The sensitivity enhancement of TiO2-based VOCs sensor decorated by gold at room temperature

Detection of hazardous toxic gases for air pollution monitoring and medical diagnosis has attracted the attention of researchers in order to realize sufficiently sensitive gas sensors. In this paper, we fabricated and characterized a Titanium dioxide (TiO₂)-based gas sensor enhanced using the gold nanoparticles. Thermal oxidation and sputter deposition methods were used to synthesize fabricated gas sensor. X-ray diffraction analysis was used to determine the anatase structure of TiO₂samples. It was found that the presence of gold nanoparticles on the surface of TiO₂enhances the sensitivity response of gas sensors by up to about 40%. The fabricated gas sensor showed a sensitivity of 1.1, 1.07 and 1.03 to 50 ppm of acetone, methanol and ethanol vapors at room temperature, respectively. Additionally, the gold nanoparticles reduce 50 s of response time (about 50% reduction) in the presence of 50 ppm ethanol vapor; and we demonstrated that the recovery time of the gold decorated TiO₂sensor is less than 40 s. Moreover, we explain that the improved performance depends on the adsorption-desorption mechanism, and the chemical sensitization and electronic sensitization of gold nanoparticles.

Gas Selectivity Enhancement Using Serpentine Microchannel Shaped with Optimum Dimensions in Microfluidic-Based Gas Sensor

A microfluidic-based gas sensor was chosen as an alternative method to gas chromatography and mass spectroscopy systems because of its small size, high accuracy, low cost, etc. Generally, there are some parameters, such as microchannel geometry, that affect the gas response and selectivity of the microfluidic-based gas sensors. In this study, we simulated and compared 3D numerical models in both simple and serpentine forms using COMSOL Multiphysics 5.6 to investigate the effects of microchannel geometry on the performance of microfluidic-based gas sensors using multiphysics modeling of diffusion, surface adsorption/desorption and surface reactions. These investigations showed the simple channel has about 50% more response but less selectivity than the serpentine channel. In addition, we showed that increasing the length of the channel and decreasing its height improves the selectivity of the microfluidic-based gas sensor. According to the simulated models, a serpentine microchannel with the dimensions W = 3 mm, H = 80 µm and L = 22.5 mm is the optimal geometry with high selectivity and gas response. Further, for fabrication feasibility, a polydimethylsiloxane serpentine microfluidic channel was fabricated by a 3D printing mold and tested according to the simulation results.

Effect of temperature and humidity on the sensing performance of TiO2nanowire-based ethanol vapor sensors

In this paper, we study the influence of two key factors, temperature, and humidity, on gas sensors based on titanium dioxide nanowires synthesized at 4 different temperatures and with different morphology. The samples' structure are investigated using SEM, XRD and FTIR analysis. The effects of humidity and temperature are studied by measuring the resistance and gas response when exposed to ethanol. At room temperature, we observed a 15% sensitivity response to 100 ppm of ethanol vapor and by increasing the operating temperature up to 180 °C, the response is enhanced by two orders of magnitude. The best operating temperature for the highest gas response is found to be around 180 °C. Also, it was observed that every nanowire morphology has its own optimum operating temperature. The resistance of sensors is increased at higher Relative Humidity (RH). Besides, the response to ethanol vapor experiences a gradual increase when the RH rises from 10% to 60%. On the other hand, from 60% to 90% RH the gas response decreases gradually due to different mechanisms of interaction of the TiO₂with H₂O and ethanol molecules.

Selection of monoclonal antibodies for the identification of lymphocyte surface antigens in the New World primate Saguinus oedipus oedipus (cotton top tamarin)

32 monoclonal antibodies reactive with human CD antigens were tested against tamarin peripheral blood lymphocytes, ConA blasts and lymphoblastoid B cell lines derived from tamarin cells. Reagents that cross-react with MHC class I and II, B cells (CD20, -21 and -23), monocytes (CD14) and NK cells (CD16, -56) have been identified. In addition monoclonals that cross-react with T cells (CD2, CD3), the CD4/CD8 subsets of T cells and the IL-2 receptor (CD25) are reported. A monoclonal against the beta chain of LFA-1 (CD18) cross-reacted strongly, but there was only a very poor cross-reaction with a monoclonal against the alpha chain of CD11a. Two monoclonals tested against ICAM-1(CD54) were negative.

Selection of monoclonal antibodies for the identification of lymphocyte surface antigens in the New World primate Saguinus oedipus oedipus (cotton top tamarin)

32 monoclonal antibodies reactive with human CD antigens were tested against tamarin peripheral blood lymphocytes, ConA blasts and lymphoblastoid B cell lines derived from tamarin cells. Reagents that cross-react with MHC class I and II, B cells (CD20, -21 and -23), monocytes (CD14) and NK cells (CD16, -56) have been identified. In addition monoclonals that cross-react with T cells (CD2, CD3), the CD4/CD8 subsets of T cells and the IL-2 receptor (CD25) are reported. A monoclonal against the beta chain of LFA-1 (CD18) cross-reacted strongly, but there was only a very poor cross-reaction with a monoclonal against the alpha chain of CD11a. Two monoclonals tested against ICAM-1(CD54) were negative.