in permanent teeth.

Direct immunomodulatory influence of IFN-β on human astrocytoma cells

Astrocytes actively play a pivotal role in inflammatory disease intensity of central nervous system especially multiple sclerosis (MS). Although IFN-β is a selective therapy for MS but the role of IFN-β in stimulating the astrocytes to produce cytokines is not clearly revealed. Therefore, it is encouraging to assess the modulatory role of IFN-β on astrocytes of brain tissue. The aim of our study was to analyze the molecular mechanisms of recombinant IFN-β 1a directly affecting IL-10, iNOS, MMP-9 and TIMP-1 expression in central nervous system for the first time. In this way, in vitro procedures conducted by human astrocytoma A172 and 1321N1 cell lines as a model system. The total RNA from A172 and 1321N1 cells treated with IFN-β and LPS/IFN-γ/IFN-β and untreated cells were extracted and evaluated for IL-10, iNOS, MMP-9 and TIMP-1 expression by real-time RT-PCR. We found a significant dose-dependent increase in IL-10 gene expression in A172 and 1321N1 cells treated with IFN-β or LPS/IFN-γ/IFN-β. Moreover, a significant decrease was observed in iNOS expression suggesting a similar mechanism of action for both cells. Eventually there were no significant changes concerning the modulation of the MMP-9 and TIMP-1 in response to IFN-β treatment. In part, the immunomodulatory effect of IFN-β may be due to increase of IL-10 and suppression of iNOS expression in astrocytes of brain tissue.