Innovative technology for ammonia abatement from livestock buildings using advanced oxidation processes

The feasibility of using advanced oxidation processes (AOPs) for abatement of ammonia from livestock buildings was examined in a series of pilot plant experiments. In this study, all the experiments were conducted in a two-step unit containing a dry photolytic reactor (UV₁₈₅/UV₂₅₄/O₃) and a photochemical scrubber (UV₂₅₄/H₂O₂). The unit efficiency was tested for two initial ammonia concentrations (20 and 35 ppmv) and three different air flows (150, 300 and 450 m³·h^-1). While the first step removes mainly organic pollutants that are often present together with ammonia in the air and ammonia only partially, the second step removes around 90% of ammonia emissions even at the highest flow rate of 450 m³·h^-1. Absorbed ammonia in the aqueous phase can be effectively removed without adjusting the pH (i.e. without the addition of other additives) using UV and ozone. Complete removal of ammonia was achieved after 15 h of irradiation. In order to assess the price efficiency of the suggested technology and to be able to compare it with other methods the figures-of-merit were determined. The price needed for lowering ammonia emission by one order of magnitude is 0.002 € per cubic meter of treated air at the highest flow rate of 450 m³·h^-1 and for initial ammonia concentrations of 20 ppmv. These findings demonstrate that AOPs are a promising method for ammonia abatement from livestock buildings which are rarely using any waste air treatment method.

Surface Plasmon Resonance Imaging Sensor for Detection of Photolytically and Photocatalytically Degraded Glyphosate

Glyphosate is one of the most widely used pesticides, which, together with its primary metabolite aminomethylphosphonic acid, remains present in the environment. Many technologies have been developed to reduce glyphosate amounts in water. Among them, heterogeneous photocatalysis with titanium dioxide as a commonly used photocatalyst achieves high removal efficiency. Nevertheless, glyphosate is often converted to organic intermediates during its degradation. The detection of degraded glyphosate and emerging products is, therefore, an important element of research in terms of disposal methods. Attention is being paid to new sensors enabling the fast detection of glyphosate and its degradation products, which would allow the monitoring of its removal process in real time. The surface plasmon resonance imaging (SPRi) method is a promising technique for sensing emerging pollutants in water. The aim of this work was to design, create, and test an SPRi biosensor suitable for the detection of glyphosate during photolytic and photocatalytic experiments focused on its degradation. Cytochrome P450 and TiO₂ were selected as the detection molecules. We developed a sensor for the detection of the target molecules with a low molecular weight for monitoring the process of glyphosate degradation, which could be applied in a flow-through arrangement and thus detect changes taking place in real-time. We believe that SPRi sensing could be widely used in the study of xenobiotic removal from surface water or wastewater.

Degradation of ammonia from gas stream by advanced oxidation processes

The reduction of ammonia emissions from air was experimentally investigated by advanced oxidation processes (AOPs) utilizing the combination of ultraviolet irradiation with ozone. The influence of operating conditions such as initial ammonia concentration and flow rate of gas on the reduction of ammonia concentration was investigated in homemade photochemical unit. The conversion of ammonia decreased with increasing initial concentration of ammonia and with increasing flow rate of air (decreasing retention time). The highest conversion of ammonia (97%) was achieved under lower initial concentration of ammonia (30 ppm) and lower flow rate of air (28 m³/h). The energy per order was evaluated for the advanced oxidation process too. The energy consumption was about 0.037 kWh/m³/order for the 97% ammonia conversion at 30 ppm of initial ammonia concentration and 28 m³/h flow rate of air. Based on the results, the advanced oxidation process combining the UV irradiation and ozone was effective for mitigation of ammonia concentration and presents a promising technology for the reduction of odor emissions from livestock buildings. Moreover, the AOPs are suitable for application for high flow rate of air, especially for ammonia abatement from livestock buildings, where very high efficiency is expected.

α-Fe2O3 Nanoparticles/Vermiculite Clay Material: Structural, Optical and Photocatalytic Properties

Photocatalysis is increasingly becoming a center of interest due to its wide use in environmental remediation. Hematite (α-Fe₂O₃) is one promising candidate for photocatalytic applications. Clay materials as vermiculite (Ver) can be used as a carrier to accommodate and stabilize photocatalysts. Two different temperatures (500 °C and 700 °C) were used for preparation of α-Fe₂O₃ nanoparticles/vermiculite clay materials. The experimental methods used for determination of structural, optical and photocatalytic properties were X-ray fluorescence (ED-XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), N₂ adsorption method (BET), diffuse reflectance UV-Vis spectroscopy (DRS), photoluminescence spectroscopy (PL) and photocatalytic reduction of CO₂, respectively. The data from XRD were confronted with molecular modeling of the material arrangement in the interlayer space of vermiculite structure and the possibility of anchoring the α-Fe₂O₃ nanoparticles to the surface and edge of vermiculite. Correlations between structural, textural, optical and electrical properties and photocatalytic activity have been studied in detail. The α-Fe₂O₃ and α-Fe₂O₃/Ver materials with higher specific surface areas, a smaller crystallite size and structural defects (oxygen vacancies) that a play crucial role in photocatalytic activity, were prepared at a lower calcination temperature of 500 °C.