Arthroplasty implant registries over the past five decades: Development, current, and future impact

Local, regional, and national registries have played an important role in the development of hip and knee arthroplasty and the treatment of patients with various maladies of these joints. Four arthroplasty registries stand out as leading forces behind the drive to popularize the use of registries and pursue the concept of evidence based medicine. The Mayo registry, started by Mark Coventry, is recognized as the oldest continuing registry for arthroplasty. The Harris Registry at Massachusetts General Hospital, along with the Mayo Registry, has greatly contributed to the advancement of arthroplasty surgery and have served an important role of identifying poorly performing implants and techniques in the United States. The Swedish Knee Arthroplasty Registry is the oldest national registry dedicated to joint arthroplasty and along with the Swedish Hip Arthroplasty Registry have established the infrastructure, analysis and reporting mechanisms, and leadership that has enabled other countries to subsequently develop national registries around the world. As more countries have adopted the concept of national registries, a new area of research is possible by pooling the resources of large registries as is now occurring with the Nordic countries. Several international organizations have been formed to promote future collaboration and develop international standards. The process of globalization of registries is a result of continued efforts over the past 50 years in improving and disseminating the knowledge gained from the early registries. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2319-2330, 2018.

Association between fixation technique and revision risk in total hip arthroplasty patients younger than 55 years of age. Results from the Nordic Arthroplasty Register Association

OBJECTIVES

To evaluate implant survival following primary total hip replacement (THR) in younger patients. To describe the diversity in use of cup-stem implant combinations.

DESIGN

29,558 primary THRs osteoarthritis (OA) patients younger than 55 years of age performed from 1995 through 2011 were identified using the Nordic Arthroplasty Registry Association database. We estimated adjusted relative risk (aRR) of revision with 95% confidence interval (CI) using Cox regression.

RESULTS

In general, no difference was observed between uncemented and cemented implants in terms of risk of any revision. Hybrid implants were associated with higher risk of any revision (aRR = 1.3, CI: 1.1-1.5). Uncemented implants led to a reduced risk of revision due to aseptic loosening (aRR = 0.5, CI: 0.5-0.6), whereas the risk was similar for hybrid and cemented implants. Compared with cemented implants, both uncemented and hybrid implants led to elevated risk of revision due to other causes, as well as elevated risk of revision due to any reason within 2 years. 183 different uncemented cup-stem implant combinations were registered in Denmark, of these, 172 were used in less than 100 operations which is similar to Norway, Sweden and Finland.

CONCLUSIONS

Uncemented implants perform better in relation to long-term risk of aseptic loosening, whereas both uncemented and hybrid rather than cemented implants in patients younger than 55 years had more short-term revisions because problems due to dislocation, periprosthetic fracture and infection has not yet been completely solved. The vast majority of cup-stem combinations were used in very few operations.

Stable fixation but unpredictable bone remodelling around the Lord stem: minimum 23-year follow-up of 66 total hip arthroplasties

Early designs of uncemented hip implants turned out to be failures mainly because the prerequisites for durable implant fixation were unknown. One exception was the chrome-cobalt stem of the Madreporic Lord prosthesis. We prospectively studied this prosthetic design in 107 hips that underwent surgery in 1979-1986. At the last follow-up, five stems and 54 cups had been revised, corresponding to stem and cup survival rates of 92%±3% and 45%±5% at 26years. In all, 66 hips with remaining Lord stems were available for clinical follow-up 26years (24-29) after the index operation. The mean total Harris hip and pain scores were 81 (SD 14) and 41 (SD 5).

Highly crosslinked polyethylene does not reduce aseptic loosening in cemented THA 10-year findings of a randomized study

BACKGROUND

Polyethylene (PE) wear particles are believed to cause aseptic loosening and thereby impair function in hip arthroplasty. Highly crosslinked polyethylene (XLPE) has low short- and medium-term wear rates. However, the long-term wear characteristics are unknown and it is unclear whether reduced wear particle burden improves function and survival of cemented hip arthroplasty.

QUESTIONS/PURPOSES

We asked whether XLPE wear rates remain low up to 10 years and whether this leads to improved implant fixation, periprosthetic bone quality, and clinical function compared to conventional PE.

METHODS

We randomized 60 patients (61 hips) to receive either PE or XLPE cemented cups combined with a cemented stem. At 10 years postoperatively, 51 patients (52 hips) were evaluated for polyethylene wear and component migration estimation by radiostereometry, for radiolucent lines, bone densitometry, and Harris hip and pain scores. Revisions were recorded.

RESULTS

XLPE cups had a lower mean three-dimensional wear rate between 2 and 10 years compared to conventional PE hips: 0.005 mm/year versus 0.056 mm/year. We found no differences in cup migration, bone mineral density, radiolucencies, functional scores, and revision rate. There was a trend toward improved stem fixation in the XLPE group. The overall stem failure rate was comparably high, without influencing wear rate in XLPE hips.

CONCLUSIONS

XLPE displayed a low wear rate up to 10 years when used in cemented THA, but we found no clear benefits in any other parameters. Further research is needed to determine whether cemented THA designs with XLPE are less prone to stem loosening.

LEVEL OF EVIDENCE

Level I, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.

The Nordic Arthroplasty Register Association: a unique collaboration between 3 national hip arthroplasty registries with 280,201 THRs

BACKGROUND AND PURPOSE

The possibility of comparing results and of pooling the data has been limited for the Nordic arthroplasty registries, because of different registration systems and questionnaires. We have established a common Nordic database, in order to compare demographics and the results of total hip replacement surgery between countries. In addition, we plan to study results in patient groups in which the numbers are too small to be studied in the individual countries.

MATERIAL AND METHODS

Primary total hip replacements (THRs) from 1995-2006 were selected for the study. Denmark, Sweden, and Norway contributed data. A common code set was made and Cox multiple regression, with adjustment for age, sex, and diagnosis was used to calculate prosthesis survival with any revision as endpoint.

RESULTS

280,201 operations were included (69,242 from Denmark, 140,821 from Sweden, and 70,138 from Norway). Females accounted for 60% of the patients in Denmark and Sweden, and 70% in Norway. Childhood disease was the cause of 3.1%, 1.8%, and 8.7% of the operations in Denmark, Sweden, and Norway, respectively. Resurfacing of hips accounted for 0.5% or less in all countries. The posterior approach was used in 91% of cases in Denmark, 60% in Sweden, and 24% in Norway. Cemented THRs were used in 46% of patients in Denmark, in 89% of patients in Sweden, and in 79% of patients in Norway. Of the 280,201 primary THRs, 9,596 (3.4%) had been revised. 10-year survival was 92% (95% CI: 91.6-92.4) in Denmark, 94% (95% CI: 93.6-94.1) in Sweden, and 93% (95% CI: 92.3-93.0) in Norway. In Denmark, 34% of the revisions were due to dislocation, as compared to 23% in Sweden and Norway. Replacement of only cup or liner constituted 44% of the revisions in Denmark, 29% in Sweden, and 33% in Norway.

INTERPRETATION

This unique common Nordic collaboration has shown differences between the countries concerning demographics, prosthesis fixation, and survival. The large number of patients in this database significantly widens our horizons for future research.

Outcome after total hip arthroplasty: Part II. Disease-specific follow-up and the Swedish National Total Hip Arthroplasty Register

The Swedish National Total Hip Arthroplasty Register records primary hip replacements, revisions and surgical technique/environmental factors. The end-point for failure is revision. A prosthesis still in place, however, does not mean success. Clinical and radiographic outcomes should describe in more detail the efficacy of hip replacement surgery instead of the relatively blunt outcome measure that the register can provide. We performed a clinical outcome analysis on patients with primary total hip replacement thus testing the adequacy of the end-point for failure in the Swedish register. 1,113 randomly selected patients who had had total hip replacement surgery between 1986 and 1995 answered a disease-specific self-administered questionnaire (WOMAC). A cohort of 344 patients was studied, using the Harris Hip Score and a conventional radiographic examination as outcome measures. We found clinical failure rates of 13% and 20% for all implants after 10 years, using 60 points or revision as the definition of failure in the Harris Hip Score and WOMAC, respectively. The result, according to the register during the same period, was a 7% revision rate. The clinical failure rate depended on the type of evaluation tool, definition of failure and demographics, which made it difficult to decide whether there was a need for revision. With the exception of pain measured by the Harris Hip Score, the results showed no significant correlation between clinical failure and radiographic failure. Hence, with the knowledge that there is a difference between the revision rate according to the register and clinical outcome, the strict definition of failure in the register is useful as an end-point for primary hip replacement surgery.

5-year experience of highly cross-linked polyethylene in cemented and uncemented sockets: two randomized studies using radiostereometric analysis

BACKGROUND

Laboratory tests and early clinical studies have shown that highly cross-linked polyethylene (PE) markedly improves wear resistance compared to conventional PE. We evaluated this type of PE in two randomized clinical studies using radiostereometric analysis (RSA). The 2- and 3-year follow-up of these studies have already been reported. We found a lower penetration rate for the highly cross-linked PE than for conventional PE. We now report the outcome after 5 years.

PATIENTS AND METHODS

60 patients (61 hips) with a median age of 55 years were randomized to receive either highly cross-linked PE (Durasul) or conventional cemented all-polyethylene sockets of the same design. 55 patients (56 hips) were followed for 5 years. In the second study, 32 patients (64 hips) with a median age of 48 years and with bilateral primary or secondary osteoarthritis of the hip had hybrid total hip arthroplasty with liners made of highly cross-linked PE (Longevity) on one side and conventional PE on the other. 23 patients in this study have passed the 5-year follow-up.

RESULTS

Bedding-in and creep for the Durasul all-PE was reached by 2 years, and by 1 year for the Longevity liners. In both control groups with conventional PE, this was reached by 6 months. The steady-state wear rate was close to zero in the two study groups and 0.06 mm/year for the conventional PE in the two control groups.

INTERPRETATION

We found that use of highly crosslinked PE instead of conventional PE reduced the wear by more than 95%, which supports continued use of this type of PE in young, active patients.

Standardized incidence rates of total hip replacement for primary hip osteoarthritis in the 5 Nordic countries: similarities and differences

BACKGROUND

The national hip registers of the Nordic countries provide an opportunity to compare age- and sex-standardized annual incidence of primary total hip replacement (THR) and types of implants used for primary hip osteoarthritis (OA) in Denmark, Finland, Iceland, Norway and Sweden.

METHODS

The data on THR were from the national total hip replacement registries, and population data were from the national statistics agencies. Annual incidence density per 100,000 was calculated for each 5-year age group and it was age-standardized using the WHO European standard population.

RESULTS

Crude country-specific annual incidence (all ages) for 1996-2000 varied between 73 and 90. WHO age-standardized annual incidence (all ages) varied between 61 (Finland) and 84 (Iceland). For the ages 50-89, comprising 94-98% of all THRs for OA, annual incidence varied between 217 (Finland) and 309 (Iceland). For Norway, the sex incidence ratio (women/men) was 2, and for the other countries it was between 1.1 and 1.3. The use of uncemented and hybrid replacements was considerably higher in Finland and Denmark than in the other countries.

INTERPRETATION

We found overall similarity in THR incidence between the 5 Nordic countries, but substantial differences between women and men, and in the use of different types of implant. Population-based, age-standardized and disease-specific information on THR incidence is required in order to properly explore the causes of differences in provision and practice of THR in different countries, regions and groups, and it will aid in projecting future needs.

Three hundred and twenty-one periprosthetic femoral fractures

BACKGROUND

The purpose of this study was to determine the demographics, incidence, and results of treatment of periprosthetic fractures in a nationwide observational study.

METHODS

In the years 1999 and 2000, 321 periprosthetic fractures were reported to the Swedish National Hip Arthroplasty Register. All of the associated hospital records were collected. At the time of follow-up, the Harris hip score, a health-related quality-of-life measure (the EuroQol-5D [EQ-5D] index), and patient satisfaction were used as outcome measurements. A radiologist performed the radiographic evaluation.

RESULTS

Ninety-one patients, with a mean age of 73.8 years, sustained a fracture after one or several revision procedures, and 230 patients, with a mean age of 77.9 years, sustained a fracture after a primary total hip replacement. Minor trauma, including a fall to the floor, and a spontaneous fracture were the main etiologies for the injuries. A high number of patients had a loose stem at the time of the fracture (66% in the primary replacement group and 51% in the revision group). Eighty-eight percent of the fractures were classified as Vancouver type B; however, there was difficulty with preoperative categorization of the fractures radiographically. There was a high failure rate resulting in a low short to mid-term prosthetic survival rate. The sixty-six-month survival rate for the entire fracture group, with reoperation as the end point, was 74.8% +/- 5.0%. One factor associated with fracture risk was implant design.

CONCLUSIONS

On the basis of these findings, we believe that high-risk patients should have routine radiographic follow-up. Such a routine could identify a loose implant and make intervention possible before a fracture occurred. Furthermore, we recommend an exploration of the joint to test the stability of the implant in patients with a Vancouver type-B fracture in which the stability of the stem is uncertain.

Presidential guest address: the Swedish Hip Registry: increasing the sensitivity by patient outcome data

The Swedish Hip Register was initiated in 1979. The mission of the register is to improve the outcome of THA. The hypothesis is that feedback of data stimulates participating clinics to reflect and improve. In addition to revision surgery, patient-based outcome measures and radiographic results are included to improve sensitivity. All patients who have a total hip arthroplasty answer a questionnaire preoperatively and again after 1, 6, and 10 years postoperatively. The questionnaire includes the Charnley classification, EQ-5D and visual analog scales concerning pain and overall satisfaction and is used by 31 of 81 units. Average costs for the procedure ($11,000) are obtained from a national database. The mean gain in the EQ-5D index after 1 year for 3900 patients was 0.37, giving a low cost of $3000 per quality adjusted life year. Patient satisfaction and pain amelioration generally was high. The national average 7-year survival (revision as endpoint), has improved from 93.5% (+/- 0.15) to 95.8 (+/- 0.15) between the two periods 1979 to 1991 and 1992 to 2003. National implant registers define the epidemiology of primary and revision surgery. In conjunction with individual subjective patient data and radiography they contribute to development of evidence-based THA surgery.

Periprosthetic femoral fractures classification and demographics of 1049 periprosthetic femoral fractures from the Swedish National Hip Arthroplasty Register

Postoperative femoral periprosthetic fracture is an uncommon complication of total hip arthroplasty surgery, but several centers worldwide have recently reported an increase in total numbers of such fractures. This severe complication is costly for society and results in high morbidity. Our analysis of 1049 periprosthetic fractures occurring in Sweden between 1979 and 2000 and recorded in the Swedish National Hip Arthroplasty Register focuses on patient- and implant-related factors, fracture classification, and fracture frequency. These were our 3 major findings: (1) a majority of the patients who sustained a late periprosthetic femoral fracture had a loose stem. (2) Implant-related factors are significantly associated with occurrence of a periprosthetic fracture. (3) Since the 1980s in Sweden, treatment results for periprosthetic fractures have been poor, with low long-term survivorship and a high frequency of complications. We have initiated further studies of this important problem.

The Otto Aufranc Award. Highly cross-linked polyethylene in total hip arthroplasty: randomized evaluation of penetration rate in cemented and uncemented sockets using radiostereometric analysis

The annual wear rate in polyethylene articulations should be 0.1 mm or less to avoid future osteolysis. Highly cross-linked polyethylene shows an 80 to 90% wear reduction in hip simulator testing, but the clinical documentation of this new polyethylene is still inadequate. We evaluated the highly cross-linked polyethylene in two prospective randomized clinical studies. Thirty-two patients (12 men, 20 women; 64 hips) with a median age of 48 years (range, 29-70 years) with bilateral primary or secondary arthrosis of the hip had hybrid total hip arthroplasty with liners made of highly cross-linked polyethylene on one side and conventional polyethylene on the other. Twenty-seven patients in this study have passed 2 years followup. A further group, comprised of 60 patients (61 hips) with a median age of 55 years (range, 35-70 years), was randomized to receive either highly cross-linked polyethylene or conventional cemented all-polyethylene of the same design. Forty-nine of these 60 patients have been observed for 3 years. In both studies all patients received Spectron stems with 28-mm Co-Cr heads. Radiostereometric examinations with the patient supine or standing were done at regular intervals. Wear was measured in the supine position from the first postoperative week, whereas standing examinations were initiated 3 months after the operation. The penetration rate almost was identical in the study and control groups at 6 months after the operation. Thereafter, the penetration rate leveled out in the two groups with highly cross-linked polyethylene. At 2 years the highly cross-linked polyethylene liner showed 62% lower proximal penetration and 31% lower total (three-dimensional) penetration when the patients were examined in supine position. The highly crosslinked all-polyethylene cemented cups showed lower proximal penetration in both positions. The better wear performance of highly cross-linked polyethylene could increase the implant longevity. Longer followup is needed to evaluate if this new material is associated with less occurrence of osteolysis.

Radiographic evaluation of Charnley cups used in first-time revision: repeated observations for 7-15 years

The radiographs of 46 consecutive polyethylene cups used in cemented first-time revision of the acetabulum were studied up to a mean of 10.7 years (range, 0.5-16.3 years). Six cups developed loosening, of which 2 were revised. New radiolucent lines appeared mainly up to the 3 years follow-up. Progression of radiolucencies to new regions was noted in 28 (61%) cups. This progression occurred as an increase in extension from the periphery to the central region of the interface, whereas the width only showed minor changes. Our findings indicate that even radiolucent lines with a width <1.0 mm should be given attention because these lines can surround the cup before significant migration (>5 mm) is established. True lateral radiographs exposed to visualize the interface add information concerning presence of loosening. According to our opinion, complete radiolucent lines on either the anterior-posterior or lateral view, with a width of 0.3 to 0.5 mm or more, should be regarded as radiographic failure.

Cemented first-time revision using Charnley cups: clinical outcome after 7 to 15 years follow-up

Forty-six consecutive polyethylene cups used in cemented first-time revision of the acetabulum were evaluated at repeated occasions up to mean 10.7 years (range, 0.5-16.3 years). At the last follow-up, 3 cups had been revised (6.5%), 2 because of loosening and 1 because of fracture of the acetabulum. Furthermore, 4 were radiographically loose, corresponding to a radiographic loosening rate of 13% and a mechanical failure rate (revision or radiographic loosening) of 15.2%. Presence of rheumatoid arthritis was the only predictor of mechanical failure (relative risk [RR] = 7.7, 95% confidence limits, 1.7-36.2; P =.002). In patients without rheumtoid arthritis, there was only 1 (2.6%) revision and 3 of 39 cases (7.7%) with mechanical failure. Recementation of a Charnley cup in first-time revisions results in a low failure rate in an elderly, nonrheumatoid arthritis population with small or moderate bone deficiencies.

Highly cross-linked polyethylene in cemented THA: randomized study of 61 hips

Highly cross-linked polyethylene (PE) has been introduced as an alternative bearing material in total hip arthroplasty (THA) because of high wear resistance in laboratory tests but the clinical experience of this material is limited. We evaluated a highly cross-linked PE (warm irradiated adiabatic melting, absorbed dose, 95 kGy) in a randomized study of cemented THAs. Cups of the same design but made of conventionally gamma irradiated PE (absorbed dose, 25-40 kGy) constituted the control group. Sixty-one hips (30 women, 30 men) with a median age of 55 years (range, 35-70 years) were included. All patients received a Spectron stem with 28-mm CoCr head. Radiostereometric examinations with the patient supine or standing were done at regular intervals. Wear was measured with the patient in the supine position from the first postoperative week, whereas examinations done with the patient standing were initiated 3 months after the operation. Dual x-ray absorptiometry and conventional radiography were used to evaluate the bone mineral density and the radiolucencies around the acetabular component. Fifty-two patients (53 hips; 25 highly cross-linked, 28 control) have been followed up for 2 years. At the 2-year followup, the highly cross-linked cups showed 50% reduction of proximal wear compared with the control group, when the patients were studied standing. When evaluated supine, the difference in proximal wear did not reach significance. The migration of the socket, the relative changes of periprosthetic bone mineral density, and the progression of radiolucencies between the immediately postoperative followup and 2-year followup did not differ. Highly cross-linked PE showed increase resistance to wear. Different mechanical properties of the two types of PE studied did not alter the performance of the cup in terms of fixation, periprosthetic bone loss, and radiographic appearance. However, the followup is short and these results are preliminary.

Kinematics of three variations of the Freeman-Samuelson total knee prosthesis

The effect of changes in the articulating surfaces on the kinematics of the Freeman-Samuelson total knee replacement was evaluated. Twenty-two patients (22 knees) (median age, 69 years) were randomized to a standard design with a fixed polyethylene bearing, a design with a mobile bearing, or a new design with a spherical medial femoral condyle with a fixed bearing. The patients were studied with radiostereometry and film-exchangers at 0 degrees nonweightbearing and during active weightbearing extension from 45 degrees to 15 degrees. The center of the tibial tray with a mobile-bearing prosthesis occupied a more anterior position than observed in the designs with a fixed bearing. The medial femoral condyle center had a more posterior position in the standard design than in the design with a spherical medial condyle. From a distally displaced position at 45 degrees, the medial condylar center displaced a mean of 1.8 mm proximally during extension in the standard design and had a constant position in the meniscal design. In the spherical design the medial condyle was displaced proximally at 45 degrees and displaced a mean of 1.6 mm distally during extension. The reduced anteroposterior and proximodistal translations in the meniscal design are compatible with improved congruency between the components. The design with a spherical medial condyle stabilized anteroposterior motions, but showed more pronounced proximodistal displacement medially than did the other two designs.

Evaluation of a femoral stem with reduced stiffness. A randomized study with use of radiostereometry and bone densitometry

BACKGROUND

Femoral stems with reduced stiffness were introduced in total hip arthroplasty to facilitate proximal load transfer and thereby reduce periprosthetic bone loss. Poor fixation and unacceptably high revision rates turned out to be a major problem with these prostheses. The purpose of the present study was to evaluate the early performance of a low-modulus stem (one that is less stiff) with the potential to address the problem of fixation by the use of a surface coating. The coating consisted of a titanium porous mesh proximally covered with a mixture of hydroxyapatite and tricalcium phosphate.

METHODS

Thirty-nine men and twenty-six women (sixty-eight hips) with noninflammatory arthritis were studied. The patients were randomized to receive either a porous-coated composite stem with reduced stiffness (Epoch) or a stiff stem with a porous coating (Anatomic). Both stems were inserted without cement, had a ceramic coating on the proximal two-thirds, and were supplied with tantalum beads. At the time of the operation, tantalum markers were also placed into the proximal part of the femur. The patients were followed for up to two years after the operation and were evaluated with use of repeated radiostereometric measurements, measurements of bone-mineral density, conventional radiography, and Harris hip scores.

RESULTS

Both stems showed optimum fixation with median subsidence and stem rotations that were close to zero. Repeated measurements of bone-mineral density revealed early loss of bone mineral in all Gruen regions in both treatment groups. The loss of bone mineral around the Epoch stems was significantly reduced at two years in Gruen regions 1, 2, 6, and 7 (p < 0.0005 to 0.04). Measurements on postoperative radiographs showed no difference in stem positioning or fill, but the Epoch stems had significantly more endocortical contact on both the anteroposterior (p < 0.0005) and the lateral radiograph (p = 0.02). At two years postoperatively, the Epoch stems had fewer sclerotic lines surrounding the stem (p = 0.002) and less sclerosis at the tip of the prosthesis (p = 0.001) compared with the Anatomic stems. The clinical results in terms of the Harris hip score, which was determined in all hips, and pain or discomfort, which was evaluated in thirty-seven hips treated at the same hospital, were not found to be different, with the numbers available.

CONCLUSIONS

Contrary to previous studies of other designs with reduced stiffness, the Epoch stem achieved excellent primary fixation. Despite this rigid fixation, the proximal loss of bone-mineral density was less than that associated with the stem with a stiffer design. These results should encourage additional long-term studies with a larger patient population.

A low stiffness composite biologically fixed prosthesis

The current authors addressed the question whether stress-induced adaptive bone remodeling of the proximal femur is a necessary consequence after total hip reconstruction with extensively biologically-fixed femoral components. A novel total hip femoral component was designed to simultaneously achieve stable skeletal fixation, structural durability, and reduced femoral stress shielding. This implant allowed for proximal and distal canal filling, yet was significantly less rigid than all-metallic femoral stems crafted of either cobalt chromium or titanium alloy. A cohort of 366 patients (386 hips) treated at 21 institutions worldwide now have been followed up a mean of 2.4 years postoperatively (range, 3 months-6 years). Two hundred sixty-eight patients have 2 years minimum followup. To date, no femoral implants have failed to achieve bone ingrowth and none have required revision. The implants appear radiographically well-fixed with no progressive radiolucencies or osteolysis. Radiostereometric analysis studies on one subset of patients showed stable initial fixation and minimal stem micromotion. Dual energy xray absorptiometry analysis on another subset of patients revealed excellent periprosthetic bone mineral density retention. Compared with more rigid metal implants, this design shows reduced proximal femoral bone loss secondary to stress-mediated bone resorption.

Charnley cups retained during revision of the femoral component: repeated clinical and radiographic observations of 49 cups for 7-15 years

This article concerns 49 consecutive polyethylene cups retained in cemented first revisions of the femoral component and evaluated on several occasions 7-15 years after the index operation. At the last follow-up 5 cups were revised, 3 were radiographically loose, 1 was revised because of recurrent dislocation and 1 stable cup was revised because the surgeon wished to use a 28 mm head. Moreover, 1 unrevised cup was radiographically loose. This corresponded to a mechanical failure rate of 0.1 (5/49) and revision rate of 0.1 (4/49). 3 cups which were radiographically loose (100% radiolucency) had not been revised when the stem was exchanged. If these cups were excluded, the revision rate would have dropped to 0.02 (1/46) and the mechanical failure rate to 0.04 (2/46). This indicates the importance of careful preoperative radiographic evaluation on both AP and lateral views. Progression of radiolucent lines always occurred as an increase in extension from the periphery to the central region of the interface. In conclusion, Charnley cups with non-circumferential radiolucent lines and little, if any, wear can be retained without compromising the longevity of the implant. However, it should be stressed that this conclusion is based on a patient population in which four-fifths of the patients at the index operation were 65 years of age or older.

Outcome of total hip replacement: a comparison of different measurement methods

During the past 40 years, improvements have been made in the technique, implant, and surgical environment for total hip replacement, which today is one of the most cost-effective operations done. The aim of this study was to compare different outcome measurement methods and to develop recommendations for optimal followup of total hip replacement. The study involved the outcome of 2604 randomly selected patients in Sweden treated surgically with a modern technique. General questionnaires (the Medical Outcomes Study 36-Item Short-Form Health Survey and the Nottingham Health Profile) were compared with disease-specific questionnaires (the Western Ontario and McMaster University Osteoarthritis Index and the Harris hip score). The study showed a good correlation between the studied questionnaires, and all questionnaires used could be suitable for followup study after hip replacement surgery. In clinical practice and for research, a general and disease-specific self-administered score should be used. Some patients (older and low cerebral capacity) have difficulties answering questions on these questionnaires. A new short self-administered general and disease-specific questionnaire was designed: the Total Hip Replacement score. The Total Hip Replacement score provides information about the result of the hip arthroplasty, and the results can be compared with results of other surgical interventions.

Correlation of wear debris-induced osteolysis and revision with volumetric wear-rates of polyethylene: a survey of 8 reports in the literature

This survey focused on clinical reports of polyethylene wear and osteolysis in total hip replacements. With regard to documentation of clinical wear-rates, 57 publications were reduced to an analysis of 8 reports of THR series, including the incidence of osteolysis. A direct correlation was found among volumetric wear-rates, incidence of osteolysis and revision rates in THR concepts of the 1983-1987 era. As volumetric wear rate increased, the incidence of osteolysis and revision rates increased. With regard to our grading system for volumetric wear, with follow-up in the 4-15 year range, osteolysis was rare in group A (wear = 0-80 mm3/year), ranging from 6% to 31% in group B (wear 40-80 mm3/year) and from 21% to 100% in group C (wear > 140 mm3/year). With regard to cup design, the optimal low-wear group had mainly cemented polyethylene cups with 22 and 28 mm head sizes. The mid-wear group B had metal-backed cemented and uncemented cups, with 28 mm head size, and the high-risk group C had only uncemented, metal-backed cups, with the highest wear in the 32 mm head size. Less than 10 years of follow-up did not distinguish adequately between different designs of THR, except in a few cases which had early failures due to material or design deficiencies. Overall, the cemented all-polyethylene cup combined with the smaller ball head proved to be better.

Concave versus posterior-stabilized tibial joint surface in total knee arthroplasty: randomized evaluation of 47 knees

Forty-seven knees in 43 patients with severe deformities randomly received AMK total knee arthroplasty with concave (C, n = 25) or posterior-stabilized (PS, n = 22) polyethylene insert and with resection of the posterior cruciate ligament. Radiostereometric examinations were done postoperatively and after 3, 12, and 24 months. Two patients (1 C, 1 PS) underwent revision surgery. At the 2-year follow-up, the median absolute rotations of the tibial inserts ranged from 0.13 degrees to 0.26 degrees (C vs PS; P =.1-.7). The maximum total point motion was almost identical in the 2 groups (C, 0.38; PS, 0.39; P =.9). Maximum subsidence, lift-off, and Hospital for Special Surgery scores did not differ (P =.1-.6). Recipients of 20 of 24 knees with concave design and 14 of 19 knees with posterior-stabilized design reported that their knee could be regarded as normal or almost normal. Variations of the configuration of the polyethylene insert did not alter the outcome in the short term.

In vivo kinematics of total knee arthroplasty: flat compared with concave tibial joint surface

This study evaluated the influence of the geometric configuration of the tibial joint area on the kinematics of the knee. Twenty-two patients with noninflammatory arthritis and minor preoperative deformity were studied. They each received an AMK total knee replacement with retention of the posterior cruciate ligament. Eleven patients without any knee abnormalities were used as controls. The patients were stratified to either the flat (terminology of the manufacturer: standard) or concave (terminology of the manufacturer: constrained) polyethylene insert (n = 11 in each group). Knee kinematics were assessed 1 year after the operation by having the patient ascend a platform corresponding to an extension of the knee from 50 to 70 degrees of flexion. During this motion, two film-exchangers simultaneously exposed six to 13 pairs of serial stereoradiographs. The concave geometric configuration of the tibial insert resulted paradoxically in increased anterior-posterior translations compared with the flat insert but no significant change of rotations and translations in the other directions. Compared with normal knees, the most obvious abnormality was increased anterior-posterior translations (p < 0.004). At 50 degrees of flexion, the implants with the flat tibial polyethylene insert had displaced 2 times and the concave ones had displaced 2.5 times more posteriorly than the normal knees (p < or = 0.001). Less internal tibial rotation was also recorded in the flexed positions for both types of inserts compared with the normal knees (p < 0.02). Four knees in four patients, who reported symptoms of instability and abnormal knee function, showed significantly increased proximal displacement of the center of the tibial plateau in the flexed position. The findings suggest that current prosthetic designs and surgical technique do not restore normal knee kinematics and indicate that design improvements should rely on in vivo kinematic studies.

Intramuscular pressure of the infra- and supraspinatus muscles in relation to hand load and arm posture

In work engaging the upper extremities, the musculoskeletal system of the shoulder is sometimes exposed to prolonged excessive load, leading to musculoskeletal disorders of the shoulder. One way of reducing work-related shoulder disorders is to establish guidelines for working postures. The purpose of this study was to identify harmful working positions, by performing a comprehensive survey of the intramuscular pressure (IMP) in the infra- and supraspinatus muscles in relation to different arm positions and external loads. Ten healthy males participated, and the IMP in the infra- and supraspinatus muscles was studied in a total of 112 combinations of arm positions and hand loads at levels that occur frequently in industrial work. High-precision spatial recordings were accomplished with a three-dimensional motion-analysis system, and the IMP was measured using the microcapillary infusion technique. The mean IMP of the infraspinatus muscle as well as that of the supraspinatus muscle increased continuously from a resting pressure at 0 degrees of upper arm elevation to a maximal pressure at 90 degrees of upper arm elevation, for all elevation planes. The mean IMP of the supraspinatus muscle appeared to be more dependent upon the elevation plane and less dependent upon the hand load, compared to the infraspinatus muscle. Even during only moderate arm elevation, the mean IMP of the infra- and supraspinatus muscles, presented here in polar diagrams, had already exceeded the levels of reduced recovery from local muscle fatigue and blood flow impairment. The elevation angle and the hand load primarily influence the development of IMP in the infra- and supraspinatus muscles.

Are the findings in the Swedish National Total Hip Arthroplasty Register valid? A comparison between the Swedish National Total Hip Arthroplasty Register, the National Discharge Register, and the National Death Register

The Swedish National Total Hip Arthroplasty (THA) Register was initiated in 1979, and it is one of the oldest quality registers in the world. The register covers all hospitals in Sweden, and today it contains > 205,000 hip arthroplasties. The failure endpoint definition in the register is revision. There is no information about quality of life and mortality. The aim of this study was to validate the results presented by the Swedish THA register by comparison with the Discharge register (the Swedish National Board of Health and Welfare) and to study mortality after hip arthroplasties. All hip arthroplasties from the Discharge register, performed in 1986 and thereafter, were compared with the Swedish THA register. Epidemiologic parameters, including mortality, were documented from the Swedish Death register. The mortality for primary THAs for men was 1% higher and for women 6% higher when compared with an age-matched and sex-matched cohort. For revision, the numbers were 7% and 9% higher. The risk for death compared with an age-matched and sex-matched population was lower for patients with osteoarthrosis treated with hip arthroplasty. The results with revision as failure endpoint showed that the Swedish THA register is reliable. The register includes >95% of the primary and revision THAs performed in Sweden between 1986 and 1995.

Tibial component fixation in porous- and hydroxyapatite-coated total knee arthroplasty: a radiostereo metric evaluation of migration and inducible displacement after 5 years

A total of 51 knees (45 patients) with osteoarthrosis were stratified in a randomized study to receive a hydroxyapatite-coated Freeman-Samuelson (FS HA) or a porous-coated Miller-Galante II (MG II) uncemented total knee arthroplasty. Repeated clinical, radiographic, and radiostereometric analysis (RSA) evaluations of the tibial components were done for 5 years. The clinical outcome was equal at the 5-year follow-up (mean Hospital for Special Surgery score, 93). Standard radiographs displayed more zones around the tibial stem in the MG II group. RSA revealed that the FS HA components migrated less (smaller maximum total point motion and maximum subsidence) after 5 years and showed less inducible displacements at the 1-year follow-up. The stability of the implants obtained is equal to or better than cemented implants after 5 years. Key words: knee prosthesis, cementless, hydroxyapatite, radiostereometry, inducible displacement.

Cemented first-time revisions of the femoral component: prospective 7 to 13 years' follow-up using second-generation and third-generation technique

In a prospective, consecutive study of first-time cemented femoral revisions, 109 hips were evaluated for a minimum of 7 years. There were 87 Charnley (18 standard, 69 long), 21 Spectron (3 standard, 18 long), and 1 Brunswick long-stem arthroplasties. There was an increased risk for rerevision in younger patients (P = .0001) and with use of standard stems (P = .002). Factors of importance for development of mechanical failure were younger age (P = .0001), presence of more pronounced bone defects (P < .005), use of standard stems (P < .0005), and presence of radiolucencies on the postoperative radiographs (Gruen zones 4 and 6) (P < .01). Our results confirm that cemented femoral revisions are a durable option in elderly patients, when improved cementing techniques and long-stem prostheses are used.

Outcome after total hip arthroplasty: Part I. General health evaluation in relation to definition of failure in the Swedish National Total Hip Arthoplasty register

The Swedish National Total Hip Arthroplasty register, which was started in 1979, is one of the oldest national quality registers in the world and consists of over 160,000 primary operations and 12,500 revisions. The register identifies risk factors for poor outcomes related to the patient, implant and surgical techniques. The end-point for failure, i.e., revision, does not provide information about the patient's general health after the primary procedure. The aim of this study was twofold. First, to validate the end-point for failure in the Swedish National Total Hip Arthroplasty register and secondly, to study general health after total hip arthroplasty. We validated the outcome of 1,056 primary THRs randomly selected from the Discharge register in Sweden by comparing the data to the Swedish THA register. These patients had answered the SF-36 and Nottingham Health Profile questionnaires. By comparing the clinical outcome, measured as general health, with the results obtained from the register, we evaluated the importance of the end-point for failure. We found that the end-point was useful, but further evaluations are desirable. Patients operated on with hip replacement do very well up to 10 years postoperatively and those who are not revised have good general health. The findings in this study can be used as a reference for others as it shows results from a national register, with a random selection of the study cohort.

Hydroxyapatite and tricalcium phosphate-coated cups with and without screw fixation: a randomized study of 64 hips

Sixty-two patients (64 hips) were provided with porous press-fit cups (Trilogy), plasma-sprayed with a coating consisting of 70% hydroxyapatite and 30% tricalcium phosphate. The patients were randomized to a cup with cluster holes for adjunctive screw fixation (n = 30) or to a cup without holes (n = 34). Radiostereometry was used to study migration and wear. Up to 2 years median translations and rotations <0.2 mm and <0.2 degrees were recorded in the 2 groups, without any difference. The median annual proximal wear (0.11 and 0.12 mm) was within the expected range despite the use of a ceramic coating, and it did not differ between the 2 designs. Radiolucent lines were frequently seen postoperatively but diminished during the follow-up without any sign of migration into the gaps. At 2 years, the median Harris scores were 99 points (range, 51-100 points) in the group with and 98 points (range, 69-100 points) in the group without screws. The results indicate that early fixation can be achieved for ceramic-coated press-fit cups without using additional screw fixation.

Survival of hip replacements. A comparison of a randomized trial and a registry

At the authors' hospital, 410 primary total hip replacements were performed on 372 patients between September 1, 1985, and May 31, 1989. All hips were assigned randomly to receive a Charnley prosthesis with an ogee flanged cup or a Spectron prosthesis with a metal backed cup. Eleven-year survivor analysis, using revision as the end point definition of failure, revealed a survival rate of 93.2% +/- 5.8% for the Charnley replacement and 95.9% +/- 3.0% for the Spectron. If each component of the systems was analyzed (concerning aseptic loosening), the ogee cup and the Spectron stem had 100% survival. The survivorship for all 410 hips was 94.5% +/- 3.4%. If the end point definition of failure was expanded to include patient dissatisfaction, the survival rate decreased to 86.3% +/- 4.9%. These survival rates were compared with the rates obtained by the Swedish National Hip Registry. The national cohort included all patients in Sweden who were treated surgically with a Charnley (14,053 patients) or Spectron (metal backed cup) prosthesis (726 patients) between September 1, 1985, and May 31, 1989. Eleven-year survivor analysis revealed a national survival rate of 92.1% +/- 0.7% for the Charnley replacement and 88.6% +/- 6.1% for the Spectron. The analyses from the Swedish Registry are based on more than 160,000 primary operations and 11,500 revisions. Despite the enormous amount of data, there are drawbacks, and registries never can replace the prospective, randomized trial. One reason is the Swedish National Registry is unable to discriminate between the individual cup and stem components when analyzing the cause of revision, and no clinical or radiographic information is collected. A potential drawback for the randomized trial is performance bias because surgeons from specialized centers might perform better than the general orthopaedic surgeon.

Long-term registration has improved the quality of hip replacement: a review of the Swedish THR Register comparing 160,000 cases

The Swedish Hip Register has defined the epidemiology of total hip replacement in Sweden. Most hip implants are fully cemented. Serious complications and rates of revision have declined significantly despite an increasing number of patients at risk. During the past 5 years, only 8-9% of hip replacements are revisions. Aseptic loosening with or without osteolysis is the major problem and constitutes 71% of the revisions, but the incidence had decreased three times during the past 15 years to less than 3% at 10 years. The effectiveness of the surgical technique is the most important factor for reducing the risk of revision because of aseptic loosening, but choice of implant is also important. In practice, total hip replacement in Sweden has improved, as judged by information from this Register about individualized patient risks, implant safety, and the greater efficacy of surgical and cementing techniques.

Assessment of workload and arm position during different work sequences: a study with portable devices on construction workers

It is recognised that work related shoulder pain is overrepresented among construction workers compared to other occupations. Studies have shown that working with hands above shoulder level increases the shoulder load. Most studies have been confined to the laboratory. The present project was carried out to map the muscular engagement and postures of construction workers undertaking ceiling fitting, and to compare the results to those of the laboratory studies. Two ambulatory devices were used, one allowing recording of electromyographic (EMG) signals bilaterally from the trapezius muscle, and the other to record the position of both arms and back by means of measuring the angles between the vertical line and the back and both upper arms. These recordings were performed during 1.5-2 h work sequences. The results show that the work was mostly performed in an upright position, that both arms were used to a similar amount and that the workers for a large proportion of their working time had their upper arms at levels that are considered harmful in view of shoulder load. The EMG data showed that nearly 50% of the work was spent with trapezius activity that exceeded that of the reference contraction used (about 15% of maximal voluntary contraction) and that the time spent in muscular relaxation was 10%. It was concluded that the exposure of construction workers undertaking ceiling fitting meets the criteria formulated on the basis of laboratory experiments with respect to a high risk of acquiring chronic shoulder pain, due to rotator cuff tendinitis.

The Charnley versus the Spectron hip prosthesis: clinical evaluation of a randomized, prospective study of 2 different hip implants

Prospective, randomized studies must be performed when new surgical techniques or implants are evaluated. In this study, a new implant system was compared with the Charnley prosthesis, which over the years has been the most used hip implant in Sweden. Between 1985 and 1989, 410 hips were randomized to treatment with a Charnley or a Spectron total hip arthroplasty: 206 Charnley and 204 Spectron prostheses were implanted. The patients were operated on by a standardized procedure using a contemporary cementing technique. The patients were followed prospectively by an independent observer after 1, 3, 5 to 6, and 10 years. Harris Hip Score and patient satisfaction were recorded in the outcome evaluation. A total of 144 patients with 164 hips were deceased, and 15 patients (8 Charnley and 7 Spectron) have required a revision. Nine hips were revised because of aseptic loosening (5 Charnley stems and 4 Spectron metal-backed cups). The Charnley stem as well as the metal-backed Spectron cup had a higher risk for revision because of aseptic loosening. The Charnley ogee cup and the Spectron stem have performed remarkably well with no revision of these components. Seven Charnley prostheses dislocated, but no dislocation was recorded in the Spectron group. Survivorship calculations with a mean follow-up of 10 years revealed an overall 11-year survivorship of 94.5% +/- 3.4% (Charnley, 93.2% +/- 5.8%; Spectron, 95.9% +/- 3.0%). The clinical outcome did not differ between the 2 systems. The overall results in this old population, using a contemporary surgical technique, illustrate that cemented hip arthroplasty is an excellent treatment alternative for elderly patients.

The Charnley versus the Spectron hip prosthesis: radiographic evaluation of a randomized, prospective study of 2 different hip implants

A total of 410 hips were randomized to treatment with either a Charnley (206 hips) or a Spectron (204 hips) total hip arthroplasty. The patients were operated on by a standardized procedure using a contemporary cementing technique and were followed after 1, 3, 5 to 6, and 10 years. The postoperative radiographs showed a significantly increased rate of malalignment and consequently low grade of cement mantle quality of the Charnley stem compared to the Spectron. No differences concerning cement mantle quality or positioning were found between the Charnley ogee cup and the metal-backed Spectron. Evaluation of the follow-up radiographs revealed 10 loose Charnley stems and 1 loose Spectron stem and 4 loose Charnley ogee cups and 23 loose Spectron metal-backed cups. The differences of revision rate for the femoral and acetabular components of the 2 prostheses were significant (P = .03, Charnley femoral component more frequent; P = .03, Spectron acetabular component more frequent). The radiographic evaluation strengthened this disparity. Poor wear characteristics of the metal-backed Spectron cup are perhaps the main reason for the highly significant difference in mechanical failure rate between the 2 cups. We therefore propose that metal-backing of cemented cups should be avoided, at least when combined with larger femoral heads. The difficulty in positioning the Charnley stem with an adequate cement mantle, especially in the absence of trochanteric osteotomy, might explain the inferior Charnley stem longevity in this study.

[Many years of registration have improved the quality of hip arthroplasty]

The Swedish Hip Replacement Registry has defined the epidemiology of total hip replacement in this country. Most hip replacements are fully cemented. Serious complication and revision rates associated with total hip replacement have declined significantly despite increase in the number of patients at risk. During the past five-year period, only 8(9 per cent of hip replacement procedures have been revisions. Although aseptic loosening with or without osteolysis is the major problem, accounting for 73 per cent of revisions, its incidence has decreased four-fold over the past 15 years to less than three per cent at 10-year follow-up. Quality of the surgical technique is the crucial determinant of the risk of revision due to aseptic loosening, but the choice of implant is also important. Total hip replacement practice in Sweden has improved due to the information available from the registry concerning individual risk factors, implant safety, and the efficacy of improving surgical and cementing techniques.

Porous cups with and without hydroxylapatite-tricalcium phosphate coating: 23 matched pairs evaluated with radiostereometry

Migration, wear, and presence of radiolucencies were studied in 23 matched pairs of patients operated with porous-coated acetabular cups with additional screw fixation. All implants had the same type of titanium fiber mesh. In each pair, one of the cups was plasma-sprayed with a coating consisting of 70% hydroxylapatite (HA) and 30% tricalcium phosphate (TCP). Radiostereometric analysis up to 2 years after the operation revealed smaller rotations around the horizontal axis in cups with HA/TCP coating. The migration of the cup center was not significantly influenced. Evaluation of femoral head penetration in 12 of the matched pairs did not reveal any significant difference. Immediately after operation, implants with HA/TCP coating had more central radiolucencies, which, despite minimal migration, disappeared during the follow-up. The clinical results did not differ between the 2 groups. The findings of less tilting and diminishing radiolucencies in the cups with HA/TCP coating suggest a more complete ingrowth of bone and a better sealing of the interface.

Poor outcome of the PCA and Harris-Galante hip prostheses. Randomized study of 171 arthroplasties with 9-year follow-up

155 patients (171 hips) with a mean age of 50 years (24-64) were randomized to uncemented PCA (84 hips) or Harris-Galante type I (87 hips) total hip arthroplasty. Clinical and radiographic evaluations were done regularly. The improvements in the Harris hip and pain scores did not differ. Osteolysis developed in 5 PCA and 17 Harris-Galante hips. 13 hips in the PCA and 16 in the Harris-Galante (HG) group were revised because of mechanical failures and 1 hip (HG) because of infection after a mean follow-up of 9 years. Decreased 10-year survival rate, based on revision as end-point, was noted for the PCA (85%), compared with the Harris-Galante cup (99%). The corresponding survival rate of the PCA stem (96%) was higher than that observed for the Harris-Galante design (86%). When radiographic failures were included, the survival rates of the 4 different components dropped to between 73% and 94%. These findings indicate that further revisions will be necessary and continuous radiographic follow-up is indicated to enable revision before severe bone destruction has occurred. Although the PCA and the Harris-Galante designs differed as regards the survival of the individual components, the overall clinical and radiographic survival rates of these cementless total hip arthroplasties were poor.

Recruitment of low threshold motor-units in the trapezius muscle in different static arm positions

A prevailing hypothesis for development of myalgia symptoms in the trapezius muscle is based on observations that in stereotypic activation of muscle the same low-threshold motor-units are the first ones to be recruited, and that these units are active throughout the contraction, until total relaxation. The theory suggests that these units are the first ones in monotonous repetitive work to be subject to degenerative processes, causing pain. The present project was undertaken to evaluate to what extent recruitment of motor-units in the trapezius muscle is position-specific, i.e. if there are motor-units that are recruited over a wide range of arm postures. Fine wire electrode pairs, inserted 2 cm lateral to the midpoint between the acromion and the C7 spinous processus, were used for signal acquisition. Methods for decomposition of the interference patterns were developed, allowing identification of single motor-units in signals registered in different arm positions. Voluntary recruitment of motor-units in the descending portion of the trapezius muscle was studied in 24 different arm positions (0-90 degrees shoulder flexion, 0-45 degrees humeral abduction, and 45-135 degrees elbow flexion) in three subjects. The results showed that the wire electrode technique and the signal processing algorithm employed allowed motor-unit identification in non-isometric conditions. It was found that low threshold motor-units in the trapezius muscle, active over a wide range of arm positions, could be identified in all three subjects. We refer to those as Cinderella, or C, units. These results support the research hypothesis addressed.

Ceramic coating improves tibial component fixation in total knee arthroplasty

Forty uncemented total knee arthroplasties (36 patients) were randomly allocated to a Miller-Galante II prosthesis with or without hydroxyapatite/tricalcium phosphate (HA/TCP) coating on the titanium fiber mesh on the undersurface of the tibial component. The patients were followed for 2 years with repeated radiostereometric examinations. After 2 years, the HA/TCP tibial components displayed smaller anterior-posterior tilt and less subsidence. The mean value of maximal total point motion was small: 0.5 mm in both groups. At 24 months, there were more radiolucent lines under the tibial tray and around the stem in the uncoated group, but the clinical results did not differ. HA/TCP coating on the undersurface of the tibial component improved the stability and seemed to improve the quality of the interface between the tibial component and the bone.

Fixation and metal release from the Tifit femoral stem prosthesis. 5-year follow-up of 64 cases

We stratified the fixation of the femoral component in 64 hips with degenerative joint disease into 3 groups, cemented (C), proximal hydroxyapatite coating (HA) or proximal porous coating (P). All implants had the same basic design and were made of TiAIV alloy. The migration of the implants was assessed by radiostereometry. After 5 years, the mean subsidences in the cemented and porous-coated groups were 0.16 and 0.31 mm, whereas the HA-coated implants displayed a mean proximal migration of 0.1 mm. 7 stems (2 C, 1 HA, 4 P) showed a continuous subsidence (> 0.25 mm) between the 2- and 5-year follow-up. 1 porous-coated stem was revised after the 2-year follow-up, because of pain and implant failure (previously reported) and 1 cemented stem was revised after 5 years because of pain and osteolysis. In a subset of patients, all with a femoral head made of aluminum oxide, the levels of metal were determined using atomic adsorption spectrometry. Subsidence of the stem between the 2- and 5-year follow-up was associated with increased levels of aluminum in the blood at 2 years. Generation of metallic particles from abrasive wear of the stem followed by third body abrasion of the ceramic femoral head could be one explanation of this finding. 5 hips which had shown high levels of titanium and aluminum in joint fluid at the 2-year follow-up displayed increased subsidence and developed proximal radiolucencies or osteolysis at the 5-year follow up. One of these was the cemented hip which was subsequently revised.

Specific or general health outcome measures in the evaluation of total hip replacement

We assessed 100 patients with a primary total hip replacement using the Harris hip score and the Nottingham Health Profile at one, three and five years after operation. They were derived from two prospective randomised series of cemented and uncemented replacements.

Both scoring systems correlated highly and were each heavily influenced by the system of functional classification defined by Charnley. After five years both reflected the function of the implant and the general state of the patient. A higher degree of sensitivity is needed to show differences in the performance of an implant in the short and medium term. We do not yet have an ideal system of clinical assessment and the overall function must always be properly assessed.

Specific or general health outcome measures in the evaluation of total hip replacement. A comparison between the Harris hip score and the Nottingham Health Profile

We assessed 100 patients with a primary total hip replacement using the Harris hip score and the Nottingham Health Profile at one, three and five years after operation. They were derived from two prospective randomised series of cemented and uncemented replacements. Both scoring systems correlated highly and were each heavily influenced by the system of functional classification defined by Charnley. After five years both reflected the function of the implant and the general state of the patient. A higher degree of sensitivity is needed to show differences in the performance of an implant in the short and medium term. We do not yet have an ideal system of clinical assessment and the overall function must always be properly assessed.

The effect of light manual precision work on shoulder muscles--an EMG analysis

In order to clarify if light manual precision work influences the activity of shoulder muscles, seven shoulder muscles were examined using electromyography (EMG) in five different arm positions in ten subjects. The subjects were asked to perform light precision work with the hand while maintaining the same arm position. The EMG activity in the shoulder muscles with the arm in specific positions was compared to the activity when manual precision work was added. The results were analysed statistically using a non-parametric method. We found an increased EMG activity in almost all arm positions and muscles. The increase was significant in four out of five arm positions regarding the infraspinatus and in three out of five positions concerning the levator scapulae. In the supraspinatus the increase was significant with the arm in its highest location. The average increase in shoulder muscle activity amounted to 22% of the resting activity.

Consequences of trapezius relaxation on the distribution of shoulder muscle forces: an electromyographic study

This study was focused on the ability to reduce voluntarily the muscle activity in the descending part of the trapezius muscle without changing the arm position or hand load, and its consequences on the distribution of shoulder muscle forces. Visual feedback techniques were used. Six different arm positions were investigated in 11 subjects. Electromyography was used for monitoring the muscle involvement. The selection of relevant muscles was performed by a model simulation of the shoulder using a newly developed biomechanical model of the human shoulder. The ability to reduce the muscle activity of the descending part of the trapezius was confirmed and the reduction ranged from 60 to 76% depending on the arm position. Among the muscles studied the rhomboid major and minor and the transverse part of the trapezius were affected the most, increasing their activity on the average to 232, 175 and 201% respectively, compared to the initial activity. The anterior part of the deltoid and the medial part of the serratus anterior also intensified their activity. The influence on the levator scapulae was, contrary to simulation results and to empirical knowledge, a decrease of the muscle activity. It is suggested that attention is given to the rhomboids and the transverse part of the trapezius when muscle activity is reduced in the descending part of the trapezius, for instance in biofeedback-based therapy. In conclusion, the study showed that reducing the trapezius activity caused a redistribution of muscle forces in the shoulder.

Life expectancy and cost utility after total hip replacement

In a prospective study of 410 cemented hip replacements in 372 patients with a mean age of 71 years, mortality after 8 years was 33%. Mortality for patients with osteoarthrosis was lower than in an age matched control population, probably because of a preoperative selection of patients. An estimate of costs and adjusted quality of life has shown that total hip replacement has a good cost utility even in the elderly patient. The conclusion of this study is that the indications for hip replacement in the elderly patient can be expanded. Such patients should undergo surgery earlier in the course of their disease.