1
|
Xu C, Bonfante G, Park J, Salles V, Kim B. Fabrication of an electrospun polycaprolactone substrate for colorimetric bioassays. Biomed Microdevices 2023; 25:32. [PMID: 37589770 PMCID: PMC10435419 DOI: 10.1007/s10544-023-00673-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 08/10/2023] [Indexed: 08/18/2023]
Abstract
Colorimetric assays rely on detecting colour changes to measure the concentration of target molecules. Paper substrates are commonly used for the detection of biomarkers due to their availability, porous structure, and capillarity. However, the morphological and mechanical properties of paper, such as fibre diameter, pore size, and tensile strength, cannot be easily tuned to meet the specific requirements of colorimetric sensors, including liquid capacity and reagent immobilisation. As an alternative to paper materials, biodegradable polymeric membranes made of electrospun polycaprolactone (PCL) fibres can provide various tunable properties related to fibre diameter and pore size.We aimed to obtain a glucose sensor substrate for colorimetric sensing using electrospinning with PCL. A feeding solution was created by mixing PCL/chloroform and 3,3',5',5'-tetramethylbenzidine (TMB)/ethanol solutions. This solution was electrospun to fabricate a porous membrane composed of microfibres consist of PCL and TMB. The central area of the membrane was made hydrophilic through air plasma treatment, and it was subsequently functionalized with a solution containing glucose oxidase, horseradish peroxidase, and trehalose.The sensing areas were evaluated by measuring colour changes in glucose solutions of varying concentrations. The oxidation reactions of glucose and TMB in sensor substrates were recorded and analysed to establish the correlation between different glucose concentrations and colour changes. For comparison, conventional paper substrates prepared with same parameters were evaluated alongside the electrospun PCL substrates. As a result, better immobilization of reagents and higher sensitivity of glucose were achieved with PCL substrates, indicating their potential usage as a new sensing substrate for bioassays.
Collapse
Affiliation(s)
- Chensong Xu
- Department of Precision Engineering, School of Engineering, The University of Tokyo, Tokyo, 153-8505, Japan
| | - Gwenaël Bonfante
- Institute of Industrial Science, The University of Tokyo, Tokyo, 153-8505, Japan
- LIMMS, CNRS-IIS UMI 2820, The University of Tokyo, Tokyo, 153-8505, Japan
| | - Jongho Park
- Institute of Industrial Science, The University of Tokyo, Tokyo, 153-8505, Japan
| | - Vincent Salles
- LIMMS, CNRS-IIS UMI 2820, The University of Tokyo, Tokyo, 153-8505, Japan
| | - Beomjoon Kim
- Institute of Industrial Science, The University of Tokyo, Tokyo, 153-8505, Japan.
| |
Collapse
|
2
|
Bourdon L, Attik N, Belkessam L, Chevalier C, Bousige C, Brioude A, Salles V. Direct-Writing Electrospun Functionalized Scaffolds for Periodontal Regeneration: In Vitro Studies. J Funct Biomater 2023; 14:jfb14050263. [PMID: 37233373 DOI: 10.3390/jfb14050263] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/13/2023] [Revised: 05/04/2023] [Accepted: 05/06/2023] [Indexed: 05/27/2023] Open
Abstract
Multiphasic scaffolds that combine different architectural, physical, and biological properties are the best option for the regeneration of complex tissues such as the periodontium. Current developed scaffolds generally lack architectural accuracy and rely on multistep manufacturing, which is difficult to implement for clinical applications. In this context, direct-writing electrospinning (DWE) represents a promising and rapid technique for developing thin 3D scaffolds with controlled architecture. The current study aimed to elaborate a biphasic scaffold using DWE based on two polycaprolactone solutions with interesting properties for bone and cement regeneration. One of the two scaffold parts contained hydroxyapatite nanoparticles (HAP) and the other contained the cementum protein 1 (CEMP1). After morphological characterizations, the elaborated scaffolds were assessed regarding periodontal ligament (PDL) cells in terms of cell proliferation, colonization, and mineralization ability. The results demonstrated that both HAP- and CEMP1-functionalized scaffolds were colonized by PDL cells and enhanced mineralization ability compared to unfunctionalized scaffolds, as revealed by alizarin red staining and OPN protein fluorescent expression. Taken together, the current data highlighted the potential of functional and organized scaffolds to stimulate bone and cementum regeneration. Moreover, DWE could be used to develop smart scaffolds with the ability to spatially control cellular orientation with suitable cellular activity at the micrometer scale, thereby enhancing periodontal and other complex tissue regeneration.
Collapse
Affiliation(s)
- Laura Bourdon
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
| | - Nina Attik
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
- Faculté d'Odontologie, Université Lyon 1, 11 Rue Guillaume Paradin, 69008 Lyon, France
| | - Liza Belkessam
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
- Faculté d'Odontologie, Université Lyon 1, 11 Rue Guillaume Paradin, 69008 Lyon, France
| | - Charlène Chevalier
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
- Faculté d'Odontologie, Université Lyon 1, 11 Rue Guillaume Paradin, 69008 Lyon, France
| | - Colin Bousige
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
| | - Arnaud Brioude
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
| | - Vincent Salles
- Laboratoire des Multimatériaux et Interfaces, UMR 5615, CNRS, Université Claude Bernard Lyon 1, Bâtiment Chevreul, 6 Rue Victor Grignard, 69622 Villeurbanne, France
- LIMMS, CNRS-IIS UMI 2820, The University of Tokyo, Tokyo 153-8505, Japan
- Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan
| |
Collapse
|
3
|
Gauthier R, Attik N, Chevalier C, Salles V, Grosgogeat B, Gritsch K, Trunfio-Sfarghiu AM. 3D Electrospun Polycaprolactone Scaffolds to Assess Human Periodontal Ligament Cells Mechanobiological Behaviour. Biomimetics (Basel) 2023; 8:biomimetics8010108. [PMID: 36975338 PMCID: PMC10046578 DOI: 10.3390/biomimetics8010108] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2023] [Revised: 03/02/2023] [Accepted: 03/04/2023] [Indexed: 03/29/2023] Open
Abstract
While periodontal ligament cells are sensitive to their 3D biomechanical environment, only a few 3D in vitro models have been used to investigate the periodontal cells mechanobiological behavior. The objective of the current study was to assess the capability of a 3D fibrous scaffold to transmit a mechanical loading to the periodontal ligament cells. Three-dimensional fibrous polycaprolactone (PCL) scaffolds were synthetized through electrospinning. Scaffolds seeded with human periodontal cells (103 mL-1) were subjected to static (n = 9) or to a sinusoidal axial compressive loading in an in-house bioreactor (n = 9). At the end of the culture, the dynamic loading seemed to have an influence on the cells' morphology, with a lower number of visible cells on the scaffolds surface and a lower expression of actin filament. Furthermore, the dynamic loading presented a tendency to decrease the Alkaline Phosphatase activity and the production of Interleukin-6 while these two biomolecular markers were increased after 21 days of static culture. Together, these results showed that load transmission is occurring in the 3D electrospun PCL fibrous scaffolds, suggesting that it can be used to better understand the periodontal ligament cells mechanobiology. The current study shows a relevant way to investigate periodontal mechanobiology using 3D fibrous scaffolds.
Collapse
Affiliation(s)
- Rémy Gauthier
- UCBL, MATEIS UMR CNRS 5510, Bât. Saint Exupéry, Univ Lyon, CNRS, INSA de Lyon, 23 Av. Jean Capelle, 69621 Villeurbanne, France
| | - Nina Attik
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Univ Lyon, Université Claude Bernard Lyon 1, 69622 Villeurbanne, France
- Faculté d'Odontologie, Univ Lyon, Université Claude Bernard Lyon 1, 69008 Lyon, France
| | - Charlène Chevalier
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Univ Lyon, Université Claude Bernard Lyon 1, 69622 Villeurbanne, France
| | - Vincent Salles
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Univ Lyon, Université Claude Bernard Lyon 1, 69622 Villeurbanne, France
- Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan
- LIMMS, CNRS-IIS UMI 2820, The University of Tokyo, Tokyo 153-8505, Japan
| | - Brigitte Grosgogeat
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Univ Lyon, Université Claude Bernard Lyon 1, 69622 Villeurbanne, France
- Faculté d'Odontologie, Univ Lyon, Université Claude Bernard Lyon 1, 69008 Lyon, France
- Hospices Civils de Lyon, Service d'Odontologie, 69008 Lyon, France
| | - Kerstin Gritsch
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Univ Lyon, Université Claude Bernard Lyon 1, 69622 Villeurbanne, France
- Faculté d'Odontologie, Univ Lyon, Université Claude Bernard Lyon 1, 69008 Lyon, France
- Hospices Civils de Lyon, Service d'Odontologie, 69008 Lyon, France
| | | |
Collapse
|
4
|
Dejob L, Toury B, Tadier S, Grémillard L, Gaillard C, Salles V. Electrospinning of in situ synthesized silica-based and calcium phosphate bioceramics for applications in bone tissue engineering: A review. Acta Biomater 2021; 123:123-153. [PMID: 33359868 DOI: 10.1016/j.actbio.2020.12.032] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2020] [Revised: 12/10/2020] [Accepted: 12/15/2020] [Indexed: 02/07/2023]
Abstract
The field of bone tissue engineering (BTE) focuses on the repair of bone defects that are too large to be restored by the natural healing process. To that purpose, synthetic materials mimicking the natural bone extracellular matrix (ECM) are widely studied and many combinations of compositions and architectures are possible. In particular, the electrospinning process can reproduce the fibrillar structure of bone ECM by stretching a viscoelastic solution under an electrical field. With this method, nano/micrometer-sized fibres can be produced, with an adjustable chemical composition. Therefore, by shaping bioactive ceramics such as silica, bioactive glasses and calcium phosphates through electrospinning, promising properties for their use in BTE can be obtained. This review focuses on the in situ synthesis and simultaneous electrospinning of bioceramic-based fibres while the reasons for using each material are correlated with its bioactivity. Theoretical and practical considerations for the synthesis and electrospinning of these materials are developed. Finally, investigations into the in vitro and in vivo bioactivity of different systems using such inorganic fibres are exposed.
Collapse
Affiliation(s)
- Léa Dejob
- Laboratoire des Multimatériaux et Interfaces, UMR CNRS 5615, Univ Lyon, Université Claude Bernard Lyon 1, Villeurbanne F-69622, France; Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR 5510, Villeurbanne F-69621, France
| | - Bérangère Toury
- Laboratoire des Multimatériaux et Interfaces, UMR CNRS 5615, Univ Lyon, Université Claude Bernard Lyon 1, Villeurbanne F-69622, France
| | - Solène Tadier
- Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR 5510, Villeurbanne F-69621, France
| | - Laurent Grémillard
- Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR 5510, Villeurbanne F-69621, France
| | - Claire Gaillard
- Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR 5510, Villeurbanne F-69621, France
| | - Vincent Salles
- Laboratoire des Multimatériaux et Interfaces, UMR CNRS 5615, Univ Lyon, Université Claude Bernard Lyon 1, Villeurbanne F-69622, France.
| |
Collapse
|
5
|
Abstract
The use of contactless magnetic forces meets numerous needs in microelectromechanical systems (MEMS) or microfluidic devices. In this view, heterogeneous materials integrating magnetic nanostructures within a non-magnetic matrix such as polymer can produce local variations of magnetic field, at the sub-micrometer scale. Here we report on the synthesis of magnetic composites using electrospun nanofilaments and a polydimethylsiloxane (PDMS) matrix. Varying the precursor nature and heat treatment conditions, we obtained single phase filaments of Fe, FeNi, and MFe2O4 (M = Co, Fe, Ni). Thanks to a fine investigation of their structure and morphology, it was possible to measure from magnetically-soft (µ0HC ⩽ 5 mT) to relatively hard (µ0HC up to 93 mT, MR/MS up to 0.5) behaviors. The common one-dimensional shape of these filaments leads to an anisotropic magnetic response. This can be exploited to achieve self-organization of the filaments in arrays within the non-magnetic matrix. We show the first step towards the development of magnetically anisotropic membranes of PDMS with 0.23 wt% Fe filaments. These composite materials are promising for implementing magnetic functions in microsystems while circumventing complex micro-fabrication steps.
Collapse
Affiliation(s)
- Laurence Ourry
- Univ Lyon, Université Claude Bernard Lyon1, Laboratoire des Multimatériaux et Interfaces, UMR CNRS 5615, F-69622, Villeurbanne, France. Univ Lyon, Université Claude Bernard Lyon1, Institut des Nanotechnologies de Lyon INL, UMR CNRS 5270, F-69622, Villeurbanne, France
| | | | | | | | | | | |
Collapse
|
6
|
Pouponneau P, Perrey O, Brunon C, Grossiord C, Courtois N, Salles V, Alves A. Electrospun Bioresorbable Membrane Eluting Chlorhexidine for Dental Implants. Polymers (Basel) 2020; 12:polym12010066. [PMID: 31906503 PMCID: PMC7023585 DOI: 10.3390/polym12010066] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2019] [Revised: 12/19/2019] [Accepted: 12/20/2019] [Indexed: 12/22/2022] Open
Abstract
To prevent the uncontrolled development of a pathogenic biofilm around a dental implant, an antimicrobial drug-release electrospun membrane, set up between the implant and the gingival tissue, was developed by taking several technical, industrial and regulatory specifications into account. The membrane formulation is made of a blend of poly(l-lactic–co–gycolic acid) (PLGA, 85:15) and poly(l-lactic acide–co–ɛ-caprolactone) (PLC, 70:30) copolymers with chlorhexidine diacetate (CHX) complexed with β-cyclodextrin (CD). The amount of residual solvent, the mechanical properties and the drug release kinetics were tuned by the copolymers’ ratio, between 30% and 100% of PLC, and a CHX loading up to 20% w/w. The membranes were sterilized by γ-irradiation without significant property changes. The fiber′s diameter was between 600 nm and 3 µm, depending on the membrane composition and the electrospinning parameters. CHX was released in vitro over 10 days and the bacterial inhibitory concentration, 80 µg·mL−1, was reached within eight days. The optimal membrane, PGLA/PLC/CHX-CD (60%/40%/4%), exhibited a breaking strain of 50%, allowing its safe handling. This membrane and a membrane without CHX-CD were implanted subcutaneous in a rat model. The cell penetration remained low. The next step will be to increase the porosity of the membrane to improve the dynamic cell penetration and tissue remodeling.
Collapse
Affiliation(s)
- Pierre Pouponneau
- Statice, 25000 Besançon, France;
- Correspondence: ; Tel.: +33-(0)381484343
| | | | - Céline Brunon
- Science et Surface, 69130 Écully, France; (C.B.); (C.G.)
| | | | | | - Vincent Salles
- Univ Lyon, Université Claude Bernard Lyon1, Laboratoire des Multimatériaux et Interfaces, UMR CNRS 5615, F-69622 Villeurbanne, France;
| | | |
Collapse
|
7
|
Bourdon L, Maurin JC, Gritsch K, Brioude A, Salles V. Improvements in Resolution of Additive Manufacturing: Advances in Two-Photon Polymerization and Direct-Writing Electrospinning Techniques. ACS Biomater Sci Eng 2018; 4:3927-3938. [DOI: 10.1021/acsbiomaterials.8b00810] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Affiliation(s)
- Laura Bourdon
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Laboratoire des Multimatériaux et Interfaces, F-69622 Villeurbanne, France
| | - Jean-Christophe Maurin
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Laboratoire des Multimatériaux et Interfaces, F-69622 Villeurbanne, France
- Faculté d’Odontologie, Université Claude Bernard Lyon 1, Lyon, France
| | - Kerstin Gritsch
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Laboratoire des Multimatériaux et Interfaces, F-69622 Villeurbanne, France
- Faculté d’Odontologie, Université Claude Bernard Lyon 1, Lyon, France
| | - Arnaud Brioude
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Laboratoire des Multimatériaux et Interfaces, F-69622 Villeurbanne, France
| | - Vincent Salles
- Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Laboratoire des Multimatériaux et Interfaces, F-69622 Villeurbanne, France
| |
Collapse
|
8
|
Leroy A, Ribeiro S, Grossiord C, Alves A, Vestberg RH, Salles V, Brunon C, Gritsch K, Grosgogeat B, Bayon Y. FTIR microscopy contribution for comprehension of degradation mechanisms in PLA-based implantable medical devices. J Mater Sci Mater Med 2017; 28:87. [PMID: 28470445 DOI: 10.1007/s10856-017-5894-7] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2017] [Accepted: 04/17/2017] [Indexed: 06/07/2023]
Abstract
The integration and evolution of implantable medical devices made of bioresorbable polymers and used for temporary biomedical applications are crucial criteria in the success of a therapy and means of follow-up after implantation are needed. The objective of this work is to develop and evaluate a method based on microscopic Fourier Transform InfraRed spectroscopy (FTIR) mappings to monitor the degradation of such polymers on tissue explant sections, after implantation. This technique provided information on their location and on both their composition and crystallinity, which is directly linked to their state of degradation induced predominantly by chain scissions. An in vitro study was first performed on poly(L-lactic acid) (PLLA) meshes to validate the procedure and the assumption that changes observed on FTIR spectra are indeed a consequence of degradation. Then, mappings of in vivo degraded PLLA meshes were realized to follow up their degradation and to better visualize their degradation mechanisms. This work further warrants its translation to medical implants made of copolymers of lactic acid and to other polyesters.
Collapse
Affiliation(s)
- Adrien Leroy
- Laboratoire des Multimatériaux et Interfaces, UMR 5615 CNRS-Université Lyon 1, Université de Lyon, 43 bd du 11 Novembre 1918, Villeurbanne, Cedex 69622, France
| | - Sofia Ribeiro
- Medtronic-Sofradim Production, 116 Avenue du Formans, Trévoux, 01600, France
| | - Carole Grossiord
- Science et Surface, 64 Chemin des Mouilles, Écully, 69130, France
| | - Antoine Alves
- NAMSA France, 115 Chemin de l'Islon, Chasse-sur-Rhône, 38670, France
| | - Robert H Vestberg
- Medtronic-Sofradim Production, 116 Avenue du Formans, Trévoux, 01600, France
| | - Vincent Salles
- Laboratoire des Multimatériaux et Interfaces, UMR 5615 CNRS-Université Lyon 1, Université de Lyon, 43 bd du 11 Novembre 1918, Villeurbanne, Cedex 69622, France
| | - Céline Brunon
- Science et Surface, 64 Chemin des Mouilles, Écully, 69130, France
| | - Kerstin Gritsch
- Laboratoire des Multimatériaux et Interfaces UMR CNRS 5615, UFR Odontologie, Université Lyon 1, Université de Lyon, Lyon, 69008, France
| | - Brigitte Grosgogeat
- Laboratoire des Multimatériaux et Interfaces UMR CNRS 5615, UFR Odontologie, Université Lyon 1, Université de Lyon, Lyon, 69008, France
| | - Yves Bayon
- Medtronic-Sofradim Production, 116 Avenue du Formans, Trévoux, 01600, France.
| |
Collapse
|
9
|
Rybak A, Gaska K, Kapusta C, Toche F, Salles V. Epoxy composites with ceramic core-shell fillers for thermal management in electrical devices. POLYM ADVAN TECHNOL 2017. [DOI: 10.1002/pat.4038] [Citation(s) in RCA: 23] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Andrzej Rybak
- ABB Corporate Research Center; Starowislna 13A 31-038 Kraków Poland
| | - Karolina Gaska
- Faculty of Physics and Applied Computer Science, Department of Solid State Physics; AGH University of Science and Technology; Mickiewicza 30 30-059 Kraków Poland
| | - Czeslaw Kapusta
- Faculty of Physics and Applied Computer Science, Department of Solid State Physics; AGH University of Science and Technology; Mickiewicza 30 30-059 Kraków Poland
| | - François Toche
- Laboratoire des Multimatériaux et Interfaces, UMR 5615 CNRS - Université Lyon 1; Université de Lyon; 43 bd du 11 Novembre 1918 69622 Villeurbanne Cedex France
| | - Vincent Salles
- Laboratoire des Multimatériaux et Interfaces, UMR 5615 CNRS - Université Lyon 1; Université de Lyon; 43 bd du 11 Novembre 1918 69622 Villeurbanne Cedex France
| |
Collapse
|
10
|
Bessaire B, Mathieu M, Salles V, Yeghoyan T, Celle C, Simonato JP, Brioude A. Synthesis of Continuous Conductive PEDOT:PSS Nanofibers by Electrospinning: A Conformal Coating for Optoelectronics. ACS Appl Mater Interfaces 2017; 9:950-957. [PMID: 27973763 DOI: 10.1021/acsami.6b13453] [Citation(s) in RCA: 29] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
A process to synthesize continuous conducting nanofibers were developed using PEDOT:PSS as a conducting polymer and an electrospinning method. Experimental parameters were carefully explored to achieve reproducible conductive nanofibers synthesis in large quantities. In particular, relative humidity during the electrospinning process was proven to be of critical importance, as well as doping post-treatment involving glycols and alcohols. The synthesized fibers were assembled as a mat on glass substrates, forming a conductive and transparent electrode and their optoelectronic have been fully characterized. This method produces a conformable conductive and transparent coating that is well-adapted to nonplanar surfaces, having very large aspect ratio features. A demonstration of this property was made using surfaces having deep trenches and high steps, where conventional transparent conductive materials fail because of a lack of conformability.
Collapse
Affiliation(s)
- Bastien Bessaire
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interface, Université Claude Bernard LYON1, Université de Lyon , F-69622 Villeurbanne, France
- CEA, LITEN/DTNM/SEN/LSIN, Université de Grenoble Alpes , F-38054 Grenoble, France
| | - Maillard Mathieu
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interface, Université Claude Bernard LYON1, Université de Lyon , F-69622 Villeurbanne, France
| | - Vincent Salles
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interface, Université Claude Bernard LYON1, Université de Lyon , F-69622 Villeurbanne, France
| | - Taguhi Yeghoyan
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interface, Université Claude Bernard LYON1, Université de Lyon , F-69622 Villeurbanne, France
| | - Caroline Celle
- CEA, LITEN/DTNM/SEN/LSIN, Université de Grenoble Alpes , F-38054 Grenoble, France
| | - Jean-Pierre Simonato
- CEA, LITEN/DTNM/SEN/LSIN, Université de Grenoble Alpes , F-38054 Grenoble, France
| | - Arnaud Brioude
- UMR CNRS 5615, Laboratoire des Multimatériaux et Interface, Université Claude Bernard LYON1, Université de Lyon , F-69622 Villeurbanne, France
| |
Collapse
|
11
|
Marichy C, Salles V, Jaurand X, Etiemble A, Douillard T, Faugier-Tovar J, Cauwet F, Brioude A. Fabrication of BN membranes containing high density of cylindrical pores using an elegant approach. RSC Adv 2017. [DOI: 10.1039/c7ra03808a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
BN membrane with high density of through cylindrical pores is fabricated by combination of ALD and PDC routes. With good quality h-BN walls obtained at 1000 °C, the obtained membrane is a promising candidate for osmotic energy conversion and water filtration applications.
Collapse
Affiliation(s)
- C. Marichy
- Univ Lyon
- Université Claude Bernard Lyon 1
- Laboratoire des Multimatériaux et Interfaces
- UMR CNRS 5615
- F-69622 Villeurbanne
| | - V. Salles
- Univ Lyon
- Université Claude Bernard Lyon 1
- Laboratoire des Multimatériaux et Interfaces
- UMR CNRS 5615
- F-69622 Villeurbanne
| | - X. Jaurand
- Centre Technologique des Microstructures
- Université de Lyon
- Villeurbanne
- France
| | - A. Etiemble
- Univ Lyon
- INSA Lyon
- MATEIS UMR CNRS 5510
- F-69621 Villeurbanne
- France
| | - T. Douillard
- Univ Lyon
- INSA Lyon
- MATEIS UMR CNRS 5510
- F-69621 Villeurbanne
- France
| | - J. Faugier-Tovar
- Univ Lyon
- Université Claude Bernard Lyon 1
- Laboratoire des Multimatériaux et Interfaces
- UMR CNRS 5615
- F-69622 Villeurbanne
| | - F. Cauwet
- Univ Lyon
- Université Claude Bernard Lyon 1
- Laboratoire des Multimatériaux et Interfaces
- UMR CNRS 5615
- F-69622 Villeurbanne
| | - A. Brioude
- Univ Lyon
- Université Claude Bernard Lyon 1
- Laboratoire des Multimatériaux et Interfaces
- UMR CNRS 5615
- F-69622 Villeurbanne
| |
Collapse
|
12
|
Ben Moussa N, Pontnau F, Salles V, Boudjemline Y, Legendre A, Iserin L, Bonnet D, Ladouceur M. Risk factor for Heart failure admissions in adults with congenital heart disease in monocentric tertiary center. Archives of Cardiovascular Diseases Supplements 2016. [DOI: 10.1016/s1878-6480(16)30559-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
13
|
Diaham S, Saysouk F, Locatelli ML, Belkerk B, Scudeller Y, Chiriac R, Toche F, Salles V. Thermal conductivity of polyimide/boron nitride nanocomposite films. J Appl Polym Sci 2015. [DOI: 10.1002/app.42461] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Sombel Diaham
- Université de Toulouse, UPS, INPT; LAPLACE (Laboratoire Plasma et Conversion d'Energie), 118 Route de Narbonne-Bât. 3R3; F-31062 Toulouse cedex 9 France
- CNRS; LAPLACE; F-31062 Toulouse France
| | - François Saysouk
- Université de Toulouse, UPS, INPT; LAPLACE (Laboratoire Plasma et Conversion d'Energie), 118 Route de Narbonne-Bât. 3R3; F-31062 Toulouse cedex 9 France
- CNRS; LAPLACE; F-31062 Toulouse France
| | - Marie-Laure Locatelli
- Université de Toulouse, UPS, INPT; LAPLACE (Laboratoire Plasma et Conversion d'Energie), 118 Route de Narbonne-Bât. 3R3; F-31062 Toulouse cedex 9 France
- CNRS; LAPLACE; F-31062 Toulouse France
| | - Boubakeur Belkerk
- Université de Nantes; Ecole Polytechnique, IMN (Institut des Matériaux Jean Rouxel); Rue C. Pauc, La Chantrerie, BP 50609 44306 Nantes France
| | - Yves Scudeller
- Université de Nantes; Ecole Polytechnique, IMN (Institut des Matériaux Jean Rouxel); Rue C. Pauc, La Chantrerie, BP 50609 44306 Nantes France
| | - Rodica Chiriac
- Université Lyon 1, UCBL; LMI (Laboratoire des Multimatériaux et Interfaces); 43 Bd du 11 Novembre 1918 69622 Villeurbanne Cedex France
| | - François Toche
- Université Lyon 1, UCBL; LMI (Laboratoire des Multimatériaux et Interfaces); 43 Bd du 11 Novembre 1918 69622 Villeurbanne Cedex France
| | - Vincent Salles
- Université Lyon 1, UCBL; LMI (Laboratoire des Multimatériaux et Interfaces); 43 Bd du 11 Novembre 1918 69622 Villeurbanne Cedex France
| |
Collapse
|
14
|
Gerges T, Salles V, Bernard S, Journet C, Jaurand X, Chiriac R, Ferro G, Brioude A. AlN hollow-nanofilaments by electrospinning. Nanotechnology 2015; 26:085603. [PMID: 25649161 DOI: 10.1088/0957-4484/26/8/085603] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
We present for the first time an original method to elaborate AlN nanofilaments (NFs) by using a preceramic-based electrospinning process. Initially, an Al-containing precursor (poly(ethylimino)alane) is mixed with an organic spinnable polymer to be electrospun and generate polymeric filaments with a homogeneous diameter. A ceramization step at 1000 °C under ammonia and a crystallization step at 1400 °C under nitrogen are performed to get the final product made of AlN NFs with a diameter ranging from 150 to 200 nm. Studies carried out by high resolution electron microscopy and 3D tomography show their regular morphology, with high chemical purity and polycrystalline nature.
Collapse
Affiliation(s)
- Tony Gerges
- Laboratoire des Multimatériaux et Interfaces (UMR 5615 Université Lyon 1-CNRS), 43 Bd du 11 novembre 1918, F-69622, Villeurbanne Cedex, France
| | | | | | | | | | | | | | | |
Collapse
|
15
|
Campos DM, Gritsch K, Salles V, Attik GN, Grosgogeat B. Surface Entrapment of Fibronectin on Electrospun PLGA Scaffolds for Periodontal Tissue Engineering. Biores Open Access 2014; 3:117-26. [PMID: 24940563 PMCID: PMC4048976 DOI: 10.1089/biores.2014.0015] [Citation(s) in RCA: 46] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
Abstract
Nowadays, the challenge in the tissue engineering field consists in the development of biomaterials designed to regenerate ad integrum damaged tissues. Despite the current use of bioresorbable polyesters such as poly(l-lactide) (PLA), poly(d,l-lactide-co-glycolide) (PLGA), and poly-ɛ-caprolactone in soft tissue regeneration researches, their hydrophobic properties negatively influence the cell adhesion. Here, to overcome it, we have developed a fibronectin (FN)-functionalized electrospun PLGA scaffold for periodontal ligament regeneration. Functionalization of electrospun PLGA scaffolds was performed by alkaline hydrolysis (0.1 or 0.01 M NaOH). Then, hydrolyzed scaffolds were coated by simple deposition of an FN layer (10 μg/mL). FN coating was evidenced by X-ray photoelectron analysis. A decrease of contact angle and greater cell adhesion to hydrolyzed, FN-coated PLGA scaffolds were noticed. Suitable degradation behavior without pH variations was observed for all samples up to 28 days. All treated materials presented strong shrinkage, fiber orientation loss, and collapsed fibers. However, functionalization process using 0.01 M NaOH concentration resulted in unchanged scaffold porosity, preserved chemical composition, and similar mechanical properties compared with untreated scaffolds. The proposed simplified method to functionalize electrospun PLGA fibers is an efficient route to make polyester scaffolds more biocompatible and shows potential for tissue engineering.
Collapse
Affiliation(s)
- Doris M Campos
- Laboratoire des Multimatériaux et Interfaces CNRS UMR 5615, Université Lyon 1 , Villeurbanne, France . ; UFR d'odontologie, Université Lyon 1 , Villeurbanne, France
| | - Kerstin Gritsch
- Laboratoire des Multimatériaux et Interfaces CNRS UMR 5615, Université Lyon 1 , Villeurbanne, France . ; UFR d'odontologie, Université Lyon 1 , Villeurbanne, France . ; Centre de Soins, d'Enseignement et de Recherche Dentaires (Département de Parodontologie), Université Lyon 1 , Villeurbanne, France
| | - Vincent Salles
- Laboratoire des Multimatériaux et Interfaces CNRS UMR 5615, Université Lyon 1 , Villeurbanne, France
| | - Ghania N Attik
- Laboratoire des Multimatériaux et Interfaces CNRS UMR 5615, Université Lyon 1 , Villeurbanne, France
| | - Brigitte Grosgogeat
- Laboratoire des Multimatériaux et Interfaces CNRS UMR 5615, Université Lyon 1 , Villeurbanne, France . ; UFR d'odontologie, Université Lyon 1 , Villeurbanne, France . ; Centre de Soins, d'Enseignement et de Recherche Dentaires (Département de Santé Publique), Université Lyon 1 , Villeurbanne, France
| |
Collapse
|
16
|
|
17
|
Bernard S, Salles V, Li J, Brioude A, Bechelany M, Demirci UB, Miele P. High-yield synthesis of hollow boron nitride nano-polyhedrons. ACTA ACUST UNITED AC 2011. [DOI: 10.1039/c1jm10774g] [Citation(s) in RCA: 40] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
18
|
Eid C, Brioude A, Salles V, Plenet JC, Asmar R, Monteil Y, Khoury R, Khoury A, Miele P. Iron-based 1D nanostructures by electrospinning process. Nanotechnology 2010; 21:125701. [PMID: 20182009 DOI: 10.1088/0957-4484/21/12/125701] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
Iron-based 1D nanostructures have been successfully prepared using an electrospinning technique and varying the pyrolysis atmospheres. Hematite (Fe(2)O(3)) nanotubes and polycrystalline Fe(3)C nanofibers were obtained by simple air or mixed gas (H(2), Ar) annealing treatments. Using the air annealing treatment, a high control of the morphology as well as of the wall thickness of the nanotubes was demonstrated with a direct influence of the starting polymer concentration. When mixed gases (H(2) and Ar) were used for the annealing treatments, for the first time polycrystalline Fe(3)C nanofibers composed of carbon graphitic planes were obtained, ensuring Fe(3)C nanoparticle stability and nanofiber cohesion. The morphology and structural properties of all these iron-based 1D nanostructures were fully characterized by SEM, TEM, XRD and Raman spectroscopy.
Collapse
Affiliation(s)
- Cynthia Eid
- Laboratoire de Physique Appliquée (LPA) associé à l'école doctorale des Sciences et Technologies, Département de Physique, Université Libanaise, Faculté des Sciences II, 90656 Jdeidet El Metn, Lebanon
| | | | | | | | | | | | | | | | | |
Collapse
|
19
|
Salles V, Bernard S, Brioude A, Cornu D, Miele P. A new class of boron nitride fibers with tunable properties by combining an electrospinning process and the polymer-derived ceramics route. Nanoscale 2010; 2:215-217. [PMID: 20644796 DOI: 10.1039/b9nr00185a] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
Novel boron nitride (BN) fibers have been developed with diameters ranging from the nano- to microscale by thermal conversion of as-electrospun fibers from polyacrylonitrile and poly[B-(methylamino)borazine] blend solutions. Such a new class of ceramic fibers is seen as potential candidate for thermal management applications and filtration systems in harsh environments.
Collapse
Affiliation(s)
- Vincent Salles
- Laboratoire des Multimatériaux et Interfaces, UMR 5615 CNRS-Université Lyon 1, Université de Lyon, 43 bd du 11 Novembre 1918, 69622 Villeurbanne Cedex, France.
| | | | | | | | | |
Collapse
|