Gas Chromatographic Determination of Deoxynivalenol in Wheat with Electron Capture Detection: Collaborative Study

Ten laboratories participated in a collaborative study of a method for the determination of deoxynivalenol in wheat by gas chromatography with electron capture detection. Each laboratory analyzed 6 samples in duplicate. Each collaborator received samples spiked at the 100.3, 501.3, and 1002.6 ng/g levels; a control sample; and 2 naturally contaminated samples. The average recovery (outliers excluded) for the spiked samples was 92.2%. The mean repeatability and reproducibility, respectively, were 32.2 and 41.3% for the spiked samples and 30.9 and 47.6% for the naturally contaminated samples. The method was adopted official first action.

Analysis of Ochratoxins A and B and Their Esters in Barley, Using Partition and Thin Layer Chromatography. I. Development of the Method

A convenient, specific, rapid method, developed for the determination of ochratoxin in barley, involves initial extraction of the sample with water-chloroform (1+9), followed by chromatography of the extract on an aqueous sodium bicarbonate-diatomaceous earth column. The ochratoxin esters are removed from the column with hexane-chloroform. Elution of the column with formic acid-chloroform (1+99) yields ochratoxins A and B. The ochratoxin esters are purified further on an aqueous sodium bicarbonate-methanol-diatomaceous earth column. The extracts are then quantitated on TLC plates by measuring fluorescence intensity. The presence of ochratoxins A and B is confirmed through formation of the corresponding ethyl ester derivatives. In an intralaboratory study, in which samples spiked at 25, 50, and 100 μg/kg levels were analyzed by 4 analysts, the average recovery for ochratoxin A was 81.2% with a lower detection limit of 12 μg/kg.

β-Cyclodextrin Post-Column Fluorescence Enhancement of Aflatoxins for Reverse-Phase Liquid Chromatographic Determination in Corn

β-Cyclodextrin enhances the fluorescence of aflatoxins B1 and G1 in aqueous systems. This effect was utilized in developing a unique reverse-phase liquid chromatographic (LC) method for determination of aflatoxins B1, B2, G1,and G2 (B1 detection limit 1 ppb), without preparing derivatives of B1 and G1. The aflatoxins are dissolved in methanol or the mobile phase for injection onto the LC system. Using a mobile phase of methanoI-β-cyclodextrin (1 + l), the aflatoxins are resolved on a C18 column. Fluorescence of the aflatoxins is enhanced by post-column introduction of an aqueous concentrated 0-cyclodextrin solution. All 4 aflatoxins elute within 10 min in the order G2, G1, B2, B1. Fluorescence responses for B1 and G1 standards were linear over the concentration range 0.5-10 ng, yielding correlation coefficients (r) of 0.9989 and 1.000, respectively. The average peak response ratio for G^B, for the mobile phase-enhancement solution described was 0.765 with a coefficient of variation (CV) of 0.98%. CVs were 6.2, 9.0, and 7.5% for multiple assays of aflatoxin B1 in 3 samples of naturally contaminated corn. For samples of corn spiked to a total B1 content of 8.3 ng/g, average B1 recovery was 90% (CV 11.7%)

Beta-cyclodextrin post-column fluorescence enhancement of aflatoxins for reverse-phase liquid chromatographic determination in corn

beta-Cyclodextrin enhances the fluorescence of aflatoxins B1 and G1 in aqueous systems. This effect was utilized in developing a unique reverse-phase liquid chromatographic (LC) method for determination of aflatoxins B1, B2, G1, and G2 (B1 detection limit 1 ppb), without preparing derivatives of B1 and G1. The aflatoxins are dissolved in methanol or the mobile phase for injection onto the LC system. Using a mobile phase of methanol-beta-cyclodextrin (1 + 1), the aflatoxins are resolved on a C18 column. Fluorescence of the aflatoxins is enhanced by post-column introduction of an aqueous concentrated beta-cyclodextrin solution. All 4 aflatoxins elute within 10 min in the order G2, G1, B2, B1. Fluorescence responses for B1 and G1 standards were linear over the concentration range 0.5-10 ng, yielding correlation coefficients (r) of 0.9989 and 1.000, respectively. The average peak response ratio for G1:B1 for the mobile phase-enhancement solution described was 0.765 with a coefficient of variation (CV) of 0.98%. CVs were 6.2, 9.0, and 7.5% for multiple assays of aflatoxin B1 in 3 samples of naturally contaminated corn. For samples of corn spiked to a total B1 content of 8.3 ng/g, average B1 recovery was 90% (CV 11.7%).

Use of ten gram samples of corn for determination of mycotoxins

Data were gathered, during a study on the development of an automated system for the extraction, cleanup, and quantitation of mycotoxins in corn, to determine if it was scientifically sound to reduce the analytical sample size. Five, 10, and 25 g test portions were analyzed and statistically compared with 50 g test portions of the same composites for aflatoxin concentration variance. Statistical tests used to determine whether the 10 and 50 g sample sizes differed significantly showed a satisfactory observed variance ratio (Fobs) of 2.03 for computations of pooled standard deviations; paired t-test values of 0.952, 1.43, and 0.224 were computed for each of the 3 study samples. The results meet acceptable limits, since each sample's t-test result is less than the published value of the /t/, which is 1.6909 for the test conditions. The null hypothesis is retained since the sample sizes do not give significantly different values for the mean analyte concentration. The percent coefficients of variation (CVs) for all samples tested were within the expected range. In addition, the variance due to sample mixing was evaluated using radioisotope-labeled materials, yielding an acceptable CV of 22.2%. The variance due to the assay procedure was also evaluated and showed an aflatoxin B, recovery of 78.9% and a CV of 11.4%. Results support the original premise that a sufficiently ground and blended sample would produce an analyte variance for a 10 g sample that was statistically comparable with that for a 50 g sample.

Use of Ten Gram Samples of Corn for Determination of Mycotoxins

Data were gathered, during a study on the development of an automated system for the extraction, cleanup, and quantitation of mycotoxins in corn, to determine if it was scientifically sound to reduce the analytical sample size. Five, 10, and 25 g test portions were analyzed and statistically compared with 50 g test portions of the same composites for aflatoxin concentration variance. Statistical tests used to determine whether the 10 and 50 g sample sizes differed significantly showed a satisfactory observed variance ratio (Fobs) of 2.03 for computations of pooled standard deviations; paired f-test values of 0.952, 1.43, and 0.224 were computed for each of the 3 study samples. The results meet acceptable limits, since each sample’s r-test result is less than the published value of the |t|, which is 1.6909 for the test conditions. The null hypothesis is retained since the sample sizes do not give significantly different values for the mean analyte concentration. The percent coefficients of variation (CVs) for all samples tested were within the expected range. In addition, the variance due to sample mixing was evaluated using radioisotopelabeled materials, yielding an acceptable CV of 22.2%. The variance due to the assay procedure was also evaluated and showed an aflatoxin B, recovery of 78.9% and a CV of 11.4%. Results support the original premise that a sufficiently ground and blended sample would produce an analyte variance for a 10 g sample that was statistically comparable with that for a 50 g sample.

Thin-Layer Chromatographic Determination of Sterigmatocystin in Cheese: Interlaboratory Study

A collaborative study of a method for the determination of sterigmatocystin in cheese was conducted by 10 laboratories. The study included control samples and samples spiked at levels of 5, 10, and 25 ppb, in coded blind pairs. Recoveries were 60.0, 90.7, and 59.3%, outliers excluded, for the respective levels. The mean reproducibilities, outliers excluded, were 81.97, 17.13, and 52.77%, respectively. Mean repeatabilities, outliers excluded, were 77.66,17.13, and 46.40%, respectively. Results of this collaborative study indicate that the method, modified as described in this report, is applicable to the determination of sterigmatocystin in cheese at low levels (5-50 ppb) for the purpose of surveys. With regard to the difficulty with thinlayer chromatography in this study, it is recommended that a more satisfactory determinative step be developed. Recommendation for official first action status is deferred

Thin-layer chromatographic determination of sterigmatocystin in cheese: interlaboratory study

A collaborative study of a method for the determination of sterigmatocystin in cheese was conducted by 10 laboratories. The study included control samples and samples spiked at levels of 5, 10, and 25 ppb, in coded blind pairs. Recoveries were 60.0, 90.7, and 59.3%, outliers excluded, for the respective levels. The mean reproducibilities, outliers excluded, were 81.97, 17.13, and 52.77%, respectively. Mean repeatabilities, outliers excluded, were 77.66, 17.13, and 46.40%, respectively. Results of this collaborative study indicate that the method, modified as described in this report, is applicable to the determination of sterigmatocystin in cheese at low levels (5-50 ppb) for the purpose of surveys. With regard to the difficulty with thin-layer chromatography in this study, it is recommended that a more satisfactory determinative step be developed. Recommendation for official first action status is deferred.

Gas chromatographic determination of deoxynivalenol in wheat with electron capture detection: collaborative study

Ten laboratories participated in a collaborative study of a method for the determination of deoxynivalenol in wheat by gas chromatography with electron capture detection. Each laboratory analyzed 6 samples in duplicate. Each collaborator received samples spiked at the 100.3, 501.3, and 1002.6 ng/g levels; a control sample; and 2 naturally contaminated samples. The average recovery (outliers excluded) for the spiked samples was 92.2%. The mean repeatability and reproducibility, respectively, were 32.2 and 41.3% for the spiked samples and 30.9 and 47.6% for the naturally contaminated samples. The method was adopted official first action.

Liquid chromatographic determination of ergot alkaloids in wheat

A method is described for the determination of individual ergot alkaloids in wheat. The sample is extracted with ethyl acetate-4% ammonium hydroxide (100 + 10), and the extract is cleaned up by liquid-liquid partition. The ergot alkaloids are resolved by liquid chromatography (LC), using a porous cross-linked polystyrene-divinylbenzene resin column and a mobile phase consisting of acetonitrile-0.05 M dibasic ammonium phosphate (55 + 45) buffered at pH 10.0. The ergot alkaloids ergonovine, ergonovinine, ergotamine, ergotaminine, alpha-ergocryptine, alpha-ergocryptinine, ergocristine, and ergocristinine are separated by LC and detected with a fluorescence detector. Recovery of ergot alkaloids added to wheat at levels of 16-760 ng/g averaged 85.6% with a coefficient of variation of 11.1%.

Thin Layer Chromatographic Determination of Sterigmatocystin in Cheese

A one-dimensional thin layer chromatographic method has been developed for determining sterigmatocystin in cheese. Cheese is extracted with acetonitrile—4% KC1 (85 + 15). A simplified liquid-liquid partition cleanup is used, and the sample extract is passed through a cupric carbonate column for final purification. Sterigmatocystin is visualized by spraying the plate with aluminum chloride. The fluorescence of the : spot is enhanced 10-fold by additional plate spraying with a silicone- ' ether mixture, enabling sterigmatocystin detection and quantitation at 2 land5 μg/kg, respectively. Average recoveries were 88.3 and 86.4% at the 10 and 25 μg/kg levels, respectively.

Thin layer chromatographic determination of sterigmatocystin in cheese

A one-dimensional thin layer chromatographic method has been developed for determining sterigmatocystin in cheese. Cheese is extracted with acetonitrile-4% KCl (85 + 15). A simplified liquid-liquid partition cleanup is used, and the sample extract is passed through a cupric carbonate column for final purification. Sterigmatocystin is visualized by spraying the plate with aluminum chloride. The fluorescence of the spot is enhanced 10-fold by additional plate spraying with a silicone-ether mixture, enabling sterigmatocystin detection and quantitation at 2 and 5 micrograms/kg, respectively. Average recoveries were 88.3 and 86.4% at the 10 and 25 micrograms/kg levels, respectively.

Determination of xanthomegnin in grains and animal feeds by liquid chromatography with electrochemical detection

A sensitive, highly selective liquid chromatographic (LC) method is described which uses electrochemical (EC) reduction of the analyte in the determinative step. The method is capable of determining xanthomegnin in mixed animal feeds and grains at levels ranging from 15 to 1200 ng/g. The method can detect as little as 0.5 ng xanthomegnin injected on the LC column. Xanthomegnin is extracted with chloroform and 0.1M phosphoric acid. An aliquot of the crude extract is purified by silica gel column chromatography using a Sep-Pak silica gel cartridge. A novel feature of the method is that xanthomegnin is "backed off" the column by reversing the flow of the eluant through the column. LC is then used to separate xanthomegnin from other interfering substances. Xanthomegnin is detected by EC reduction at -0.16 V. Recoveries of xanthomegnin added to samples at levels ranging from 15 to 1200 ng/g averaged 79% with a coefficient of variation of 7.9%. Results also demonstrate that this LC system can separate the related metabolites viomellein and rubrosulphin from each other and from xanthomegnin and that the same EC detection system can be used to detect these metabolites.

Determination of Xanthomegnin in Grains and Animal Feeds by Liquid Chromatography with Electrochemical Detection

A sensitive, highly selective liquid chromatographic (LC) method is described which uses electrochemical (EC) reduction of the analyte in the determinative step. The method is capable of determining xanthomegnin in mixed animal feeds and grains at levels ranging from 15 to 1200 ng/g. The method can detect as little as 0.5 ng xanthomegnin injected on the LC column. Xanthomegnin is extracted with chloroform and 0.1M phosphoric acid. An aliquot of the crude extract is purified by silica gel column chromatography using a Sep-Pak silica gel cartridge. A novel feature of the method is that xanthomegnin is "backed off' the column by reversing the flow of the eluant through the column. LC is then used to separate xanthomegnin from other interfering substances. Xanthomegnin is detectd by EC reduction at −0.16 V. Recoveries of xanthomegnin added to samples at levels ranging from 15 to 1200 ng/g averaged 79% with a coefficient of variation of 7.9%. Results also demonstrate that this LC system can separate the related metabolites viomellein and rubrosulphin from each other and from xanthomegnin and that the same EC detection system can be used to detect these metabolites.

Determination of aflatoxins in peanut butter, using two liquid chromatographic methods: collaborative study

Two methods for determining aflatoxins in peanut butter, one using normal phase and the other reverse phase liquid chromatography (LC), were studied by 8 and 10 collaborators, respectively. Fluorescence detection was used for the determinative step in both methods. For reverse phase LC, aflatoxins B1 and G1 were converted to B2a and G2a; for normal phase LC, a silica gel-packed flow cell was placed in the irradiating light path of the detector. The samples included spiked and naturally contaminated peanut butter with total aflatoxin levels from about 5 to 20 ng/g and controls in a balanced pair design. For the normal phase LC method, recoveries of B1, B2, G1, and G2 from spiked samples averaged 79, 92, 74, and 88%, respectively; for the reverse phase method, the recoveries were 103, 104, 89, and 163%. For the normal phase LC method, pooled repeatabilities were 20, 23, 28, and 17% for B1, B2, G1, and G2, respectively; for the reverse phase method, the repeatabilities were 19, 22, 38, and 31%. For the normal phase method, pooled reproducibilities were 34, 33, 39, and 34% for B1, B2, G1, and G2, respectively; for the reverse phase method, the reproducibilities were 32, 46, 51, and 52%. Both methods show an improved limit of detection and better within-laboratory precision over current AOAC methods; however, between-laboratory precision is no better, and the reverse phase method shows evidence of interferences being measured. For these reasons and because of no benefits of present value, neither method was submitted for adoption as official first action.

Determination of Aflatoxins in Peanut Butter, Using Two Liquid Chromatographic Methods: Collaborative Study

Two methods for determining aflatoxins in peanut butter, one using normal phase and the other reverse phase liquid chromatography (LC), were studied by 8 and 10 collaborators, respectively. Fluorescence detection was used for the determinative step in both methods. For reverse phase LC, aflatoxins B1 and G1 were converted to B2a and G2a; for normal phase LC, a silica gel-packed flow cell was placed in the irradiating light path of the detector. The samples included spiked and naturally contaminated peanut butter with total aflatoxin levels from about 5 to 20 ng/g and controls in a balanced pair design. For the normal phase LC method, recoveries of B1, B2, G1, and G2 from spiked samples averaged 79, 92, 74, and 88%, respectively; for the reverse phase method, the recoveries were 103, 104, 89, and 163%. For the normal phase LC method, pooled repeatabilities were 20, 23, 28, and 17% for B1, B2, G1, and G2, respectively; for the reverse phase method, the repeatabilities were 19, 22, 38, and 31%. For the normal phase method, pooled reproducibilities were 34, 33, 39, and 34% for B1, B2, G1, and G2, respectively; for the reverse phase method, the reproducibilities were 32, 46, 51, and 52%. Both methods show an improved limit of detection and better within-laboratory precision over current AOAC methods; however, between-laboratory precision is no better, and the reverse phase method shows evidence of interferences being measured. For these reasons and because of no benefits of present value, neither method was submitted for adoption as official first action.

High pressure liquid chromatographic determination of xanthomegnin in grains and animal feeds

A high pressure liquid chromatographic (HPLC) method is described for the determination of xanthomegnin in grains and mixed animal feeds at levels ranging from 150 to 1200 ng/g. This is equivalent to actual amounts of xanthomegnin injected on the HPLC system at from 15 to 120 ng/injection. Xanthomegnin is extracted with chloroform and 0.1M phosphoric acid. An aliquot of the crude extract is purified by column chromatography using a commercially available silica gel cartridge. Xanthomegnin is then separated from the remaining interferences by HPLC with a reverse phase C-8 column, and subsequently determined by absorbance detection at 405 nm. Elapsed time for the method from initial extraction to final HPLC determination is approximately 1 h. Recoveries of xanthomegnin added to grains and animal feeds at levels from 150 to 1200 ng/g averaged 82% with a coefficient of variation of 10.2%.

High Pressure Liquid Chromatographic Determination of Xanthomegnin in Grains and Animal Feeds

A high pressure liquid chromatographic (HPLC) method is described for the determination of xanthomegnin in grains and mixed animal feeds at levels ranging from 150 to 1200 ng/g. This is equivalent to actual amounts of xanthomegnin injected on the HPLC system at from 15 to 120 ng/injection. Xanthomegnin is extracted with chloroform and 0.1M phosphoric acid. An aliquot of the crude extract is purified by column chromatography using a commercially available silica gel cartridge. Xanthomegnin is then separated from the remaining interferences by HPLC with a reverse phase C-8 column, and subsequently determined by absorbance detection at 405 nm. Elapsed time for the method from initial extraction to final HPLC determination is approximately 1 h. Recoveries of xanthomegnin added to grains and animal feeds at levels from 150 to 1200 ng/g averaged 82% with a coefficient of variation of 10.2%.

High Pressure Liquid Chromatographic Determination of Aflatoxins in Peanut Butter Using a Silica Gel-Packed Flowcell for Fluorescence Detection

A high pressure liquid chromatographic method has been developed for determining aflatoxins B1, B1 G1, and G2 in peanut butter. The method is based on extraction with acidified aqueous methanol, partition of the aflatoxins into methylene chloride, and purification of the extract on a 2 g silica gel column. The extracted aflatoxins are resolved on a microparticulate (10 μm) porous silica gel column in ca 10 min with a water-washed chloroform-cyclohexane-acetonitrile solvent that contains 2% isopropanol. The fluorescence detection system determines aflatoxins B1, B2, G1, and G2 at low levels, i.e., 0.25 ppb B1, 0.5 ppb G1, and 0.2 ppb B2 and G2. Multiple assays of 5 samples of naturally contaminated peanut butters containing total aflatoxins (B1 + B2 + G1 + G2) at levels of 1,2,3, 9, and 17 ppb gave intralaboratory coefficients of variation of 7,4,4,11, and 3%, respectively. Samples spiked at levels of 5, 9, and 17 ppb total aflatoxins showed recoveries of 79, 81, and 81%, respectively.

High pressure liquid chromatographic determination of aflatoxins in peanut butter using a silica gel-packed flowcell for fluorescence detection

A high pressure liquid chromatographic method has been developed for determining aflatoxins B1, B2, G1, and G2 in peanut butter. The method is based on extraction with acidified aqueous methanol, partition of the aflatoxin into methylene chloride, and purification of the extract on a 2 g silica gel column. The extracted aflatoxins are resolved on a microparticulate (10 micrometer) porous silica gel column in ca 10 min with a water-washed chloroform-cyclohexane-acetonitrile solvent that contains 2% isopropanol. The fluorescence detection system determines aflatoxins B1, B2, G1, and G2 at low levels, i.e., 0.25 ppb B1, 0.5 ppb G1, and 0.2 ppb B2 and G2. Multiple assays of 5 samples of naturally contaminated peanut butters containing total aflatoxins (B1 + B2 + G1 + G2) at levels of 1, 2, 3, 9, and 17 ppb gave intralaboratory coefficients of variation of 7, 4, 4, 11, and 3%, respectively. Samples spiked at levels of 5, 9, and 17 ppb total aflatoxins showed recoveries of 79, 81, and 81%, respectively.

Survey for Aflatoxins and Zearalenone in Canned and Frozen Sweet Corn

Aflatoxins and zearalenone were determined in 263 samples of canned or frozen sweet corn, collected from packing plants during the 1976 and 1977 packing seasons. As anticipated from geographic, agronomic, and microbiological considerations, no aflatoxin or zearalenone was found. Based on this sampling, the highest incidence of detectable aflatoxin that could be statistically anticipated in the major packing areas is 1.5%.

Survey for aflatoxins and Zearalenone in canned and frozen sweet corn

Aflatoxins and zearalenone were determined in 263 samples of canned or frozen sweet corn, collected from packing plants during the 1976 and 1977 packing seasons. As anticipated from geographic, agronomic, and microbiological considerations, no aflatoxin or zearalenone was found. Based on this sampling, the highest incidence of detectable aflatoxin that could be statistically anticipated in the major packing areas is 1.5%.

Sample Preparation of Some Shelled Treenuts and Peanuts in a Vertical Cutter-Mixer for Mycotoxin Analysis

A procedure has been devised for more rapid preparation of large samples of nutmeats (10-80 lb) for mycotoxin analysis without the use of grinding aids, by combining the grinding and mixing steps into one operation. Ease of cleaning equipment facilitates the preparation of several samples in a short time. The procedure was tested using shelled raw and roasted peanuts, and raw almonds, walnuts, and pecans. The reduction of particle size to pass a 20 mesh screen was attained using a 25 qt Hobart vertical cutter-mixer (VCM) equipped with standard serrated blades and a 40 qt VCM using either a standard serrated blade or a smooth-edge blade modified with sharp-edge notches to increase its cutting ability. Portions of ground composite were removed at various time intervals and particle sizes were measured. Original and check analyses of 12 naturally contaminated samples over a 3 year period indicate that this procedure is practical and reproducible.

Survey for Aflatoxins and Zearalenone in 1973 Crop Corn Stored on Farms and in Country Elevators

A total of 315 marketable and 57 obviously damaged corn samples were collected at 116 different farms and country elevators located in the United States in counties selected from among those producing more than 1 million bushels of corn in 1972. The samples were analyzed for aflatoxins and zearalenone. The most striking correlations observed were between geographical area and mycotoxin contamination. Aflatoxin contamination was most frequently encountered in the Southeast-Appalachia areas with a 44% incidence of marketable corn with detectable aflatoxins. Zearalenone was most frequently encountered in the Corn Belt with a 10% incidence in marketable corn from that region. When mycotoxin contamination was found in an establishment, most of the samples from that establishment were contaminated. There was no correlation between mycotoxin contamination and storage practices nor could the observed contamination of marketable corn be related to the contamination of the obviously damaged grain. These observations plus correlations with the geographic incidence and aflatoxin level distribution of published field contamination data suggest the possibility of a common contamination mode.

Survey for aflatoxins and zearalenone in 1973 crop corn stored on farms and in country elevators

A total of 315 marketable and 57 obviously damaged corn samples were collected at 116 different farms and country elevators located in the United States in countries selected from among those producing more than 1 million bushels of corn in 1972. The samples were analyzed for aflatoxins and zearalenone. The most striking correlations observed were between geographical area and mycotoxin contamination. Aflatoxin contamination was most frequently encountered in the Southeast-Appalachia areas with a 44% incidence of marketable corn with detectable aflatoxins. Zearalenone was most frequently encountered in the Corn Belt with 10% incidence in marketable corn from that region. When mycotoxin contamination was found in an establishment, most of the samples from that establishment were contaminated. There was no correlation between mycotoxin contamination and storage practices nor could the observed contamination of marketable corn be related to the contamination of the obviously damaged grain. These observations plus correlations with the geographic incidence and aflatoxin level distribution of published field contamination data suggest the possibility of a common contamination mode.

Stability of aflatoxin M in milk

This three-part study was designed to determine aflatoxin M recovery from pasteurized and/or stored cow's milk. (a) Aflatoxin M was added to samples of raw Holstein milk at a concentration of 2.0 mug/liter. Half of each sample then was pasteurized at 63 C for 30 min, and both raw and pasteurized portions were stored at 4 C up to 17 days. (b) Samples of raw milk, pasteurized (77 C, 16 s) skim milk, dry cottage cheese curd, and cottage cheese whey were taken from a commercial operation in an area in which natural contamination had been encountered. (c) Milk from a cow dosed with aflatoxin B1 was stored frozen (-18 C) in bulk and in assay-size sample containers for 120 days. Aflatoxin M was recovered completely after either storage or pasteurization in (a) and (b). In (c), a recovery deficiency was detectable after 68 days of storage, which increased to 45% of the original value by 120 days. These observations differ from those of others in that loss of aflatoxin M was significant after pasteurization or storage of raw milk, totaling 87% loss after 120 days of frozen storage. Aflatoxin M partitioning between curd and whey in the preparation of cottage cheese agrees with more recent studies, but differs from previous reports. Three possible explanations for the differences are offered.