Three-Dimensional Photonic Crystals Based on Porous Anodic Aluminum Oxide

Photonic crystals (PCs) consisting of a periodic arrangement of holes in dielectric media have found success in light manipulation and sensing. Among them, three-dimensional (3D) PCs are in high demand due to their unique properties originating from multiple photonic band gaps (PBGs) and even full ones. Here, 3D PCs based on porous anodic aluminum oxide (AAO) were fabricated for the first time. Our approach involves prepatterning of the aluminum surface by a focused ion beam to form a hexagonal array of pore nuclei. Subsequent anodization in 1 M H3PO3 using a sine wave profile of voltage provides AAO with a defect-free in-plane porous structure and out-of-plane porosity modulation. The ability to tune the position, width, and depth of the PBGs is demonstrated. The combination of the flexibility of the proposed approach with the unique properties of AAO extends the range of practical applications of 3D PCs far beyond the current achievements.

Stained Glass Effect in Anodic Aluminum Oxide Formed in Selenic Acid

A combination of the unique porous structure and physical and chemical properties of anodic aluminum oxide (AAO) makes it widely used in cutting-edge areas of materials science and nanotechnology. Selenic acid electrolyte provides the ability to obtain AAO with low porosity and high optical transparency and thus is promising for the preparation of AAO photonic crystals (PhCs). Here, we show the influence of crystallographic orientation of Al on the electrochemical oxidation rate in 1 M H2SeO4 as well as on the growth rate, porosity, and the effective refractive index of AAO. The cyclic anodization regime is used to prepare AAO PhCs with photonic band gaps, their wavelength positions are used to measure the AAO growth rate. At an anodization voltage of 40-45 V, the growth rate varies by up to 22.6% with crystallographic orientation of Al grains, causing the stained glass effect, which can be seen with the naked eye.

Mosaic of Anodic Alumina Inherited from Anodizing of Polycrystalline Substrate in Oxalic Acid

The anodizing of aluminium under oscillating conditions is a versatile and reproducible method for the preparation of one-dimensional photonic crystals (PhCs). Many anodizing parameters have been optimised to improve the optical properties of anodic aluminium oxide (AAO) PhCs. However, the influence of the crystallographic orientation of an Al substrate on the characteristics of AAO PhCs has not been considered yet. Here, the effect of Al substrate crystallography on the properties of AAO PhCs is investigated. It is experimentally demonstrated that the cyclic anodizing of coarse-grained aluminium foils produces a mosaic of photonic crystals. The crystallographic orientation of Al grains affects the electrochemical oxidation rate of Al, the growth rate of AAO, and the wavelength position of the photonic band gap.

New insight into anodization of aluminium with focused ion beam pre-patterning

The self-ordered anodic aluminium oxide (AAO) structure consists of micron-scale domains-defect-free areas with a hexagonal arrangement of pores. A substantial increase in domain size is possible solely by pre-patterning the aluminium surface in the form of a defect-free hexagonal array of concaves, which guide the pore growth during subsequent anodization. Among the numerous pre-patterning techniques, direct etching by focused gallium ion beam (Ga FIB) allows the preparation of AAO with a custom-made geometry through precise control of the irradiation positions, beam energy, and ion dosage. The main drawback of the FIB approach includes gallium contamination of the aluminium surface. Here, we propose a multi-step anodizing procedure to prevent gallium incorporation into the aluminium substrate. The suggested approach successfully covers a wide range of AAO interpore distances from 100 to 500 nm. In particular, anodization of FIB pre-patterned aluminium in 0.1 M phosphoric acid at 195 V to prepare AAO with the interpore distance of about 500 nm was demonstrated for the first time. The quantification of the degree of pore ordering reveals the fraction of pores in hexagonal coordination above 96% and the in-plane mosaicity below 3° over an area of about 1000μm². Large-scale defect-free AAO structures are promising for creating photonic crystals and hyperbolic metamaterials with distinct functional properties.

One-Dimensional Photonic Crystals with Nonbranched Pores Prepared via Phosphorous Acid Anodizing of Aluminium

One-dimensional photonic crystals (1D PhCs) obtained by aluminium anodizing under oscillating conditions are promising materials with structure-dependent optical properties. Electrolytes based on sulphuric, oxalic, and selenic acids have been utilized for the preparation of anodic aluminium oxide (AAO) 1D PhCs with sub-100-nm pore diameter. AAO films with larger pores can be obtained by anodizing in phosphorous acid at high voltages. Here, for the first time, anodizing in phosphorous acid is applied for the preparation of AAO 1D PhCs with nonbranched macropores. The sine wave profile of anodizing voltage in the 135–165 V range produces straight pores, whose diameter is above 100 nm and alternates periodically in size. The pore diameter modulation period linearly increases with the charge density by a factor of 599 ± 15 nm·cm²·C⁻¹. The position of the photonic band gap is controlled precisely in the 0.63–1.96 µm range, and the effective refractive index of AAO 1D PhCs is 1.58 ± 0.05.

Polarization-enhanced cell walls etching of anodic titanium oxide

Anodic titanium oxide (ATO) photonic crystals (PhCs) are promising for photonics, photocatalysis, and solar cells. A refractive index modulation in ATO PhCs is caused by the modulation of porosity and, thus, the pore diameter should be controlled precisely. The ATO cell walls etching in electrolyte solution during anodizing increases the porosity of the PhC structure and shifts the photonic band gap (PBG) position to shorter wavelengths. Until now, the ATO cell walls etching in organic based electrolytes has been associated solely with the chemical dissolution of ATO in fluoride-containing solutions. Here, a significant enhancement of cell walls etching is observed when electric current flows under anodic polarization. This effect leads to the blue shift of the PBG position with the number of periods of ATO PhC structure. Therefore, it is essential for the synthesis of ATO PhCs with a precise PBG position.

New approach to increase the sensitivity of Tb-Eu-based luminescent thermometer

The formation of trimetallic terbium-europium-gadolinium complexes was proposed as an approach to increase the sensitivity of the corresponding terbium-europium complexes for temperature measurement due to the suppression of multiphotonic emission. This approach results in over a 2-fold increase of the sensitivity of Eu-Tb carboxylate, which reached 5.3% K-1 in the physiological range.

Simple phase transfer of nanoparticles from aqueous to organic media using polymer colloids as carriers

A simple and versatile method of the phase transfer of nanoparticles from aqueous to organic media using charged polymer colloids as carriers is proposed.