Loquat seed starch - Emerging source of non-conventional starch: Structure, properties, and novel applications

Recently, non-conventional sources of starch have attracted attention due to their potential to provide cost-effective alternatives to traditional starch. Among non-conventional starches, loquat (Eriobotrya japonica) seed starch is an emerging source of starch consisting of the amount of starch (nearly 20 %). Due to its unique structure, functional properties, and novel applications, it could be utilized as a potential ingredient. Interestingly, this starch has similar properties as commercial starches including high amylose content, small granule size, and high viscosity and heat stability, making it an attractive option for various food applications. Therefore, this review mainly covers the fundamental understanding of the valorization of loquat seeds by extracting the starch using different isolation methods, with preferable structural, morphological, and functional properties. Different isolation and modification methods (wet milling, acid, neutral and alkaline) are effectively used to obtain higher amounts of starch are revealed. Moreover, insight into various analytical techniques including scanning electron microscopy, differential scanning calorimetry, and X-ray diffraction used to characterize the molecular structure of the starch are discussed. In addition, the effect of shear rate and temperature on rheological attributes with solubility index, swelling power, and color is revealed. Besides, this starch contains bioactive compounds that have shown a positive impact on the enhancement of the shelf-life of the fruits. Overall, loquat seed starches have the potential to provide sustainable and cost-effective alternatives to traditional starch sources and can lead to novel applications in the food industry. Further research is needed to optimize processing techniques and develop value-added products that can be produced at a large scale. However, there is relatively limited published scientific evidence on the structural and morphological characteristics of loquat seed starch. Thus, in this review, we focused on different isolation techniques of loquat seed starch, its structural and functional characteristics, along with potential applications.

Evaluation of Cytotoxicity, Release Behavior and Phytopathogens Control by Mancozeb-Loaded Guar Gum Nanoemulsions for Sustainable Agriculture

Chemical fungicides are the backbone of modern agriculture, but an alternative formulation is necessary for sustainable crop production to address human health issues and soil/water environmental pollution. So, a green chemistry approach was used to form guar gum nanoemulsions (NEs) of 186.5-394.1 nm containing the chemical fungicide mancozeb and was characterized using various physio-chemical techniques. An 84.5% inhibition was shown by 1.5 mg/mL mancozeb-loaded NEs (GG-1.5) against A. alternata, comparable to commercial mancozeb (86.5 ± 0.7%). The highest mycelial inhibition was exhibited against S. lycopersici and S. sclerotiorum. In tomatoes and potatoes, NEs showed superior antifungal efficacy in pot conditions besides plant growth parameters (germination percentage, root/shoot ratio and dry biomass). About 98% of the commercial mancozeb was released in just two h, while only about 43% of mancozeb was released from nanoemulsions (0.5, 1.0 and 1.5) for the same time. The most significant results for cell viability were seen at 1.0 mg/mL concentration of treatment, where wide gaps in cell viability were observed for commercial mancozeb (21.67%) and NEs treatments (63.83-71.88%). Thus, this study may help to combat the soil and water pollution menace of harmful chemical pesticides besides protecting vegetable crops.

Microbe-Plant Interactions Targeting Metal Stress: New Dimensions for Bioremediation Applications

In the age of industrialization, numerous non-biodegradable pollutants like plastics, HMs, polychlorinated biphenyls, and various agrochemicals are a serious concern. These harmful toxic compounds pose a serious threat to food security because they enter the food chain through agricultural land and water. Physical and chemical techniques are used to remove HMs from contaminated soil. Microbial-metal interaction, a novel but underutilized strategy, might be used to lessen the stress caused by metals on plants. For reclaiming areas with high levels of heavy metal contamination, bioremediation is effective and environmentally friendly. In this study, the mechanism of action of endophytic bacteria that promote plant growth and survival in polluted soils-known as heavy metal-tolerant plant growth-promoting (HMT-PGP) microorganisms-and their function in the control of plant metal stress are examined. Numerous bacterial species, such as Arthrobacter, Bacillus, Burkholderia, Pseudomonas, and Stenotrophomonas, as well as a few fungi, such as Mucor, Talaromyces, Trichoderma, and Archaea, such as Natrialba and Haloferax, have also been identified as potent bioresources for biological clean-up. In this study, we additionally emphasize the role of plant growth-promoting bacteria (PGPB) in supporting the economical and environmentally friendly bioremediation of heavy hazardous metals. This study also emphasizes future potential and constraints, integrated metabolomics approaches, and the use of nanoparticles in microbial bioremediation for HMs.

Recovery of agricultural waste biomass: A path for circular bioeconomy

Circular bio-economy is a significant approach to resolving global issues elevated by environmental pollution. The generation of bioenergy and biomaterials can withstand the energy-environment connection as well as substitute petroleum-based materials as the feed stock production, thereby contributing to a cleaner and low-carbon-safe environment. Open discarding of waste is a major cause of environmental pollution in developing and under developed countries. Agricultural bio-wastes are obtained through various biological sources and industrial processing, signifying a typical renewable source of energy with ample nutrients and readily biodegradable organic substances. These waste materials are competent to decompose under aerobic and anaerobic conditions. The projected global population, urbanization, economic development, and changing production and consumption behavior result in bounteous bio-waste production. These bio-wastes mainly contain starch, cellulose, protein, hemicellulose, and lipids, which can operate as low-cost raw materials to develop new value-added products. Thus, this review discussed specifically the agricultural waste and valorization processes used to convert this waste into value-added products (biofuel, enzymes, antibiotics, ethanol and single cell protein). These value added products are used in the supply chain and enhance the overall performance of agriculture waste management, execution of circular bio-economy has attained significant importance and it explains a closed-loop system in which the potential resources remain in the loop, allowing them to be sustained into a new value.

Ecosystem Protection through Myco-Remediation of Chromium and Arsenic

The current study emphasizes fungi as an important tool against heavy metals and how isolated fungal species can be used to create a successful strategy for the bioremediation of chromium and arsenic-contaminated sites/soils. Globally, heavy metal pollution is a serious issue. In the current investigation, contaminated sites were chosen, and samples could be taken from various localities of Hisar (29.1492° N, 75.7217° E) and Panipat (29.3909° N, 76.9635° E), India. A total of 19 fungal isolates were obtained from the collected samples through the enrichment culture technique using PDA media supplemented with Cr as chromic chloride hexahydrate (50 mg/L) and As as sodium arsenate (10 mg/L) and the potential of fungal isolates to be used for the removal of heavy metals was examined. The isolates were screened for minimum inhibitory concentrations (MIC) exhibiting tolerance capabilities, and the four best isolates C1, C3, A2, and A6 with the highest MICs (>5000 mg/L), were chosen for further investigations. To use the chosen isolates in the remediation of heavy metals (Cr and As), the culture conditions were optimized. The fungal isolates C1 and C3 estimated the highest removal of 58.60% and 57.00% at 50 ppm chromium concentration, while the isolates A6 and A2 recorded the highest removal efficiency of 80% and 56% at 10 ppm arsenic concentration under optimal conditions. Finally, the chosen fungal isolates C1 and A6 were molecularly identified as Aspergillus tamarii and Aspergillus ustus, respectively.

Advances in Biopolymeric Nanopesticides: A New Eco-Friendly/Eco-Protective Perspective in Precision Agriculture

Pesticides are essential to contemporary agriculture and are required to safeguard plants from hazardous pests, diseases, and weeds. In addition to harming the environment, overusing these pesticides causes pests to become resistant over time. Alternative methods and agrochemicals are therefore required to combat resistance. A potential solution to pesticide resistance and other issues may be found in nanotechnology. Due to their small size, high surface-area-to-volume ratio, and ability to offer novel crop protection techniques, nanoformulations, primarily biopolymer-based ones, can address specific agricultural concerns. Several biopolymers can be employed to load pesticides, including starch, cellulose, chitosan, pectin, agar, and alginate. Other biopolymeric nanomaterials can load pesticides for targeted delivery, including gums, carrageenan, galactomannans, and tamarind seed polysaccharide (TSP). Aside from presenting other benefits, such as reduced toxicity, increased stability/shelf life, and improved pesticide solubility, biopolymeric systems are also cost-effective; readily available; biocompatible; biodegradable; and biosafe (i.e., releasing associated active compounds gradually, without endangering the environment) and have a low carbon footprint. Additionally, biopolymeric nanoformulations support plant growth while improving soil aeration and microbial activity, which may favor the environment. The present review provides a thorough analysis of the toxicity and release behavior of biopolymeric nanopesticides for targeted delivery in precision crop protection.

Assessment of Antifungal Efficacy and Release Behavior of Fungicide-Loaded Chitosan-Carrageenan Nanoparticles against Phytopathogenic Fungi

Biopolymeric Chitosan-Carrageenan nanocomposites 66.6-231.82 nm in size containing the chemical fungicide mancozeb (nano CSCRG-M) were synthesized following a green chemistry approach. The physicochemical study of nanoparticles (NPs) was accomplished using a particle size analyzer, SEM and FTIR. TEM exhibited clover leaf-shaped nanoparticles (248.23 nm) with mancozeb on the inside and entrapped outside. Differential scanning calorimetry and TGA thermogravimetry exhibited the thermal behaviour of the nanoform. Nano CSCRG-1.5 at 1.5 ppm exhibited 83.1% inhibition against Alternaria solani in an in vitro study and performed as well as mancozeb (84.6%). Complete inhibition was exhibited in Sclerotinia sclerotiorum at 1.0 and 1.5 ppm with the nanoformulation. The in vivo disease control efficacy of mancozeb-loaded nanoparticles against A. solani in pathogenized plants was found to be relatively higher (79.4 ± 1.7) than that of commercial fungicide (76 ± 1.1%) in pot conditions. Nanomancozeb showed superior efficacy for plant growth parameters, such as germination percentage, root-shoot ratio and dry biomass. The nanoformulation showed higher cell viability compared to mancozeb in Vero cell cultures at 0.25 and 0.50 mg/mL in the resazurin assay. CSCRG-0.5 showed slow-release behavior up to 10 h. Thus, these green nano-based approaches may help combat soil and water pollution caused by harmful chemical pesticides.

Proximate composition, polyphenols, and antioxidant activity of solid state fermented peanut press cake

The current research was led to assess the influence of solid-state fermentation (SSF) with Aspergillus oryzae (MTCC 3107) on polyphenols, antioxidant activities, and proximate composition from peanut press cake of variety HNG-10. Total phenolic, flavonoid, and tannin contents were calculated for polyphenols quantification whereas DPPH, ABTS, FRAP, and metal chelating assay were performed for antioxidant activity. Quantification of polyphenols was confirmed by High Performance Liquid Chromatography technique. Maximum value of total phenolic, flavonoid, and tannin content was found to be 25.55 µM/g GAE, 101.17 µM/g QE, and 245.33 µg/g TAE, respectively. The highest inhibition of free radicals scavenging was noticed on the 5th day of fermentation after that decreased gradually with the increase of fermentation time. Significant increase in fat, i.e. 7.05-12.80% and protein content i.e. 44.05-49.60% was observed. Significant difference in proximate composition of fermented and non-fermented press cake concluded that the progressive role of fermentation improved or transformed physico-chemical properties of substrates.

Fermentation: A Boon for Production of Bioactive Compounds by Processing of Food Industries Wastes (By-Products)

A large number of by-products or wastes are produced worldwide through various food industries. These wastes cause a serious disposable problem with the environment. So, now a day's different approaches are used for alternative use of these wastes because these by-products are an excellent source of various bioactive components such as polyphenols, flavonoids, caffeine, carotenoids, creatine, and polysaccharides etc. which are beneficial for human health. Furthermore, the composition of these wastes depends on the source or type of waste. Approximately half of the waste is lignocellulosic in nature produced from food processing industries. The dissimilar types of waste produced by food industries can be fortified by various processes. Fermentation is one of the oldest approaches and there are three types of fermentation processes that are carried out such as solid state, submerged and liquid fermentation used for product transformation into value added products through microorganisms. Selections of the fermentation process are product specific. Moreover, various studies were performed to obtain or fortified different bioactive compounds that are present in food industries by-products or wastes. Therefore, the current review article discussed various sources, composition and nutritive value (especially bioactive compounds) of these wastes and their management or augmentation of value-added products through fermentation.

In vitro assessment of bio-augmented minerals from peanut oil cakes fermented by Aspergillus oryzae through Caco-2 cells

Present study was carried out to assess the significances of solid state fermentation of peanut oil cakes (POC) by Aspergillus oryzae on in vitro bioavailability of minerals (iron, zinc and calcium) and cellular transport, retention and uptake from POC through Caco-2 cells. Bioavailability of iron, zinc and calcium of POC was examined by means of a combined simulated gastrointestinal digestion/Caco-2 cell system. Bio-augmentation of minerals of fermented POC attributed a positive, statistically significant increased influence on minerals retention, transport and uptake values when compared with that of respective inorganic salts as reference. Results revealed increased cellular ferritin content from fermented POC digests than the digests of free form of respective inorganic salt. In prospect of the present investigation the fermented POC samples showed significantly higher iron, zinc and calcium bioavailability and enormous possible health benefits.