Does the use of preheated restorative resin composite as a luting agent influence the adaptation of fixed dental prostheses? A systematic review

STATEMENT OF PROBLEM

Although studies have explored the physical and mechanical properties of different composite resins with the preheating technique, evidence that the use of preheated restorative composite resin as a luting agent influences the adaptation of fixed dental prostheses is lacking.

PURPOSE

The purpose of this systematic review was to answer the question: Does the use of preheated restorative composite resin as a luting agent influence the adaptation of fixed dental prostheses?

MATERIAL AND METHODS

Seven databases and nonpeer-reviewed literature were searched, without language or year restrictions. Studies directly comparing the adaptation of fixed dental prostheses cemented with preheated restorative composite resin or resin cement were considered eligible for inclusion. Assessment of the risk of bias was based on a 9-item checklist.

RESULTS

Of 2109 retrieved articles, 4 in vitro studies met the inclusion criteria. Three of them concluded that preheated restorative composite resin produced a greater mismatch than resin cement, and the remaining study reported that composite resin improved the adaptation of fixed dental prostheses. All included studies had a medium risk of bias. The high level of heterogeneity among the studies precluded meta-analysis.

CONCLUSIONS

The use of preheated restorative composite resin as a luting agent seems to negatively influence the adaptation of fixed dental prostheses. It was not possible to evaluate whether variables such as the formulation of the resin material or its heating time and temperature influence the adaptation of fixed dental prostheses because of the high heterogeneity of the included studies.

Influence of Specimen Dimension, Water Immersion Protocol, and Surface Roughness on Water Sorption and Solubility of Resin-Based Restorative Materials

The evaluation of water sorption and solubility is pivotal for the development of new resin-based restorative materials with the potential for clinical application. The purpose of the present study was to evaluate the influence of the specimen dimension, water immersion protocol, and surface roughness on the water sorption and solubility of three resin-based restorative materials. Disk-shaped specimens of 15 mm × 1 mm, 10 mm × 1 mm, and 6 mm × 1 mm were produced with a composite resin (Z100), a resin cement (RelyX ARC), and an adhesive system (Single Bond 2-SB2). The specimens were immersed in distilled water according to four protocols: ISO (all the specimens for each group were vertically immersed in 50 mL); IV-10 (the specimens were individually and vertically immersed in 10 mL); IH-10 (the specimens were individually and horizontally immersed in 10 mL); and IH-2 (the specimens were individually and horizontally immersed in 2 mL). The surface roughness (Sa and Sp) was evaluated using an atomic force microscope, and the degree of conversion was determined using FT-IR spectrometry. The specimen dimension and water immersion protocol had no effect on water sorption and solubility. For the three resin-based restorative materials, Sp was higher than Sa. The degree of conversion was not influenced by the specimen dimension. The variations in the specimen dimension and water immersion protocol compared to those determined by ISO 4049 did not prevent the comparison between the values of water sorption and solubility obtained for a given resin-based restorative material.

The Impact of Different Surface Treatments on Topography and Bond Strength of Resin Cement to Lithium Disilicate Glass Ceramic

OBJECTIVE

To evaluate the influence of different surface treatments on topography, surface roughness, surface energy, and microtensile bond strength stability of resin cement to lithium disilicate glass ceramic.

METHODS AND MATERIALS

Seventy disc-shaped specimens of IPS e.max Press were divided into seven groups according to the surface treatment: NT - non-treated (control); FSil - hydrofluoric acid (HF) + silane; FPSil - HF + phosphoric acid (HP) + silane; FUSil - HF + ultrasonic bath (U) + silane; FPUSil - HF + HP + U + silane; MEP - Monobond Etch and Prime (MEP); and MEPH - MEP + heating. Topography and surface roughness were evaluated using a 3D laser confocal microscope (3DLCM) and scanning electron microscopy (SEM) and surface energy with a goniometer. The microtensile bond strength (μTBS) was evaluated after storage in distilled water at 37°C for 24 hours and after thermocycling (5,000 cycles, 5°-55° C, 30-second dwell time). Data were analyzed using one-way ANOVA (surface roughness and surface energy), two-way ANOVA (μTBS), Tukey's HSD post-hoc test, and Student t-test (α=0.05).

RESULTS

FUSil, FPSil, and FSil presented similar and highest surface roughness, whereas NT, FPUSil, MEP, and MEPH showed similar, and lowest, roughness values (p<0.05). FPUSil, FPSil, FUSil, and FSil presented a similar and highest surface energy. NT, MEP, and MEPH showed similar and lowest surface energy.

CONCLUSION

Only FSil, FPSil, and MEPH maintained bond strength stability after thermocycling, with FPSil leading to less bond strength reduction, suggesting this protocol is more reliable for bonding resin cements to lithium disilicate glass ceramics.

Development, validation and application of a Brazilian knowledge scale about sports doping in dentistry

To evaluate the knowledge of Brazilian dentists of sports doping through the development, validation and application of the Brazilian Knowledge Scale about Sports Doping in Dentistry (B-KSSDD). A scale with 12 items was developed to assess a dentist's ability to determine whether the use of a medication characterised sports doping according to the World Anti-Doping Agency. A preliminary study to validate the B-KSSDD was carried out with 135 dentists, allowing the evaluation of ceiling and floor effects, convergent and discriminant validity, test-retest reliability and internal consistency of the instrument. A sample size calculation using the results of the preliminary study and the B-KSSDD was completed online using SurveyMonkey® by 270 participants from all regions of the country. The B-KSSDD showed evidence of convergent and discriminant validity, good temporal stability (ICC = 0.75) and internal consistency (alpha = 0.89). In the main study, the participants obtained an average score of 4.19/12 points on the B-KSSDD, suggesting that these professionals have insufficient knowledge about sports doping. The age of participants showed a negative association with knowledge about doping, while frequency of treating athletes and frequency of performing surgeries showed positive associations with knowledge about doping. The dentists had insufficient knowledge of the subject. Age of participants and frequency with which they attend to athletes are associated with knowledge about sports doping. Professional updating and education policies on doping are necessary for dentists, as athlete patients are at risk for severe sporting and financial penalties.

Tratamento de superfície para a cimentação adesiva de cerâmicas à base de zircônia: revisão de literatura

Objetivo: analisar, por meio de uma revisão da literatura, os diferentes métodos de tratamento de superfície de peças protéticas à base de zircônia e os seus efeitos sobre a cimentação adesiva. Material e Métodos: a seleção dos artigos foi realizada por meio de uma busca na base de dados PubMed/MEDLINE. A amostra final foi composta por 31 estudos publicados entre 2011-2016. Resultados: as cerâmicas à base de zircônia (ZrO2) têm propriedades importantes, como durabilidade química, alta tenacidade à fratura, módulo de elasticidade e dureza. Apesar da dificuldade de ligação da superfície da ZrO2 aos cimentos resinosos, estes são uma boa opção para unir as restaurações indiretas aos tecidos dentários. Entretanto, o condicionamento com ácido hidrofluorídrico e a silanização não melhoram a força de união entre o cimento resinoso convencional e cerâmica de alto conteúdo cristalino. Por esta razão, é necessário um modo de tratamento de superfície diferente para proporcionar uma força de ligação adequada. Conclusão: os estudos disponíveis sugerem que o jateamento com partículas de óxido de alumínio e a silicatização proporcionam rugosidade superficial e uma adequada resistência adesiva, no entanto, induzem à transformação de fase tetragonal em monoclínica. Por outro lado, a infiltração seletiva por vidro demonstra não gerar danos à superfície da ZrO2, porém, há a necessidade de mais pesquisas sobre esse recente método.

An in vitro microleakage evaluation of class V cavities restored with silorane-based resin composite using different adhesive systems

.