Electrothermal Performance of Heaters Based on Laser-Induced Graphene on Aramid Fabric

Nanostructured heaters based on laser-induced graphene (LIG) are promising for heat generation and temperature control in a variety of applications due to their high efficiency as well as a fast, facile, and highly scalable fabrication process. While recent studies have shown that LIG can be written on a wide range of precursors, the reports on LIG-based heaters are mainly limited to polyimide film substrates. Here, we develop and characterize nanostructured heaters by direct writing of laser-induced graphene on nonuniform and structurally porous aramid woven fabric. The synthesis and writing of graphene on aramid fabric is conducted using a 10.6 μm CO₂ laser. The quality of laser-induced graphene and electrical properties of the heater fabric is tuned by controlling the lasing process parameters. Produced heaters exhibit good electrothermal efficiency with steady-state temperatures up to 170 °C when subjected to an input power density of 1.5 W cm^-2. In addition, the permeable texture of LIG-aramid fabric heaters allows for easy impregnation with thermosetting resins. We demonstrate the encapsulation of fabric heaters with two different types of thermosetting resins to develop both flexible and stiff composites. A flexible heater is produced by the impregnation of LIG-aramid fabric by silicone rubber. While the flexible composite heater exhibits inferior electrothermal performance compared to neat LIG-aramid fabric, it shows consistent electrothermal performance under various electrical and mechanical loading conditions. A multifunctional fiber-reinforced composite panel with integrated de-icing functionality is also manufactured using one ply of LIG-aramid fabric heater as part of the composite layup. The results of de-icing experiments show excellent de-icing capability, where a 5 mm thick piece of ice is completely melted away within 2 min using an input power of 12.8 W.

Local Substrate Heterogeneity Influences Electrochemical Activity of TEM Grid-Supported Battery Particles

Understanding how particle size and morphology influence ion insertion dynamics is critical for a wide range of electrochemical applications including energy storage and electrochromic smart windows. One strategy to reveal such structure–property relationships is to perform ex situ transmission electron microscopy (TEM) of nanoparticles that have been cycled on TEM grid electrodes. One drawback of this approach is that images of some particles are correlated with the electrochemical response of the entire TEM grid electrode. The lack of one-to-one electrochemical-to-structural information complicates interpretation of genuine structure/property relationships. Developing high-throughput ex situ single particle-level analytical techniques that effectively link electrochemical behavior with structural properties could accelerate the discovery of critical structure-property relationships. Here, using Li-ion insertion in WO₃ nanorods as a model system, we demonstrate a correlated optically-detected electrochemistry and TEM technique that measures electrochemical behavior of via many particles simultaneously without having to make electrical contacts to single particles on the TEM grid. This correlated optical-TEM approach can link particle structure with electrochemical behavior at the single particle-level. Our measurements revealed significant electrochemical activity heterogeneity among particles. Single particle activity correlated with distinct local mechanical or electrical properties of the amorphous carbon film of the TEM grid, leading to active and inactive particles. The results are significant for correlated electrochemical/TEM imaging studies that aim to reveal structure-property relationships using single particle-level imaging and ensemble-level electrochemistry.

Ensemble-level energy transfer measurements can reveal the spatial distribution of defect sites in semiconductor nanocrystals

Energy transfer measurements are widely used to measure the distance between donors and acceptors in heterogeneous environments. In nanocrystal (NC)-molecule donor-acceptor systems, NC defects can participate in electronic energy transfer (EnT) in a defect-mediated EnT process. Here, we explore whether ensemble-level spectroscopy measurements can quantify the distance between the donor defect sites in the NC and acceptor molecules. We studied defect-mediated EnT between ZnO NCs and Alexa Fluor 555 (A555) because EnT occurs via emissive NC defect sites, such as oxygen vacancies. We synthesized a size series of ZnO NCs and characterized their radii, concentration, photoluminescence (PL) lifetime, and defect PL quantum yield using a combination of transmission electron microscopy, elemental analysis, and time-resolved PL spectroscopy. The ZnO defect PL decay kinetics were analyzed using the stochastic binding (SB) and restricted geometry (RG) models. Both models assume the Förster point dipole approximation, but the RG model considers the geometry of the NC donor in the presence of multiple acceptors. The RG model revealed that the emissive defect sites are separated, on average, 0.5 nm from the A555 acceptor molecules. That is, the emissive defect sites are predominantly located at or near the surface of large NCs. The SB model revealed the average number of A555 molecules per NC and the equilibrium binding constant but did not provide meaningful information regarding the defect-acceptor distance. We conclude that ensemble-level EnT measurements can reveal the spatial distribution of defect sites in NCs without the need for interrogating the sample with a microscope.

Metalloid Reductase Activity Modified by a Fused Se0 Binding Peptide

A selenium nanoparticle binding peptide was isolated from a phage display library and genetically fused to a metalloid reductase that reduces selenite (SeO₃^2-) to a Se⁰ nanoparticle (SeNP) form. The fusion of the Se binding peptide to the metalloid reductase regulates the size of the resulting SeNP to ∼35 nm average diameter, where without the peptide, SeNPs grow to micron sized polydisperse precipitates. The SeNP product remains associated with the enzyme/peptide fusion. The Se binding peptide fusion to the enzyme increases the enzyme's SeO₃^2- reductase activity. Size control of particles was diminished if the Se binding peptide was only added exogenously to the reaction mixture. The enzyme-peptide construct shows preference for binding smaller SeNPs. The peptide-SeNP interaction is attributed to His based ligation that results in a peptide conformational change on the basis of Raman spectroscopy.

Influence of the Substrate on the Optical and Photo-electrochemical Properties of Monolayer MoS2

Substrates influence the electrical and optical properties of monolayer (ML) MoS₂ in field-effect transistors and photodetectors. Photoluminescence (PL) and Raman spectroscopy measurements have shown that conducting substrates can vary the doping concentration and influence exciton decay channels in ML-MoS₂. Doping and exciton decay dynamics are expected to play a major role in the efficiency of light-driven chemical reactions, but it is unclear to what extent these factors contribute to the photo(electro)catalytic properties of ML-MoS₂. Here, we report spatially resolved PL, Raman, and photo-electrochemical current measurements of 5-10 μm-wide ML-MoS₂ triangles deposited on pairs of indium-doped tin oxide (ITO) electrodes that are separated by a narrow insulating quartz channel [i.e., an ITO interdigitated array (IDA) electrode]. Optical microscopy images and atomic force microscopy measurements revealed that the ML-MoS₂ triangles lie conformally on the quartz and ITO substrates. The PL spectrum of MoS₂ shifts and decreases in intensity in the ITO region, which can be attributed to differences in nonradiative and radiative exciton decay channels. Raman spectra showed no significant peak shifts on the two substrates that would have indicated a substrate-induced doping effect. We spatially resolved the photo-electrochemical current because of hole-induced iodide oxidation and observed that ML-MoS₂ produces lower photocurrents in the quartz region than in the ITO region. The correlated PL, Raman, and photocurrent mapping data show that the MoS₂/quartz interface diminishes fast nonradiative exciton decay pathways but the photocurrent response in the quartz region is likely limited by inefficient in-plane carrier transport to the ITO electrode because of carrier recombination with S vacancies in MoS₂ or charged impurities in the quartz substrate. Nonetheless, the experimental methodology presented herein provides a framework to evaluate substrate engineering strategies to tune the (photo)electrocatalytic properties of two-dimensional materials.

High-Throughput Single-Nanoparticle-Level Imaging of Electrochemical Ion Insertion Reactions

Nanoparticle electrodes are attractive for electrochemical energy storage applications because their nanoscale dimensions decrease ion transport distances and generally increase ion insertion/extraction efficiency. However, nanoparticles vary in size, shape, defect density, and surface composition, which warrants their investigation at the single-nanoparticle level. Here we demonstrate a nondestructive high-throughput electro-optical imaging approach to quantitatively measure electrochemical ion insertion reactions at the single-nanoparticle level. Electro-optical measurements relate the optical density change of a nanoparticle to redox changes of elements in the particle under working electrochemical conditions. We benchmarked this technique by studying Li-ion insertion in hexagonal tungsten oxide (h-WO₃) nanorods during chronoamperometry and cyclic voltammetry. Interestingly, the optically detected current response revealed underlying processes that are hidden in the conventional electrochemical current measurements. This imaging technique may be applied to 13 nm particles and a wide range of electrochemical systems such as electrochromic smart windows, batteries, solid oxide fuel cells, and sensors.

Laser Annealing Improves the Photoelectrochemical Activity of Ultrathin MoSe2 Photoelectrodes

Understanding light-matter interactions in transition-metal dichalcogenides (TMDs) is critical for optoelectronic device applications. Several studies have shown that high intensity light irradiation can tune the optical and physical properties of pristine TMDs. The enhancement in optoelectronic properties has been attributed to a so-called laser annealing effect that heals chalcogen vacancies. However, it is unknown whether laser annealing improves functional properties such as photocatalytic activity. Here, we show that high intensity supra band gap illumination improves the photoelectrochemical activity of MoSe₂ nanosheets for iodide oxidation in indium doped tin oxide/MoSe₂/I^-, I₃^-/Pt liquid junction solar cells. Ensemble-level photoelectrochemical measurements show that, on average, illuminating MoSe₂ thin films with 1 W/cm² 532 nm excitation increases the photoelectrochemical current by 142% and shifts the photocurrent response to more favorable (negative) potentials. Scanning photoelectrochemical microscopy measurements reveal that pristine bilayer (2L)-MoSe₂, trilayer (3L)-MoSe₂, and multilayer-thick nanosheets are initially inactive for iodide oxidation. The light treatment activates 2L-MoSe₂ and 3L-MoSe₂ materials, and the activation process initiates at the edge sites. The photocurrent enhancement is more significant for 2L-MoSe₂ than for 1L-MoSe₂. Multilayer-thick MoSe₂ remains inactive for iodide oxidation even after the laser treatment. Our microscopy measurements reveal that the laser-induced enhancement effect depends critically on MoSe₂ layer thickness. X-ray photoelectron spectroscopy measurements further show that the laser treatment oxidizes Mo(IV) species that are initially associated with Se vacancies. Ambient oxygen fills the Se vacancies and removes trap states, thereby increasing the overall photogenerated carrier collection efficiency. To the best of our knowledge, this work represents the first report on using laser to enhance the photoelectrocatalytic properties of few-layer-thick TMDs. The simple and rapid laser annealing procedure is a promising strategy to tune the reactivity of TMD-based photoelectrochemical cells for electricity and chemical fuel production.

Distinguishing Nitro vs Nitrito Coordination in Cytochrome c' Using Vibrational Spectroscopy and Density Functional Theory

Nitrite coordination to heme cofactors is a key step in the anaerobic production of the signaling molecule nitric oxide (NO). An ambidentate ligand, nitrite has the potential to coordinate via the N- (nitro) or O- (nitrito) atoms in a manner that can direct its reactivity. Distinguishing nitro vs nitrito coordination, along with the influence of the surrounding protein, is therefore of particular interest. In this study, we probed Fe(III) heme-nitrite coordination in Alcaligenes xylosoxidans cytochrome c' (AXCP), an NO carrier that excludes anions in its native state but that readily binds nitrite (Kd ∼ 0.5 mM) following a distal Leu16 → Gly mutation to remove distal steric constraints. Room-temperature resonance Raman spectra (407 nm excitation) identify ν(Fe-NO2), δ(ONO), and νs(NO2) nitrite ligand vibrations in solution. Illumination with 351 nm UV light results in photoconversion to {FeNO}6 and {FeNO}7 states, enabling FTIR measurements to distinguish νs(NO2) and νas(NO2) vibrations from differential spectra. Density functional theory calculations highlight the connections between heme environment, nitrite coordination mode, and vibrational properties and confirm that nitrite binds to L16G AXCP exclusively through the N atom. Efforts to obtain the nitrite complex crystal structure were hampered by photochemistry in the X-ray beam. Although low dose crystal structures could be modeled with a mixed nitrite (nitro)/H2O distal population, their photosensitivity and partial occupancy underscores the value of the vibrational approach. Overall, this study sheds light on steric determinants of heme-nitrite binding and provides vibrational benchmarks for future studies of heme protein nitrite reactions.